General Discussions - 300ZX Related

Just drilled through a fuel pipe!! if you remove the piller covers on a SWB there is a crossmember on the passenger side. I have just put a 4mm hole through this into hopfully what I think is the fuel vent pipe! not the fill pipe. can someone confirm this is so. Many thanks Allan

But must be 35mm min - 40mm max. A kind of plastic/rubbery one would be ideal - but any idea's? Thanks :bow: would be a touch if I could find one.

:x: Checked the plugs today, first time in the year that i've owned the car :wack: , found Denso PK20RR11. Should i replace with the same or go for the NGK PFR6B-11B. Cheers

Thanks to ryan, greg and co. for their grand hospitalities and the excellent help and advice given at the 'car care clinic' on saturday. May the queue for crank shaft oil seal replacement begin! Joel

think it is higas, dam i only been away from car for two mins lol, next to "lights" warning light on dash board to left of speedo, higas, what does it mean/ what should i do, car has been stood for ages if that anything to do with it. thanks

HI, saw you put thumb up to me, and flash me, caught slightly unawares not used to seeing another Zed in the town. Cheers Dave

Hi, I dont use my Zed daily anymore, maybe 3 or 4 times a week - and recently when it's been really cold - it has been VERY LUMPY when starting from cold - after 2-4 mins all is well - but very cold starts require throttle control to keep her alive - until she settles!!! (hormonal car?????) Any ideas. She has always been a fab cold starter! Has already had (within 5K) New Plugs/new MAF/PTUv2/both temp sensors. Thanx in advance. AndyGP andy@cheeandy.com 0774 616 6608

Does anyone know a good mechanic in the Sussex area that can look after my Z, I am fed up taking it miles everytime something goes wrong. I have it appears injector rubber failure, (3rd) time in three 6 months. I need someone that knows Zeds. Thanks. :(

can any one help??? my manual TT is running at 2000rpm, ive cleaned the IAA and regulator valves, TB's and replaced all pipes around the IAA, the TBS is set to .045v and all connectors have been cleaned i.e water temp, AAC and FICD and the regulator connector, but it still runs high. that is untill i disconnect the AAC valve connector, then it drops. please is there any one out there that can help???

Does anyone know of a picture of inside the door, with door card removed that shows close up of the door lock barrel and how its connected to the rods. Trying to fix door lock on Wife's NA, its never worked since had car, and there is a cobra alarm installed. Have taken door card off and none of the metal rods are going to the lock barrel and cant see anything that should obviously be attatched. Looks like the Cobra alarm installer has redesigned the mechanism to work with the alarm. Really dont want to have to remove my door card to compare

is it possible to make these fit?? with brackets ir are they too much in price and overkill?? http://cgi.ebay.co.uk/Porsche-Lamborghini-BREMBO-8-Pot-Brake-Calipers_W0QQitemZ4615590491 fitted with these brackets?? http://cgi.ebay.co.uk/MBT-Universal-Carrier-for-Porsche-and-Brembo-Calipers_W0QQitemZ4616206871

Any ideas how anyone? Do they just prise off or do you have to unbolt the 12?mm nut? Cheers

Spotted going under the M11 motorway towards North Weald appx lunchtime Sat 25th Feb. Sounded real sweet :)

i need a twin turbo wing but not a original because mine is rotten. and it needs to fit good any body got any ideas? thx Steve

Has anyone got a digital boost gauge they'd like to sell? Also, an automatic turbo timer!

hi taken old orignal radio out and replaced with a modern one. trouble is electric ariel aint going up no more. used orignal wiring from old loom which was 3 wires. ignition, live and negative. didnt need speaker wires because running them through amp. ive plugged the ariel lead in but can anyone help me out with the wiring. what colours or colour wire from loom connects to my radio one which is blue. ive got the ariel up at the moment ive powered it from the amp. hope someone can help this is baffling me. many thanks gary

When My Motor Hits 120mph(ish) The Power Dies Completely, Does This Mean Its Still Restricted? Could The Hicas Light Cause This Problem As A Safety Thing?

hi all just got some veilside split rims and i want to give them a clean up as someone has painted them. is it a good idea to split them or is it best to leave them alone. has anyone done this before???? cheers kev

saw you yuo didnt see me LOL. Driven by a guy in his fiftys i saw you in kinson shell garage. gaz

the other night at new beckenham station. coper cope road side of the station

monks orchard road eden park

Sounds great doesn't it?? :rolleyes: http://cgi.ebay.co.uk/Nissan-300zx-FULL-body-kit-spoiler-300-zx-bodykit_W0QQitemZ8041770088QQcategoryZ72207QQrdZ1QQcmdZViewItem

red z at nissan in washington, think it had an irish number plate on.

is there any difference between a TT and an n/a steering boss?

I have a Jspec TT, the OEM boost gauge is measured in mmHg, could someone tell me what 7mmHg is in bar or psi please? Scotty