neilz32tt

It's never worked since it's transplant.

This is a little complicated. My car is a combination of parts from 3 different vehicles. My shell is a 1990 import, everything else is off a n-plate 95 import, manual transmission, engine, wiring loom etc etc. My instrument cluster is from a UK spec 1990. Any ideas folks??????

Ok mate. I did have a reservoir from a later model which had electric hicas, I have a suspicion I may have binned it. Anyway back for mot retest tomorrow.

Thanks, I'll do exactly that.

Lol, thanks Jeff. I capped the two pipes to the rack by joining them together with a piece of power steering hose. I heated in boiling water and lubed and pushed it on by a good 2 inches on both connections. I have unplugged my hicas and now of course the light is on the dash. What's the answer, remove the bulb.?? Sent from my SM-N910F using Tapatalk

All done now. Unfortunately I cut one in half to fit, thinking that they must have supplied the wrong ones. Then lubed other side with fairly liquid and it fell in. So I will order a new bush for the other side. Your method of heating the housing on the hub worked an absolute treat. Thanks for all your help Jeff. Neil Sent from my SM-N910F using Tapatalk

Just those 2 bolts at the top are a bitch to get to. Sent from my SM-N910F using Tapatalk

I've sussed out the subframe fixings so that now makes sense. Just the bushes in the hub. Great quality kit but a fitting diagram would be handy. Sent from my SM-N910F using Tapatalk

Just fitting the driftworks kit and the bushes for the hub are not in 2 halves. Also the brackets mounting to subframe don't seem to be a snug fit. They seem a little sloppy. Sent from my SM-N910F using Tapatalk

Did you ever do a manual conversion?? Sent from my SM-N910F using Tapatalk

Thanks for that Jeff, that's what I wanted to hear. Really didn't fancy stripping down the hubs. The kit should be with me today, so will get on with it straight away. Thanks for your help. Neil Sent from my SM-N910F using Tapatalk

What's the best way to get that ball joint out Jeff?? I was thinking of making a jig to incorporate a 8 ton bottle jack to press out in situ to avoid removing hubs. I also thought about heating the housing with gas bottles, or with penetrating oil sprayed up and left over night, will it beat out with a large hammer?? Sent from my SM-N910F using Tapatalk

I've ordered the driftworks kit. Hopefully should be here in a couple of days. I would like to of got it fitted before Saturday to re-mot. Alarm bells are ringing now you've mentioned modifying hubs Sent from my SM-N910F using Tapatalk

It sounds good to me mate. If Jeff recommends it and you have one and are happy with it, then that's all the convincing I need. Sent from my SM-N910F using Tapatalk

Thanks Jeff, good advice very much appreciated. I will do exactly that. Sent from my SM-N910F using Tapatalk

Just finished doing a shell swap and took for first mot. Failed on excessive play on rear steering rack. Mechanic said when on two poster, you could move both wheels from side to side. I could feel something wrong when driving there. I put the hicas unit on from another vehicle I had. But the main engine loom and engine are from a later 95 model which had the electric rear wheel rack, this could be the problem hey!! Sent from my SM-N910F using Tapatalk

Do you by any chance have conzul?? Sent from my SM-N910F using Tapatalk

Anybody no of a simple way to bleed rear wheel steer rack??? Sent from my SM-N910F using Tapatalk

Thanks for that, that's what I thought. Where can I get the right one and how much?? Sent from my SM-N910F using Tapatalk

I need to bleed my hicas. I have read a thread about getting under the car on stands and getting somebody in the car to turn the wheel from left to right with it in gear at 2000rpm plus. I would prefer to use conzult. Could anyone please tell me what one I need to buy. I see several on ebay but not sure if the cd is just the driver and not actually the conzult software???? Sent from my SM-N910F using Tapatalk

Can anybody help?? . I have a emanage blue in my zed which I want to set up. Does any body have any advice or a software cd???

Okay, thanks. I will give him a call.

Could anybody advise me on what clips and where to purchase for z32 scuttle pan, kind regards Neil

Ok gents, I will take a picture of it later

Thanks Steve that diagram solves the problem. I also have a boost sensor by the maf. It is part of the main loom with its connector right next to the maf connector?