General Discussions - 300ZX Related

Any one had enough experiance with this over the past few months to write a guide? The program seems to offer lots more than i use it for (which isnt much really!) but ive no idea where to start! Was thinking maybe someone else could post some ballpark figures for what a standard (ish) well performing zed should look like.... Cheers all

:slap: Had a problem with my 2nd hand power flow cat back system. The flange that bolts to the cats one of them had broken away from the exhaust. No problem I thought, get it welded by my bro's father-in-law. Anyway, had a call from me dad and he's had a look at it after getting home and he says 'it looks like they have welded the flange in the wrong orientation' :cry: My car is my daily drive, I've had to borrow a car today to get to work. Any suggestions appreciated ChrreZ Paul

Ok, I've got a 91 manual fairladyz & 2 questions really. Firstly the spedo cuts out at 95mph & i mean completely, the needle just drops back to 0 & comes back up when i slow down but all else seems fine otherwise. i'm guessing this will be down to the black box convertor thingy but just wanted a second opinion?? Secondly, I was caning it down the a12 last weekend & seemed to hit a limiter in 4th but it was only around 4500 / 5000 rpm, I didn't think this was right as I've been past that in the lower gears. Is this normal?? If not any ideas on this?? Cheers dudes

Things are different from the UK and Dubia. On roads which people speed in the UK, they install speed camera, put in those chicains or even speed bumps. However they are sign posted and because they take so long to install them we all see the new "Traffic Calming" deviced being made. Not in Dubia, they just install a huge speed bump without telling any one to catch people off gaurd. Watch! Especially the Gallardo at the end which takes off.

Renault just use it. I've been reading an argument on the US 300ZX forum about it and I always thought it was a Renault sourced engine. Apparently not, it's a Nissan sourced unit. http://www.carpages.ca/go/conceptcars/2004_renault_fluence_concept.aspx http://en.wikipedia.org/wiki/Renault_Vel_Satis I'm always reading conflicting reports. Need some hard supported facts if anyone knows of any.

This morning about 8.35ish your were heading toward camberley I was heading towards Bagshot in the Grey Zed

hey guys does anyone know how i can dehandle my doors and make them flush by putting in some sort of solenoid, and also does anyone know where i can buy the solenoid system?

Anyone got any links or could tell me how to do this? Cheers

Looks like the Zed is going to have a full blow over. Got the car back yesterday. Bodyshop's done a fantastic job, but unfortunately, the pearl white paint is so old on mine, a decent match couldn't be achieved. The tailgate was a reasonable match, I guess it looks like my car's had some previous blow in work anyway and the paint on the top appears to match very well. It looked spot on under fluorescent lighting which is odd as it's usually the other way round. I considered having it blown in, but the paint on my car has discoloured quite a bit and want a nice crisp fresh look all over. The fresh pearl white is an absolutely lovely colour and far nicer than the …

Hi guys, I need to adjust the neg camber I have on the rear tyres so took the Z to BMTR in birmingham for the 4 wheel laser line up . . . . . . . Well after at least an hour of fighting with the adjusting bolts the operator had to give in as the bolt/nuts were well and truely siezed on. His sugestion was to have the siezed items heated up (which will destroy the bushes) and replaceme the nuts,bolts and bushes with new ones. Anyone else share this problem and if so what is the best way of getting it sorted . . . . . . . I have also heard that if it is burnt out that the bush comes as an integrated part of the top link . . . . . . again your input will be m…

Is it possible to obtain a switch to go between the front fog and rear demister switches on the lights pod. I think it normally has the cruise control there but my Z doesn't use it. I want to use the switch for rear fog lights I am fitting. Can anyone help? Dave

has anyone got any pics of a n/a zed engine without the plenum, inlet gasket and head??? thankies jim

hi all. just had a call from a guy with a 200sx. does anyone know where he can get an AFM from, preferably cheap and with the multi-plug still on it? cheers. si.

as above does anyone know where it is, mine has stopped working and need to find out were it is

So, the zed has gone. A guy just came up and took her so she has gone. he was a trader so I didn't get as much as I wanted but never mind. I was sorry to see her go...kinda sad really!!! I now have my Surf, good spec so will be using that as she will be more reliable. I am sorry that I never got to meet any of you guys but I have enjoyed my time here. I may pop back now and again to see what's going on... Take care guys... ;)

hey guys and gals. im looking for a black swb manual non turbo to part ex or swap with my manual tt. if you know of any one who might be interested email me at your.assassin@hotmail.co.uk many thanks. jim p.s. sorry i didnt post it in the for sale / wanted area, im waiting for my sub privilages to be returned as ive just renewed.

After being away 2 weeks (and having to jump start the car) I noticed coolant driping from under the expansion tank... It's dribbling out of the overflow in the neck. My first port-of-call is to replace the rad cap as this seems to have come up on many previous posts related to similar problems. Was thinking of getting a nice blingy one but they all seem to have a higher pressure rating than the standard 1.2bar. My concearn is, if you increase the pressure in your cooling system aren't you asking for trouble, like heater matrix failure and leaks from any other possible weak point of a 16 year old cooling system...?

Adding a little more bling to the zed. And on the back, from this To this Have more to do yet but got to wait till i can get to the bodyshop.

I just took the zed out for a run after she's been standing for a couple of weeks waiting for parts. The transmission is not all it should be, and im sure its getting worse. Firstly: Cruising along, in 3rd say, slight accellerator causes a clunk, lift off and i get a clunk 'back', both feelable throught the gearstick. What is most likely to be loose or worn? Next up: When in lower revs then you should be, i.e. using 2nd in traffic when you should be in 1st, noisy rattle from the rear. And finally: Cruising in 5th there is an audiable 'buzzing'. Sounds just like a fly is caught in the gear gaiter if you get what i mean (and no im not going to check for…

As title Reg: H773 KXX Seen on Saturday at 11:35am on Putney High Street Black 18/19inch chrome rims (a bit dirty i might add :p ) Non Turbo Standard on outside (except for alloys) Picture: http://www.putfile.com/pic.php?img=3630740

White zed on sunday night behind me I was in Grey K reg Zed following a G Reg RX7

Guys NZR but im swapping the mrs alternator tomorrow, and just wondering if there is anything in particular i should know before getting stuck in? Its an mx5 and access doesnt look too bad, but just wondering if anyone has tips...

Before someone asks this today, I'll answer your question :D TOP UP THE POWER STEERING FLUID WITH ATF DEXRON III HTH :D Andy

Well look what I got this morning. Can't wait to get it fitted. Next stop John Dixon for a chip...

Anyone know the wheel stud thread size ? I need to get some locking nuts. CheerZ Paul