General Discussions - 300ZX Related

http://cgi.ebay.co.uk/HYBRID-3-STAGE-FULL-ELECTRONIC-TURBO-BOOST-CONTROLLER_W0QQitemZ220061019164QQihZ012QQcategoryZ72205QQtcZphotoQQcmdZViewItem ,is this any good guys?????????????/,gettin a boost controller at some point,cheers garry :)

Well ive been without my Z fpr nearly 6 months now,but i can finaly see a light at the end of the tunnel as the last of my bits has arrived :dance: :dance: A big :bow: :bow: to Andy(duff) for undertaking the work as i would have been stuck without him.Heres a list. Heads ported,polished,and valves 3 way lapped Block rebored and waterways cleaned 88mm Wiseco pistons Cometic steel head gaskets Arp head and mains bolts Ultralite race bearings PE kevlar timeing belt PE air impulse induction kit PE mag oil filter Nissmo thermostat NA oil squirters Koyo rad OEM oil pump Full gasket set Under bonnet respray And a new eprom burned to match th…

as above really! within 100 miles or so of carlisle. any experience with unusual paint a big bonus!

These are nice........ http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300062057553&ssPageName=MERC_VI_RSCC_Pr4_PcY_BIN_Stores_IT&refitem=300058724175&itemcount=4&refwidgetloc=active_view_item&usedrule1=StoreCatToStoreCat&refwidgettype=cross_promot_widget $501 shipping to the UK :D 7.5 Fronts and 8.5 rears :bow:

After much cursing,swearing and bashing frozen fingers, the Fairlady lives and breathes. It appears to have been "water" in the fuel system, must have collected in the swirl tank and then fed to fuel rail. For future reference, pump at least half a gallon through the filter before trying anything else, if you ever have a similar problem. Many thanks for the suggestions. Happy New Year to one and all, Pete.

Hi fellas. Does anyone know where i can get 3 of these from and what sort of price they are? Regards Rob

http://cgi.ebay.co.uk/T3-T4-T3T4-T04E-HYBRID-TURBO-TURBOCHARGER-AR-50-60-TRIM_W0QQitemZ220063794115QQihZ012QQcategoryZ72205QQtcZphotoQQcmdZViewItem,not got a clue about tubs,but this might intrest some people :)

I went to halfords and bought some new bosch wipers, Checked with the girl that they were for the 300zx and it came up with size 21/21s for the front. When i put them on, the drivers side overlaps by about 1.5" so it catchs it on the passenger wiper on the way up. Does anyone know what size i need and as mines a jap import does that make any difference? Its a G/1990 model. Same as above again with bulbs, bought the recomended "super brilliance" bulbs size 448sb which is what is says in the book are for the 300zx but when i removed the bulb from the car its a single pin bulb and these new ones are double pin. Going to pop back up there to refund them but if …

I feel I may have put this request in the wrong area(items wanted) so putting it in here also. Does anyone know where I might get an apexi oil pressure gauge from Ive trawled through google with no joy. Any help appreciated. Ive seen the one on ebay but its not pod mounted (in the set of 5 ) cheers

whats the pros and cons of removing this stepping motor and controlling the boost entirely with a manual boost controller. a friend of mine did this in his Z ...

A little advice please gents and ladys, On removing my rear calipers the other day i made a massive school boy error and cracked off two and removed one of these bolts, before i realised they where the wrong ones. In the attached file taken from the online manual it says not the lossen or remove these. have a i made a big boo boo?????

Hello guys, Think I'm gonna ask my bodyshop to remove the washer jets but what gets done with the holes? Do they get welded up (ali bonnet) or are they just filled????? Cheers Vijay

any decent zeds for sale at the mo? getting a bit bored of driving my drift slag everywhere as as much as i love it, its lacking in class! thinking of moving back to the zed world! oh and can someone plz sort my very big signature out!!! j

Any idea the cheapest place to order this from? Also I cant find the site again but one site i found it on had a apexi box to go with it? do i need this as well? what do most people have ?

Happy xmas folks and many many thanks to all customers past and present and those for the future :) Suffolzx is online at the moment, so would you please pick a number between 1 and 23 inclusive and please also confirm I have not asked you to pick any particular number at all. I have no idea who has what number so the winner will have 7 days to spot they have won, then it's another person. Oh and apoligies to those others that I pm'd asking to do this, yer name was at the bottom saying you were online, but physically you wern't, sozzz Cheers smithy

Hic :D

Is taking your zed out for a blast on nearly empty roads :D

When I had the door cards off last, I noticed that one speaker (near side) was an after market speaker in a speaker adaptor and the other side still had the large plastic BOSE casing with little speaker and multi-pin connector. I've just ordered new speaker adaptors to upgrade to 6.5", replacing the nearside is fine as simply, there are two wires plugged into the current speaker that's there, but what wires do I need to split from the BOSE item on the drivers side? I'd have to crimp spade clips onto 2 of the existing wires, but unsure if just doing this will be fine...what colour wires do I need? Also, if I'm disabling that speaker which I guess has the little a…

White kitted very nice. New forest 11.30am Christmas eve

what do you guys think looks better the real JDM lights with the two horizontal black lines (the pin stripes) or the custom ones that i can make for $5 USD without the pinstripping. I could put the black stripes in but im not sure which one will look better and i dotn want to put it together and have to take it apart again to change it

need your help again guys car is now all fixed no faults showing and is not missfiring but........... when i am giving it a good rev and step off the acelerator whilst still in a lower gear and engine is decellerating from highish revs i get a load of pops and bangs and have been told that it seems to have flames coming out of the exhausts, now i think this means it is over fuelling? been told it looks fantastic but is this doing harm to my engine and where do i start trying to sort out over fuelling. car is totally standard uk tt manual with a two stage boost button fitted( dont know what the settings are!) never used to pop or bang, only doing it now car is all fixed…

ok i have been a ford rs man for years now and i am not sure whats the best aproach on a zx i know an engine is an engine but just wondered if there are any hints or tips that can help me? i know about building the engines side ie steel rods,pistons,porting heads,cams,chips and so on but just wondered on the electrical side any gadgets that make a diference? if so what do they do please? im just trying to get my head around them before i get mine so i can get prepared for when i get one soon

Hey, having a problem with the manual gearbox on my TT 2nd and 4th have a whinning, grinding sound. This sound familar to anyone :rolleyes: its going in for a service on the 20th Cheers Ste

Jap N/A Manual '92. Does anyone have a circuit diag of the starter circuit. ie. is there a starter relay? Where can I cut the starter feed for my immobiliser - I don't fancy cutting at the ignition barrel - the Black/Yellow wire is huuuge compared to the puny immobiliser loop - (Toad AI606). I'd rather inturrupt the relay - but i can't find it!!! Dave

as above,i really fancy this kit on my new zed,does anyone know what kit it is?(thinking stillen)and where to find it etc,also if anyone has anymore pics of a 300 with this kit on. Thanks in Advance (pic stolen from kirbz's sig) Paul.