General Discussions - 300ZX Related

Seats...and how difficult was/is it?,i am thinking of getting a set from luke! Also retrimming the doorcards etc etc? Dave

I`am Looking For Some Red Stuff Pads For My Car ,becouse My Car Was Made In 1990 No One Is Sure Which Pads Thay Are Supposed To Be, It`s A Fairlady 1990 Non Turbo Z32, I Think I`ve Got The Right Ref Number For The Brakes Which Is (31200) But If Any One Could Help Me Out Or Knows Any Different Before I Order Them. Cheers Ray

Hi All I have a 90TT import which is suffering with extreme hesitation/spluttering when hot. Car runs fine when cold, but as soon as the temp reaches normal running condition it will completely loose power on all cylinders, then violently kick back in, it will drive for a while until the condition worsens and cuts out. Once cooled down she is fine again. Have read through some other threads and problem seem to indicate towards PTU. However I changed it for a know good one today and no improvement. Also noticed that she has been smelling of fuel when cold recently but could not find a leak Any other ideas would be much appreciated. Cheers Andy

Is there a difference? - Has someone done a conversion table? Is this on the FAQ? Is 1 bar enough? :)

can somebody help? been using the z for about 10 days now after 8 months on a drive. just driven home, approx 10 mile and was sitting at the lights 1 mile from home when the temp guage started rising and oil pressure dropped slightly. thought id make it home, but got back and temp was sky high. started making rattling noises like a diesel. popped bonnet and somethins been burning - all the water had gone from rad. pleeeeeeease tell me its not a gasket or somethin? aaaarh!

I have a 1993 300zx tt (2 seats) Shortwheel base. Im after a rear bumper for it. I have been told that the bumpers are a different fit for the one i have and the 2+2. Anyone know if this is true or will any 300 rear bumper fit? Thanks

...cruising along Wilmslow Road about 8.30pm

Just saw you zip in front of me across the roundabout along Coldhams lane heading in the direction of Newmarket Road as I was on my bike coming out of the Beehive Centre going towards Homebase.

I was driving along and all of a sudden the speedo needle dropped to zero and the steering got stiff and stayed like it for a while then the HICAS warning light came on. Has anyone else had anything like this. And what does HICAS mean. Cheers :confused:

My mate has an old Merc (a 190, about 1990, 2 Litre auto) The autobox stopped working today - it won't go above second gear. It was fine before and works ok now but only in 1st and 2nd gears - any ideas what it might be? Cheers lads!

HI Has anyone fitted a C2 front bumper? can you tell me what indicator units you used. All information gratfully received Thanks Markz

Well even if I haven't found out why. I now know whats stopping my car from going. The injector in No 2 and No 3 cylinders are jammed wide open even with no power to them at all. They pump about a cup full of juice into the cylinders evey 3 turns. The other for injectors are functioning normally. Anyone know what the fook is going on and why. I've been very lucky so far and not bent anything.

Howdy folks, Just wondering how much you guys think a full respray would cost (with a colour change from stock silver to a deep metallic grey). Bodywork and panels are all good no dings or dents that would need work....also wondering about the chromework (that's painted black on mine) around the window and around the targa top panels - can this be re-chromed? And does anyone know how much to pay for a good pro job on the paint job and the metalwork? Any experiences with good/bad paint shops? Recommendations? Cheers :)

Has anyone got a picture or can point me in the right direction of how to pressurise the intake system. I have got a leak somewhere I think which is giving me an irratict tick over & stalling problem. I'v heard there is an easy way of checking this. Any advice would be greatfully received ;)

http://www.dealer.autotrader.co.uk/_otter.htm The red 6,995 90G TT. It's a good deal older than I wanted to go, and it's also crap load of £££. However, it's one of the only TTs locally - looks like it's had a fortune spent on it. I'm told, and seems to be backed up from what I've read here to avoid early ones if possible, is this too old do you reckon?

what wires in the lights binacle can i tap my gauges in to? right i know how to pipe in the boost gauge an water temp gauge but how do i pipe in oil pressure gauge? have got 1 of them sandwich thingys fitted from chris getgreddy. what pipinghas to be used as the 1 supplied will prob melt? cheers :confused:

I got a Greddy Profec E01, and got some problems I don`t got stabile boost from about 5000rpm(power/hp goes "up and down", like rollercoaster after 5000rpm), I have tried with many settings at my BC witout any luck. I got about 400hp to 417hp(at wheels) with 1,2Bar to 1,4Bar with these settings(these is are the best I got): Set:66% (about 1,4Bar) Gain:20-25% (about 1Bar på 3700-3800rpm) Startboost:1,2Bar BUT when I clamp the house that goes to Wastegate`s I got about 460hp(at wheels) at 5000rpm(boost came much faster when I clamp WG hose). Here when I clamped(my settings at Profec wont work then) the hose to WG`s(I dident dare to go over 1,4-1,5Bar and…

As above... even though it was red i still think it looked excellent :x:

The 300 for sale here: http://www.alconburytradecentre.co.uk/_alconbury.htm It's one of several on the Autotrader that doesn't state it's flavour. Is there an easy visual/spec clue, or is it safe to assume it's an N/A? Ta.

Can anyone help with advice ?? i have a uk 300tt with standard exhaust system & noticed i have a slight blow on drivers side underneath on inspecting the exhaust i found a piece of tubing coming of the downpipe on the drivers side which appears to be the problem as it is slowly falling apart does anyone know what this is?? it appears to be an air pipe??? any help & where can i get areplacement pipe??? cheers fellow zedders

Anybody In The Essex Area Got A Spare Ptu They Want To Flog. Took Mine Off Today And Lots Of Water Was Seeping Out Of It. I Reckon This Is Why The Damn Things Been Running Like A Bag Of Spanners. Does Anyone Know If They Can Be Taken Apart And Cleaned?

Anyone know if the ignition switches are different man.-auto. My car is jap auto and the switch has wires fixed to it. Found a replacement but it has no wires at all. I think the wires are for the park locking mechanism but dont know. Thanks Chris..

Hi All, Does anybody know where you can source First Super-Weapon wheels from? Took my Z back to the dealer the other day and one of the front wheels has a crack all the way through one of the spokes. Fortunately it's a warranty job. Thought it might be possible to weld it but he's spoken to various people and it doesn't seem like it's such a good idea because it could go again at high speed. I'm pretty gutted because I really like the wheels on it (a really nice set of split rims)... actually it was one of the main reasons I got the car. He's suggesting fitting either a completely new set of alloys (won't be the same though) that are the same size be…

hi ,, i got grey blue ish smoke coming out of right bank ,exhaust ,, when car is idleing, and its at operating temp,,ie warmed up fully, also smelling burning oil under bonnet from same side off car,, no oil leaks , ,well none that are dripping onto pavement,, only other thing to add was ryan suspected rear turbo oil seal, when i met him 6 weeks ago at a meet as on the way there car let off big ploom of white smoke on way to meet only did this when came off throttle, but its not done it scince, which is blooming wierd, ,, hopefully going to see ryan very soon, to get more info , just wonderd if any of you guys had some tips, or ideas ??

bought a set a while ago on ebay, only just got round to trying and fitting em. Well i got as far as getting em out the packet before i realised that they dont match the dials in the car!!! My speedo goes to 180mph, these go to 160. any ideas what they are meant for? jap spec? n/a?