Chrisbasildon

They look very similar to the hard race ones?

This is what I'm looking at now, are they bushed or jointed? can't quite see from the pic on the site.

I'm looking for any advice regarding the driftworks suspension camber arms, traction arms and hicas eliminator kit. what's the quality like? what sort of mileage have the rose joints lasted.

Turbo timer fitted?

Genuine stillen lockout bar, as new condition. £100 plus postage. Will post pic this evening.

I'm after a set of adjustable rear camber and track control arms, must be in serviceable condition. Thanks.

it's been to the dam and caught something. :lol:

Totally normal mate, as said turn nozzle to the side slightly and they fill up fine. some pumps are worse than others.

I would make sure you get everything u need prior to starting the job, overhaul your master cylinder, use a new Slave cylinder and a braided clutch line, get a new clutch, have your flywheel skimmed, check your prop bearings and Uj's or go one piece. Do all this before you start, then it's just a days work to swap over. and don't forget a spigot bush,flywheel bolts etc, these little things hold up a fairly simple job if you haven't got them ready. there's a conversion kit on eBay at present too

Uk transmission has oil cooler lines, jdm doesn't. Just have a nice loop pipe made at a hydraulics company, cheap and fits nice and neat.

Mine did this just once, after I turned ignition off the engine continued to run for around 6-8 secs and it seemed to shut down one cylinder at a time, never done it since, no alarm fitted at the time either. spooky these Zeds :biggrin:

Nice rims

All your wiring passes through the ribbon inside the cassette behind your steering wheel, u won't be able to add any wiring, you can of course just connect your horn wiring to the nitrous if you wish, but then u need to locate horn switch elsewhere so u may as well just locate the nitrous switch instead and leave the horn as is Get a kick down switch from an auto on the accelerator pedal and wire that to activate nitrous at full bore! :clap:

The loopholes in an mot is quite surprising if u only know them. :biggrin:

Definitely

Current mot regs regarding airbag are AIRBAG WARNING LAMP INDICATES A FAULT = FAIL AIRBAG WARNING LAMP DOES NOT ILLUMINATE = PASS WITH ADVISORY

I'm after the nissan part number for the weather seal along the outside of the left door where the glass drops inside the door. mine is just starting to show some silver and its bugging me. thanks. 1996 LWB would help

I've seen this twice now in Wickford, was parked at bottom of high street sat evening.

Glamour model? I have room in my tent :biggrin:

I really wanted this bumper as I already put it in wanted section, but after a heads up from a friend who the seller was I didn't bid out of principal. :thumbdown:

What was the exact term used to fail the servo?

It's momo millennium sport mate.

Who turned my pic sideways??

Fitted this, after some modification of a boss kit to make it fit correctly! Thanks to GIBSTER-TT for having numerous zed parts kicking around!

Your reading is so close to a pass im sure a few more revs would see it pass