TonyB

In daylight, Disconnect the power supply to the HIDS and see if that makes a difference, just in case there is either something wrong with ballasts, or the wiring or something has been disturbed in fitting them. That way you know whether it's the alternator or something else Good luck in finding it !

They'll be going that way when there is a nationally implemented ANPR system in action..... with car zappers on every camera !

Well you could just put bigger turbos and injectors and go for the 300 mph ! Or, a proper speedo conversion using 180 max on the dial and a KPH > MPH chip What I would do is give Zedworld a buzz and ask Jeff or Jamie your best course of action because they will countless speedo consoles coming out of wreckers and probably do you a swap or at least you could get the right chip from them... Don't know which series of zed you have but there are differences in series as to how the conversion chip is connected

If they are all held on computer (I know they have been for years) why can't the general public access them to find out if a car they are thinking of buying has a current MOT and now, what advisories there were at the last MOT ? Given the complexity of a ZX TT having the advisories on the MOT could prove very useful !

First off is a UK or JDM model ? I've only experience with JDM one but the indicators I've had have a mix of bulb holder size, especially for the little corner light. On JDM originals they seem to use a fairly large bulb holder but on the replacements they have a smaller hole, like the bulb holder in the carrots, so may need to switch that part of the loom. It is just plug and play if you have the alternate wiring

And Jeff's come balanced I believe

Looks like the rear suspension is broken......

Kids came knocking on our door, Jan answered..... They said 'trick or treat' ? Jan said what happens if I say trick ? One bright one lad said 'oh no, what you gonna do' ? Jan replied that they were supposed to trick and they just looked blank ! Still she sent them off with some Cadbury miniatures Unbelivable !

Is it an import..... If so it could be a problem with the converter for kph to mph.... and many take until about 20mph to fire up and read the speed !

No you need the black box HT units installed as well.....

No you need the black box HT units installed as well.....

Souldn't the terminals be at the back on a zed battery ?

Or the MAF failing

Hi Rob I was at Zedworld yesterday and I asked Jeff about a black front wing He's got one ! Give them a ring !

I remember that one as well !

Watch this guy ! http://http://uk.autoblog.com/2011/10/10/video-idiot-cleans-mercedes-cls-interior-with-a-jet-wash/?icid=maing-grid7%7Cuk-ws-bb%7Cdl7%7Csec1_lnk2%7C81734

Big thanks to Jeff and Jamie for sorting the water leak on my zed. Took a while. It was the four or five inch heater matrix hose that had a leak caused by an overtightened jubilee clip cutting into it. Who the eff put that on ? Then JAn's zed was in for an MOT Jamie said oooh pads llok a bit low. Spot on Jamie, flew through and he won a fitting for new pads all round. Thank you Zedworld

Hi Rob Jeff should have a good supply of wing panels and If your luck changes he should have one in black They just bolt on so it's not that bad to change Bummer though when it happens

What about any differences between UK and JDM ? And What about commonality between senders like Water temp, Oil pressure, Knock sensors etc ?

Put a dummy camera with an alarm on it lower down so you know if anyone is messing and keep a baseball bat by the front door.....

Funky Si knows where to get them if you can contact him

or 312 taking 300 plus the Z as a 2 and the X as a Roman 10 !

Bonnets not on straight, probably crash damaged ?

300....... bit obvious if I'm right !

was a plod car in the background ? Wouldn't stand a chance against any of those !