vodkashots

i suppose the easiest way is getting one of them pay as you go credit cards. though never really felt the need to have one just for paypal, but its looking like its not such a bad idea lol

i dont use a credit card matey, seen the amount of crap my dad got into with one. never had one in my life lol

not from my santander account its not matey, put some funds in last tuesday, and its saying its not going to be ready till 3rd of may :(

With the crystal what we noticed at JAE, was that the indecator lit up just the square and not the whole bar, break lights worked the same

when it takes the 10 from the bank does it have to wait for it to clear? or is it instant? still cant work out why paypal takes so bloody long to get funds in it.

Right, i have funds in my paypal, and i have funds in my bank. Now if i wanted to purchase something from ebay but had the funds split between my bank account and paypal can i still purchase it and how does it work? always wondered this as cant see people waiting 5 to 7 days for funds to clear into paypal if the listing ends before the funds are in.

None cat CO% Max limit is 3,500 None cat HC PPM Vol max limit is 1200 You would fail on the CO still.

1. break lines are not that difficult to replace 2. not sure haven't had to change one 3. he has tested your vehicle as a 350z so the readings are wrong as the 350z is more economical, not to mention the completely different engine. considering the age vs that of a 300zx. also what year is it? as this would also effect the reading as it can be tested as a non cat car if its 1992 and below

and how many times are you going to have to clean the deposits off the len's lol

It's relisted on the bay for a buy it now of 2.5k

oldest trick in the book mate to get a better price lol

If cash is no object try and do the following Easy really, EGR delete, AVI delete, carbon canister delete, Renew as must as possible. Turbo referb is always a good one Renew all fuel lines Front and rear crank seal New water pump New timing belt and idler pulleys New det sensor New engine wiring harness if yours isn't very good (you will find out when removing the engine) Oil change Oil filter change New engine mounts plenum by pass If its a manual gear box. May as well replace the thrust bearing and fork Cheap things to do while the engine is out. Clean the engine bay, you will be surprised how groggy it can get down the sides. Clean the radiator If cash was no object, that's what id be doing.

you haven't put a clause in the tenancy stating that it must be their Permanent residence? they are not paying rent and are not in the premises, I'm pretty sure you have the right to go and change the locks mate depending how long its been since they last resided at the address. If it was me, i would of worried about the consequences after to be perfectly honest, they have given up any rights they may of had with a tenancy by moving out. they have already stated they are not living there. that should terminate the tenancy automatically on there part, other wise there will be people up and down the country who still live in properties they have moved out of with out letting the landlords know.

am i blind? i dont see a reference to sony there?

mate id love to have your black one, absolutely stunning car, and still cant believe it hasn't been sold. also same wheel as me, cept mine isnt momo.

True, i would manual a auto i liked if i got the new one before i got rid of my current one. whats annoying though, is there isnt any rust on the body work of mine cept down near the drivers side sill that i put me bloody finger through just before the MOT. its just panel damage. i need a new valance panel on the rear passenger side so the bumper fits properly. i also need to get the dent sorted out properly as its put a stress crease near the fuel tank flap. AArrggh, really not sure what to do, as the rest of the car is good. the inside is spotless part from a dodgy condition leather on the drivers seat.

i looked at that too, but gear box problem, was up a few weeks back for £4999.

will always need to do something to them, mine is mechanically sound, well apart from needing a new clutch as its slipping in the higher boost range. but other than that. the body work with the dents is making me not sure what i want to do. I need to replace both wings, mainly due to one now missing both the studs the front bumper does up with, and im not sure, but think the other one is at fault as to why my front bumper doesnt fit. need to replace the drivers door as its got a horrible dent in it. the rear tail gate needs sorting out as i cant see out of the back window, the rear quarter is damaged, that's going to cost a bit to repair, its in need of a full respray, i still have to get the rear and front bumpers to fit properly (still cant work out why the 99spec front bumper wont go on my jap spec car, yet fits my breaker perfectly and yes its a genuine) i need to replace the exhaust still (will get hold of you next month for that one bud) the wheels are in need of a refurb, and i need to replace 4 tyres, and rear tail lights. By the time I've finished doing all that. I'm going to be looking at around £2500 spent. for that type of cash i can get one with a decent body, replace all the crappy things off a new one with the best parts off mine. and then sell or break mine. So really not sure what to do now. the body work has been bugging me for ages, as i get the piss taken out of me on here for it and its starting to get to me. If i could weld, id just cut the part off my breaker that i need to repair the rear quarter and do it my self, then it would just be fitting the front bumper properly and getting it resprayed. dont really have to worry about a replacement drivers door as id use the one off my breaker as its in good condition, and change it over before it went for a respray.

Yes it did, you bloody show off :tt2:

i got a manual so that's not a problem, problem ive got, is all the repair work on mine. not sure if its worth repairing or putting the cash that i could use to repair into a new one that doesn't need body work done. It wouldnt be too much of a problem if i knew how to weld, but i dont. unless i get a mig welder and use my breaker to learn on.

http://cgi.ebay.co.uk/1990-NISSAN-300ZX-3-0L-TWIN-TURBO-AUTO-Z32-FAIRLADY-/150591960965?pt=Automobiles_UK&hash=item230ffaf785 JeffTT it has a zedworld sticker on the chrome slam panel, does it have a history at yours?

looks bigger on my screen, must put my PC back on the monitor rather than using this plasma :lol:

so the burning question is, what spray gun that cost just £40 for this, also any hinters on what type of air compressor to use if your doing this out side a booth?

the little thumb nail, not your willy :lol:

i was looking for porn and came across that, looked like porn to me :D glad it helped bud. if you click the picture it comes up bigger for more pleasure lol