General Discussions - 300ZX Related

Hey all, Remember seeing a while ago a few threads about Royal Purple Oils, can anyone tell me where i can get it from? Cheerz James

When i'm listening to the radio, it cuts out for a second or two quite regularly. Getting quite annoying, just wondering if anyone's got any advice. snx.

trying high and low to find very good condition interior later style without seat belts on the doors i need all plastics and door cards not seats please has anyone got any ideas where i can look :bow:

Guys, like most of us ive spent a fair amount on the Z, but i have standard insurance. Thing is i haven't really spent the money on the looks of the car, more replacing and upgrading other parts. Do you think its poss to include this things on a value agreed scheme? New stock turbos £3k worth of repairing and respraying bodywork (standard shape) Greg Dupree divorced downpipes Greg Dupree de-cat pipes with flex joints & Resonators Greg Dupree X-pipe Sebring backboxes with quad 3.5" tailpipes RPS Street clutch RPS lightened flywheel Apexi Induction cone SE Lowering Springs / New Nissan dampers EBC Grooved Front / Rear Discs EBC Red…

I have magic underpants!!!!!!!!!!!!!!!!!!!! How many people have door handles that have gone grey???? How many people have a matching grey glove box handle? I am hoping to win many of you as new best friends and the female members will want to have my children when I reviel my revolutionary discovery. My mother will want to have me as her son again and I feel it will eventually lead to world peace and an end to global famin and a hike in the IQ of blonde women. Let me know how grey plastic has effected your life and later today I will reveal a cheap and effective solution to your dilema. I will even cure some of you poor sufferers for free when our pat…

my thinking is that if i put a dump valve right before the throttle body the air would escape through the aftermarket valve before it could get back down to the re-circ. does this make sense? would it work?

I have front and rear brembo caliper and rotors of a r33 GTR ...I wanna service them before I put them on .... Where can i buy a service kit (piston and seal kit) for these calipers ???

WHich downpipes work best for a stock set up ??

HB mate - have a great day :duffer: :duffer:

Hi Guys, I would much appreciate some help on a couple of questions. i am in the process of fitting the lambo conversion from zcentre. I had to modify the brackets to bolt the panel on to which is no problem - but have noticed that the gap at either end is about 5mm each side. do i need to fill this or once bonded and bolted just leave it. The panel also is proud at the bottom about 3/4 mm - what is the best way to get this to sit flush without damaging the panel. I am assuming that the wiring is straight forward. I am working long hours at present in an area with no mobile signal so cant really try luke - just wandered if anyone had experienced the same and ove…

Been on z1's stie lookin at exhausts, wots does everyone think of the g reddy sp2 exhausts and has anyone tried the labree?

Guys, Sold the Vette, very sad ! :cry: But back in a Zed !! :dance: :) Drove her back home to Airdrie, from Ossett, Yorkshire, some 250 miles and she went great !! Nowt special, pretty standard, except the old set of BBS. loads of service history and she runs real sweet. Oh, specs are Jap Import, Auto, TT, 1990, Metallic Grey. Will get pics up at the weekend. What is it with these cars that get under your skin ?? Alan..........

Thinking of buying a z very soon and need some help from the experts on here ;-) I have seen a 1991 black lwb twin turbo with 70,000 on the clock. The car is owned by an older man who is retiring now and wants something else. He is the only owner since import and has serviced regularly. He has no modes apart from nismo cat back exhausts, on since import. It has full leather which is bloody immaculate. All in he wants £2200. is this too much? too little? Are there certain things to check for when looking at these cars, and if i should get it are there any things you would reccomend i get immediately?? i have an apexi turbo timer/boost gauge already, but are there…

Anyone know the effect of the speed sensor being disconnected from the ECU? While running the power for my amp I noticed a Greddy speed limiter controler cut next to the ECU with one loose wire so I figured it had been disconnected. With some help from the friendly people at 300zx.com I got the wiring diagram for the Greddy and the ECU. :bow: However when I went to wire it up I found that the connector used to splice it into the speed sensor had come un-crimped and the bare wire was laying behind the ECU! I got everything hooked up properly and it seemed to be running smoother and also seems to have more power. Is it just my imagination or does the ECU go into some saf…

It put a smile on my face Vs I pulled up to some lights on a duel carrage way a gleaming new M3 (330bhp) pulled up along side ( with a youngish bloke with NOGG stile strightend hair) and i said to kim hes gonna have ago, the lights had Allready changed and he had set off Got right up behind him and he couldent pull away. Came to the next set of lights and sat there waiting for the lights to go green, i looked acroos him then looked back at the lights green foot planted to the floor he just got about a Foot in front then WWWWWWWWWWWWWWWoOoOoOoOoOoOoOoOoOoOoOSSSSSSSSSSSSS SSHHHHHHHHHHHHHHHHHHHHHH I started to take the lead Changed to 2nd a…

This Sunday 28th January, BBC2 AT 8PM, Bring it on. :dance: :dance:

YEP ITS BACK ON EBAY WITH ALOT LESS DETAIL ABOUT SPEC THIS TIME 230082223824 :xxx:

hi all, new to this. just bought a mint 300zx tt, import on l plate, bought it from a nissan garage and just having a couple of problems but under warranty so not so bad. The problem is the chorley nissan garage are strugglings to find the solution to the problems. any help would be greatly appreciated. 1. vibration between 40-60mph from back nearside corner. not the wheel balancing gets slightly better after distance so heat makes it better, it can only be described as a wheel bearing noise coupled with an out of balance wheel. strange. 2. knocking when going over bumps from front right, again not as bad when warm. 3.nissan diognosed the vibration as a k…

well the first mot for my Z has come round, im hoping for a clean pass but you never know, be prepared for the obligatory " how do I posts" if it fails :x:

Hi My Zed's still restricted and running in kilometers. I have heard that a chip behind the dash is the easy cure, am I looking in the right direction or am I a total dick.

Ok so hes had my car a week, As i said last time he thinks an injector has gone? So phoned tonight he has the part and hes going to do it tommorow. What else could it be if it doesnt turn out to be the injector.. All have sparks etc he tells me hes ruled out coil packs and the PTU, he says hes cleaned all the connectors, So now hes replacing the injector, So if it isnt that what other options are there ?

hi can anyone tell me what would happen if i put a manual ecu in an automatic car thanx

Anyone got any ideas? I would of kept going back the dealer i bought the car off but hes taking so long to fix this misfiring problem i dont think id want him to do my services/repairs in the future. thing is i dont know of anywhere else I could take it ?

Hey guys, im looking at some forge valves and i need some help?! :( Does the ZTT have an airflow meter? If so is this the right type of valve? or does the ZTT not have an airflow meter? If this is so... is this the right type of valve? :confused: Thanks guys Ethan :)

Laptop with ConZult!! I never really use it, either the laptop or the ConZult...... Laptop specs are.... Brand: Dell C610 Processor Speed: 1.2 GHz Processor Type: Intel Pentium III Hard Drive Capacity: 20 GB Memory (RAM): 512 MB Screen Size: 14.1 inches Primary Drive: CD-RW (Spare CD-ROM) Features: 10/100 LAN Card, Modem, Operating System (XP Professional), USB Complete with a spare 1.2Ghz processor, 20Gb hard drive, 2 x spare screens. 2 X 240v power adaptors 1 X Car/Cigar socket adaptor Case ConZult, complete unit as bought direct from Danny (DTA UK). Unit, lead and CD. In fully working order.…