General Discussions - 300ZX Related

Hey guys, looking for one or a pair of steering rack gaitors as the NSF is split in two :S Also does anyone have a set of callipers or caliper seals? Rich :confused:

one in st werburg's bristol ( not spelt right i no) K *** ABL gun metal grey in floorin suppy shop. an a dark zed black mabey dark grey in claverham irish plate ending in FUB

il get me lump back in saturday! i would be doing it at the garage but theres 15 zeds there at the mo PMSL so home rebuild!, only good thing is i can take aslong as i want few pics anyhow, fingers crossed for a dry weekend :smash: cheerZ

While Trying To Take My Wheel Off The Zed Yesterday I Snapped The Locking Wheel Nut Tool Only After I Have Undone 4 Now I Cant Get Them Back On There Are No Markings On The Tool Teh Alloys Are Bk Racing And They Have Just Two Sets Of Letters On The Wheel Via And Tic Does Anyone Have Any Suggestions On What I Can Do I Have Tried Wheel Places But Prob Ive Had Is That The Holes Are So Narrow And No One Seems To Have A Socket That Will Fit Into The Holes????????

My engine is out of the car at the moment, changing injecters and turbos. Question: Best (and money wise) way of curing noisy lifter/s ? I wondered about just removing/cleaning ? or bite the bullet and buy all new ? Any help advice appreciated.

Just recieved my relay from cpc, but it doesnt have any bloody laybles that i can see! Has no numbers on the bottom at all or anything that makes the pins job obvious. I need some help please as to which is the trigger and which the load? The relay is a NAIS ALE15B05 The left hand side says 16A277VAC & 16A 30VDC Right hand side says 16A250V~COS0=1 & 16A 30V 0ms Im guessing the left is the trigger? and right the load? Cheers guys

Well guys and gals the time has come to sell up as im looking at getting a house :slap: i really hope i get what i want for her because ive heard so many storys of bad zeds and this one has been no bother whatsoever apart from clogged pcv valves and leaky power steering pipes which have been sorted. this car has been the most exciting fun car to drive ever and ive driven a few so called nice cars!!! once i have a house and ive been settled in a bit i will defo DEFFO be getting another one!!!! i dont care what other cars there are out there!!! ill be still on here tho and if i dont get what i want for it ill just keep. :p so its not goodbye yet just…

My alternator doesn't start charging the car until the revs hit around the 2g mark. I can start the car and it will idle fine (unless the battery is flat) but when you measure the battery voltage, it sits around 12 volts. Raise the engine revs to around 2000 and then the alternator kicks into life and starts charging normally (around 14 to 14.4 volts). Does this happen to everyone or am I lucky enough to have to swap out my alternator ?

Can someone please tell me approx how much leather I will need to replace all the sh!tty tweed panels i.e. door cards, rear seat panels, glove box, center console etc. but not the seats CheerZ in advance

Booked an mot yesterday for 8am and ended up working on car till 4 30 in morning, and it failed PMSL did I really think it would pass? Nearside rear track rod end ball joint excessive play Offside rear track rod end ball joint excessive play I even took the time to remove the warning hicas light from the dash :nono: Can't be why my hicas light is on though, lol Horn does not function (I never checked this will look tonight to see if it was sprayed orange when car resprayed) Side lights not working, was working on this and auto leccy spent 2 hours trying to solve problem yesterday, but I had to do all the re-routing and shuff last night. The ele…

i have a jap tt auto and my cruise control has decided to stop working :smash: when i press the on and off button there is no green light and a clicking noise coming from the glove box :slap: i sprayed WD40 in the ASCD cancel relay to see if that helps but it didn't has anyone any ideas for me? or is it somthing for z world to sort out for me? cheers

Thanks to Stuart (Magnum5) :D for fitting my HID's on Sunday and getting round the issue of the connector and to my lovely boyfriend for putting my door back together properly It's great having men around that know about cars :hyper: I can see in the dark now.... while driving Now the bell shaped plastic cover (that goes over the light) has got a rip in it where do I get these covers? Also the ballasts are tucked in with some piping as temporary measure where is the best place to put it in a UK Zed, looks like I gotta take the whole light out.... :confused: Help!!!! Would be nice to get it done as the right hand (drivers) light i…

Where is that picture on here of the engine bay with all the labels. Cant find it! Looking for O2 sensor plugs.

Now i have Falken 451's all round on my lowered zed SWB TT i took the chance last night to see how good the grip and corniering ability is. And by gum its good. I can weave the car through bends and roundabouts quickly. And where i did push it a bit to far the loss in traction was gradual with a nice squel from the tyres to warn me. The handling is not in the same league as one of the 4x4 rally car scoobies i suppose but for thrills per pound i am very happy :)

Where is it and whats it do??

Happy Birthday bud :duffer: :duffer: :duffer: :duffer: :duffer: :duffer: :duffer: :duffer: Have a good one :D

Ive seen a uk car on ebay stating its a rare pearl yellow is this the same as the jap eh7 pearl glow yellow or a diffrent colour .Ive seen a few zeds in yellow and the look like a dull yellow mine is a bright pearl im confused thanks taff.

I thought i read somewhere that zed 32s came with forged con rods as standard is this right if so what sort of hp can they take.

For those that might be interested (all one of you ;)) I've posted my old journal back on line: http://www.300zx.co.uk/forums/journal.php?do=showjournal&j=18&page=1&pp=10 There's a whole heap of things that have been done since the last entry and I'll try and get round to posting up a progress report as soon poss. :) Leigh

Look out for my Zed on its way down from sunny Scotland to Ztech tomorrow and thursday. Will be on the back of a truck :cry: Prizes for anyone who can tell me what the reg is :p

guys does anyone know if a (cas) crank angle sensor from a 300zee x is same as one from a 200sx ?? :cool:

Can anyone get replacments? Mine has died!

Spotted a dark blue new shape Micra this evening as I was coming into Melton on the A607 (Leicester side) The Lady driver was frantically waving at me :confused: Would this be the other half of one of our local members? Ivan maybe? Didn't have time to wave back, as I was wondering "who the bloody hell is that mad woman?" :rofl: :rofl: :rofl: (Only joking)

hello, please could someone help me on this 2 things: pistons: http://japcardijon.free.fr/piston.JPG they ae wiseco and they did less than 2000miles. What are this light mark? top timing belt pulley: http://japcardijon.free.fr/toppulley.JPG pulley is less than 2000miles and belt is less than 300miles. Where the mark come from? thank you

hi anyone got any suggestions i have snapped the locking wheel nut tool for the alloys on the zed after i took 4 off any suggestions on how to put them on without the socket unfortunately i dont know where the wheels that have come with the car are from how can i replace the socket or at least put wheel nuts back on????????