GIBSTER-TT

Hi as above does anyone know the diameter of the rubber PCV pipes so i can order some hose adaptors. Thanks Dan

Not sure if your n/a clutch will fit to a TT box. But if it does it won't last long

That's a great help cheers peeps.

Hi all, Does anyone have the details on the size, threads and type of bolts that are used to fit the gearbox. Or does anyone have a set forsale? Thanks Dan

Way to cheap

I've had issues in the past when updating my profile can be a pain in the arse

Hi smithy, I've had the take offs removed and welded up when I had the pipes powder coated. Anyother ideas? Thanks Dan

Im after some ideas if possible? Ok i want to plumb a balance tube to even out the pressure before the throttle bodies as ive installed an FMIC. My problem is where to install it as i have no room on the pipe work close to the throttle bodies. I was looking into using alloy adaptors that you screw in to the silicone pipework but i cant even do that. Old pics here but gives you an idea.

They hold the diff in place mate. They are in the OEM bushes but have to be removed and re-used when fitting poly bushes.

Thanks so much mate i wasnt expecting you to clean them and primer them for me as well :) I can finally carry on with the fitting of the diff now. 1 step closer to finishing this long drawn out build. Cheers Dan

Hi bud just see your reply. I'll text you just reply when u can. Thanks

Not yet mate :(

Yea as vjay said sky insurance you can't beat them with modded zeds

Mines in the ash tray

http://www.vehicle-wiring-products.eu/VWP-onlinestore/connectors/housings.php Connector 4145 I used

I managed to mod my plugs I bought off eBay to fit my later type injectors. Can be done but I'm sure they are not universal.

As above paypal today

Hi Bud, Can you please text me or email me your paypal addy please as my subs has ran out and no longer have access to my PM's Thanks Dan dgbsn06@googlemail.com

Fully comp all mods declared and I mean everything. Insured for 15k with like for like replacement parts..3yr ncb with a sp30 790 pounds and im 29

Sky insurance i found to be the best

Ted the Zed

Nice bonnet. I paid 500 for mine which is about right for the OEM looking bonnet I wanted. Do love the vents.

Yea I have that too running a map sensor not mafs if that makes a difference?

Hi all hoping you can help? Ok ive got a large Greddy FMIC and ive been advised a few times that i should install a balance pipe between both throttle bodies to balance the air flow before the air enters the plenum? What size diameter balance tube would be best? Im thinking of locating the balance pipe between my hard pipes leading to the throttle bodies? The pipe joiners im thinking of using only go up to 25mm will that be enough? Im not sure if anything bigger than that could be intalled on these pipes anyway. What do you think ? Thanks Dan

Exactly what Smithy said you cant go wrong with the AEM im using 2 and mounted them in the stock dash.