General Discussions - 300ZX Related

I have Non Turbo MPH Speedo Clusters available also!! These are not sticky faces or have a MPG sticker over the KPH! These are genuine Nissan MPH Speedos and will go straight into your Jap Non turbo car and give a MPYH Read out! Should also elimanate your 110 speed restrictions! See pic!!http://www.300zx.co.uk/rides/mr_300_twin_turbo/speedo_cluster.jpg

Where and when is thai brum meet? And how many cars/people are going? And can i come?

I have quite a few speedo UK Speedo clusters and Leather interiors and cloth Interiors available!!

http://www.pc001a7018.pwp.blueyonder.co.uk/video.html pic number 4 ------------------

I've got a 350/360BHP 300ZX that I'm going to revert back to the standard 280 BHP setup. So I've got the following bits for sale. JWT ECU Boost jets HKS exhaust system Brand new (in box) Blitz springs. I have invoices for all the above bits. Youre welcome to see how it improves the performance (on my car) before you buy. They're on a 1991 H reg TT auto (import). If you have a "good" condition standard exhaust, then you can use it in part exchange for my HKS exhaust. I will be after a good price for all these bits as I'm in no hurry to take them all off my car (as you can well imagine :-) ). Feel free to call me on 01634 221783 to discuss pri…

I've got a 350/360BHP 300ZX that I'm going to revert back to the standard 280 BHP setup. So I've got the following bits for sale. JWT ECU Boost jets HKS exhaust system Brand new (in box) Blitz springs. I have invoices for all the above bits. Youre welcome to see how it improves the performance (on my car) before you buy. They're on a 1991 H reg TT auto (import). If you have a "good" condition standard exhaust, then you can use it in part exchange for my HKS exhaust. I will be after a good price for all these bits as I'm in no hurry to take them all off my car (as you can well imagine :-) ). Feel free to call me on 01634 221783 to discuss pri…

when my car is cold the revs seem to go up and down a lot when warm it appears to be ok is this something to worry about if so is it easy to cure any advice would be much appreciated mark

wheel hub i can borrow for 4 weeks. so i dont have to dismantel me z and take it off the road as the meets are coming thick and fast. while i have adaptors made for me calipers....(big brake conversion).

How the hell are you supposed to get the front discs off? Have tried just about everything, going to try again tomorrow. Striped the treads out of the tapped helper pry holes too If it comes to it I'm going to take the hubs of with the discs attached and tap the hub through, I'd rather not do this, so does anyone have any suggestions? Not only this one side is majorly complicated by the fact that one of the caliper bolts has snapped, it's rusted into the upright are will NOT budge. Pi55ed off again. Cheers, Jezz.

Drool

Looking for a turbo timer for my car it is a 92 import

Need a dump valve on a 92 import

My supposed stainless steel ones have rusted through. Anyone got a good set of them for sale, prefer nearly new or new

Want to upgrade my brakes as I find the stock ones on the imports a bit crap. Been told you can get skyline ones which are infinitely better and bolt them staight on. Does anyone have any at all

ok then. i'm gonna need a decent EGT Guage to put in the hole of the exhaust manifold on a GTO [maybe] - i think the previous dipstick removed his meter and left a hole. I think Blitz do one for about £90. anyone got any experiences with EGT Guages.Graham Goode in Leicester said they would sell me a HKS one for £280 plus VAT. damn HKS. Ben. [This message has been edited by Veilside (edited 15-03-2002).]

Sorry to do this guyz. Andy, Sent you a mail m8 Any time on Sunday? Give me a bell and let me know 07775 711 670 Ta Tim

do any of you guys have this hallowed piece of equipment and if so whats the chances of you having a look at my motor for me....im sick of people telling me it looks like its running rich and i could do with knowing for defo

Just got my car back yesterday after changing the water pump, corr the bearings went on it big style, destroying the drive belt big stylee!!! Anyway peeps who is up for Bolney tomorrow, 200 jap cars will be there. I've got a spare seat for a passenger, u up for it tomorrow Warren?

Does anyone know if these are available for the Zed?. Iv'e seen the z-centres white dial kit and am not too happy with it to be honest. Not the dials itself, but the way the light shines through - a bit poorly i think. Indiglo's would be perfect if available...........

Have just broken a black jap spec tt and have loads of parts still available for anyone whos interested. Please give me a call on 07961 543 786 to check availability on parts and prices. Everything shelved and ready to go - no hassle, no waiting around. Regards, Kash

After 3 weeks of the road waiting for a new engine to be fitted, the car is ready and waiting to go. It's being delivered back to me on Sunday evening, so if you see a blue Z going really fast around derbyshire, That will be me. All I have to do now is pay the £3000 Bill Regards JOHN

Chaps, Got the headlight out and am going to split the lens and here is my prob... Cannot find the 'Chrome, metallic film' that is recommended for the inside of the lights - is this necassary and where can I get it.. and what is it used for when I am asking the shopkeepers for it? ) Thanks in advance chaps , Glen

HELP. I need someone who can solder, and preferably who has done it before, to do the import bulb mod for me. I want to replace the crap jspec dip beam bulbs that are in my 300 with somethign more powerful. A couple of candles would be brighter I think. I dont have a soldering thingy, have never done any soldering and really don't think it is a good idea for me to try. Please can someone email me on jvnewcomb1961@yahoo.co.uk with a price to supply two modified and higher power bulbs to fit it. Thanks JN

Ok will courtesy-nissan clutch assembly/pressure plate/release bearing for non-turbo fit into a Jap import 92 here in the UK??? Anyone seen any better than Nissan cltch kits for NA 300's??? Any other bits recommended to change when replacing clutches? Cheerz Rob ------------------ [This message has been edited by The Claw (edited 15-03-2002).]