JaiKai

Old Tailgate which is japspec glass : [ATTACH=CONFIG]81344[/ATTACH] Tailgate of breaker which I presume is UK : [ATTACH=CONFIG]81345[/ATTACH] Now we haven't removed the quarter glass and I never intended to due to the difficulty of it. So would it be possible to tint the clearer glass down to the same as the quarters. Also the front is cracked and is getting replaced under insurance so no idea what that will be either. [ATTACH=CONFIG]81346[/ATTACH]

Actually got the original tailgate from the black zed but threes slight burn marks on it from when some welding got done and the glass wasn't sufficiently covered.

Actually got the original tailgate from the black zed but threes slight burn marks on it from when some welding got done and the glass wasn't sufficiently covered.

Its not the tint but there's the remainder of a very clear film that I can't easily get off. The glass that's out the back on my spare blue looking and I could tint that.

Its not the tint but there's the remainder of a very clear film that I can't easily get off. The glass that's out the back on my spare blue looking and I could tint that.

So I've two more tailgates out the back and now I know how to get the glass out i'm thinking of taking one of the better glasses out the other tailgate. I see a kit similar to what I used in the garage on ebay but is £25 cheap or should I get a better one.

So I've two more tailgates out the back and now I know how to get the glass out i'm thinking of taking one of the better glasses out the other tailgate. I see a kit similar to what I used in the garage on ebay but is £25 cheap or should I get a better one.

lol, I'm at JAE every year and was at Coventry last weekend. The drives not as bad as it seams and could be more fun if a convoy was created.

lol, I'm at JAE every year and was at Coventry last weekend. The drives not as bad as it seams and could be more fun if a convoy was created.

Progress has been slow but finally getting some more jobs done. Took the best bit of two hours to get the rear glass out as the tool / wire we were using kept snapping. Eventually discovered that we missed two clips that were in the corners : But with the glass finally out the work can be started to prep the tailgate. Also at the same time another guy was doing my doors and was in the process of adding the lower filler panel. And after the glass was out I test fitted my new rear japspec bumper and also cleaned all the old goo from the light areas. Looking a bit bare here but at least the progress is moving now.

Progress has been slow but finally getting some more jobs done. Took the best bit of two hours to get the rear glass out as the tool / wire we were using kept snapping. Eventually discovered that we missed two clips that were in the corners : [ATTACH=CONFIG]81339[/ATTACH] But with the glass finally out the work can be started to prep the tailgate. [ATTACH=CONFIG]81340[/ATTACH] Also at the same time another guy was doing my doors and was in the process of adding the lower filler panel. [ATTACH=CONFIG]81341[/ATTACH] And after the glass was out I test fitted my new rear japspec bumper and also cleaned all the old goo from the light areas. [ATTACH=CONFIG]81342[/ATTACH] Looking a bit bare here but at least the progress is moving now. [ATTACH=CONFIG]81343[/ATTACH]

i'm in, lol my zed will be easily ready for then !

i'm in, lol my zed will be easily ready for then !

There was loads of cake and we only used 1/2 of it. Great to meet you all and put faces to the weird forum names. :)

Great tip that I'll do as mine are out at the moment. But I must say they look spotless. :)

What happened? Should have called me and I would have came back.

We had an excellent tropical thunder storm at the end too!