General Discussions - 300ZX Related

I find myself in possesion of two electric drivers seats, How difficult is it to convert a passenger seat using the drivers electrics I know someone on here has done it, just wondered what degree of difficulty and has anyone done a 'how to'?

Thank you very much for persevering with my ECU your a star

as above i was behind you in the white one :smw:

Has anyone got any photos of the clutch booster system. Need to see where small vacuum tank fits and also layout of pipework. Thanks.

as above is it possible to change the green light to blue one ?????

possible ptu prob????? car runs like shite when cold, it misses whilst on tickover and doesnt accelerate very well, and when releasing off the throttle it seems to miss and doesnt come down smoothly when warm, the car usualy ticks over high, sometimes 2000rpm, and doesnt accelerate very well (seems like it doesnt want to go and im forcing the engine to(if ya know what i mean), and sometimes misses like hell when hamering it have just put a replacement maf on (new one possible faulty???????) any ideas guys oh and i only got 35 miles to £20 of petrol :(

That the UK engine oil cooler is bigger than the jap one. Ta.

Anyone had any success using the article on ttzd.com? http://www.ttzd.com/tech/hicastech.html I've tried about 4 times now and i'll be buggered if i know what's going on. Nothing happens :cry: Anyone got it to work?

hi i will be removing my TT rear spoiler for good.(bloody water logged :rant: ) soon and im wondering what id need.i know i need the pespex strip. but what else would i need? cheers Nick

Ok, heres my problem ive just fitted a pair of Sard R2D2 bos on my upper turbo hoses before the the throttle bodys, ive capped off the holes where the recircs were fitted, now I seem to be getting a fuel cut or something, basicly you put your foot down the boost needle swings round to 14 and then the power stops, then comes on again, it done this in first and second and a little in 3rd the engine has the following fitted; • Custom cat-back S/S exhaust • Induction- A'Pexi Power intake • JWT chip • Boost jets (boost now up to 12PSI) • Timing advanced +1 • Blitz Radiator Cap • Smith fuel lines My thought is the Sard bovs maybe holding pressure bett…

How much should I expect to sell my old speedo for that was taken out of my jap 300zx TT swb slicktop? It's an aftermarket veilside 320kmph speedo with a mines boost controller (0.4 - 1.4 bar). Mileage is on 79491 km and has the usual temp, oil pressure and petrol gauges. Pics...

Hi guys. i urgently need a picture of cam belt covers - anything that insnt just a thumbnail would be great - snag is it needs to be a pic of them out of the engine bay so i can see the whole thing - so if anyone has a pic of them or there engine is out - plz plz plz can i see it. cheers guys

Good afternoon, Im from the Netherlands, and and I want to place bov's on my zx tt. But I don't know which type I shall choose! (I want to be heard :D) So I read on this forum that bov's from TurboXS are loud. But I never heard them! My question: Who can help me with soundclips from bovs on a zx tt? :bow: Thanks, Sisckywous ps. Sorry for my bad English :headvswal

Can anyone tell me how much an automatic gearbox weighs for a 300ZX. I've just bought one and i am having it shipped to Motherwell but the company i've arranged delivery only deal up to 50kg, this is just under 8 stone. I thought this would be ok but now i am not so sure. If the weather had been better i would have had my own off by now. (I've re-posted this as it was in the wrong forum, sorry)

Can anyone tell me how much an automatic gearbox weighs for a 300ZX. I've just bought one and i am having it shipped to Motherwell but the company i've arranged delivery only deal up to 50kg, this is just under 8 stone. I thought this would be ok but now i am not so sure. If the weather had been better i would have had my own off by now.

Hello all!, I have posted a couple of times about this problem and had no joy? I have a 91 uk spec twin turbo with an auto gearbox I have two problems with it, the first is:- When driving on cold engine I select reverse drive back and after a few feet the box seems to click into a mode as if i was using the brake and gas peddal at same time its fine when warm. The second problem is:- when driving forward hard the gears go 1st to 2nd then 2nd to 4th after a few seconds it kicks into 3rd then to 4th. I have tryed the diognostic gearbox test but it doesent work? Can anyone please help me with this??? :confused: And thanks in advance!!

has anybodu repaired the speedo witht the common fault off stopping working as its deffo the speedo as the data scan was picking up speed readings when it goes off and I have another set of clocks the with the same fault?? richard

these were sold to me stating 300zx bulbs..how can they fit??

What are they like to change, I have just ordered two, so do I need a press or can I do it at home. Cheers, Scrawni.

Last night my car started to refuse to go into any gears, I eventually, with brute force manged to get it working but you really have to push it very hard into any gear now. It does not crunch and does it in every gear so I dont think its the box (praying its not!!!!). I could smell clutch at the end of the journey, not badly, but I could definitely smell it. It gets slightly easier the further you drive and if you double de-clutch but its not right. I had an RPS fast road clutch fitted about 1000 or so miles ago, its always been a bit stiff. I also had my gearbox oil changed about 100 miles ago. The car leaves no oil deposits on the floor when parked. Are RPS c…

Anyone used an NA clutch pedal in a TT? I have heard they have a longer pivot so dont need the booster. Anyone done this, hoe effective is it? Is it easy enough to do? Thanks, Ed

can someone tell me what these wheels are originally from.

just wanted to give a big thanks to wozzer!!! after all its not every day a mate lets you rag his Zed for a few hundred miles, to the point of blowing up the engine, then puttin you up in a hotel and feeding you alcohol for 24 hrs there after!!! forget the car of the month...... this bloke here is the member of the month!! CHEERS WOZZER :duffer: :duffer: :duffer:

blue ZED seen drifting round every corner, three feet in front of me!!!! i was in wozzers silver Zed was it you?????? pmsl

i was just reading about another zed engine that has gone bang and it got me thinking about engine conversions..... Why hasnt any put an RB26 motor into a zed yet??? its nissans most bullet proof, and probably most tuneable engine, so surely its got to be favourate for a transplant into a zed. I know that its set up for a 4WD transmission, but there are a fair few GTR's that have been RWD converted? If anyone knows of anyone who has done/tried it, or of any reason why it cant be done feel free to enlighten me cheers in advance Nick