JaiKai

only think i can see is the link never had the www part which i've now fixed.

The user has been dealt with accordingly !

Looks like steams was the thread closer this time : [TABLE=class: tborder, align: left] [TR] [TD=class: alt2, align: left][/TD] [TD=class: alt2, align: left]Steams[/TD] [TD=class: alt2, align: left]18:47, 22nd Jun 2012[/TD] [TD=class: alt2, align: left]Closed Thread[/TD] [/TR] [/TABLE]

I was so disapointed there

Sky Net takes control!!!

if ecu pin 44 isn't ground the timing will be wrong also you need to short / bypass the starter relay which is under the drivers side wheel arch

just take the bulb out if it annoys you.

Paisley Freight !!

Many of you know or don't I maintain IT wise a fairly large call centre in my home town as my main job. our technology is fairly top spec and all our calls actually come in from a high speed internet leased line. These calls use a technology called sip and depend on the high speed line to work ! So today my bad luck started and I made a huge fook up that caused major downtime of the full centre. It all started when my assistant and I were trying to cable pull some standard catv network cable through a floor space that wasn't bairly 1ft high. when trying to find out how to pull the cables we discovered that our main leased line had an extra 20 or so metres bundles at one side so plan set in action we decided it would be a great idea to partially pull that cable backwards and tie a guide rope on and pull it back. All was going well until we heard the worst sound you could possible get from a busy call centre. Nothing but silence !!! Then suddenly major complaints from everybody saying there call and internet just got cut off. In a major panic I ran back to the patch panel to find that the fibre cable which we were pulling on was no longer attached to the wall and was swiftly dangling in the wind. I quickly informed the floor manager whom suggested "ok, we can use the backup line which is a cable modem" at which point my face dropped as I remembered that was one of the cables we also just pulled completely out of the ducting and was now no longer usable. Well after a mass panic attack and pure luck we pulled the original cable back through and the damaged fibre line and after 20 minutes of configuring we were up and running with the backup system. Now the cable we snapped we couldn't personally fix so an engineer from our isp had to get called out at cost. Lesson to be learned is that if you see a cable and think it can be used as a pull cord : think again. I seriously felt 90% fired when it happened but all is well now and hopefully I wont be so idiotic in the future. what a rough day I've had; now on my way home for a late dinner and a few bears.:yes:

Cant think of another reason to lay a woman down on a pool table:tongue_smilie:

You must believe me folks I have tried with assistance from my brother with gear pulling tools and blow torches and we must of spent the good part of two separate weekends trying to get the damn things out but they just will not budge even a few millimetres. So if anyone knows of a guide to get the full knuckle off that would be great. Ive got as far as disc off / calliper off then hub bolt off.

Hi Jeff, Problem is that the ball joint wont come out, I've tried cutting the end off; grinding it and then a bash with a blow torch. It simply will not budge; so the plan was to take the knuckle off and get the joints pressed out.

Any one know how ? (with pics if possible)

Congratulations to Bruce for getting his first 4 page thread !!:thumbup1:

Thats a great idea, i'll look into it

I will put together a club instruction manual on this as I think its a great community tool to use but there's still confusion on how exactly it works.

You posted didn't you so that will bump it up.

Woo you now have two bars !

Must be as your profile says you have 91!

Yip !!

Feel the power of rep !

Youll see your rep figure in the user panel! The figure on the left is rep power and is what you can give.

You've more rep power as you have double the post count of me !!

Ok Rep Power on the left is how much rep you give to someone else, This increases when people rep you or you make more posts or various other things. The rep bars go up by every 100 rep points you have!

I've now enabled your rep figure on the left so you know what's needed to get to the next level ! EDIT Witch actually doesn't make sense lol, as my reps lower than steams yet I've more bars!