General Discussions - 300ZX Related

Heading into town centre through frankwell, about 3:45pmish! Nice Zed who ever owns it!!!

Right, looking to get a rear bumper for my zed. Seen quite a few and really like the kaminari rear valance but think I might have issues trying to source it. Other one I quite like is the stillen GTZ rear valance. Does anyone have pics of the stillen one. Think someone on the site has them fitted. cheers ronnie

Hey guys I am isntalling an illuminated boost gauge on the driver's side (LHD Jap Z). I need to find a power source in the driver's side kick panel full of wires that is only 'hot' (powered) then car is switched on - THe car is a '90 Z TT - What colour wires should I be tapping into ? Thanks!

parked car, heard a hissing opened bonnet and steam its pissin out coolant the coolant is brown and sludgy (head gasket is fine, its been brown for a while just never flushed it out and cars driven fine and not overheaten) i cant pinpoint where its steaming but know the area but the car cut out on me, it does start but after 30secs starts to steam up and would probs cut out lots of coolant has got on the big fan at the front and the belts its comin from here

Hi all. About 2 days ago my car began to splutter when started up, searches for idle and won't go well till warm. It did the same today too. Runs great when warmed up but is a real dog when first started.... Does anyone know what could be causing this. It has done this once before but just the once then been ok. Thanks in advance. :confused:

ok boy's/girl's........ the date is wed/11th april.....meeting point is my house.....3pm..... 24,st vincent's way EN6 2RG..... here is the link.. http://www.candyrun.tv/ 1.speedfreak 2.wozzer 3.silverbullet 4.fairladyzgirl/andyduff 5.j the gun 6.john300 7.royal 8.petey099 9.stickers 10.bantambuuny+steve this group is now FULL......!!!!!!!!!!!!!!!!!!!! and i have just been tolled that the sundaysport,FHM,NUT'S,M&M'S,and many more lad's mag's will be there .... :D :hyper: this is going to be ONE MAD night ... ;) ;) thank's wozzer ..... ...

I no theres been alot of post on this latley but to be honest i dont understand how it all work so wo#hat would be needed to fit these on a zed if they would go at all?? The front wheels are 8.5 x 19 with an offset of 41.9. The rear are 11 x 19 with an offset of 55.3. thanks graeme

Im looking at the old N/A rebuild, and what cams to put in it. I have been offered Tomei cams, 264intake with 272 exhaust, or 270 intake and exhaust. Im unsure what effect this will have, and as im not looking at building a full blown racer, (If I was i'd have bought a SWB slicktop and TT'd it!), just something a tad quicker. I wondered if anyone had researched it and had ant info?? Also, I'd rather not have the tickover excessively lumpy while ticking over. Decided on the pistons, as I was going to fit some big 90mm, 12:1 compression ratio beast's, but have decided to drop the compression ratio down to 11:1. Any further info anyone has, would be greatley …

COME ON YOU GUYS TIME TO PUT YOUR MONEY WHERE YOUR MOUTHS ARE ,,ALL YOU GUYS BETTER SORT THIS OUT ASAP TO AVOID DISSAPOINTMENT ,THIS MAY BE THE ONLY TIME YOU GET TO BE INVOLVED IN SOMETHING LIKE THIS,SO LETS STOMP UP THE PONIES YEAH . LOOKING FORWARD TO THIS BIG TIME AND IM SURE WE WILL BE TALKING ABOUT IT FROM YEARS TO COME,, ALL THE BEST JASON The Missing 300Zxs from the Z Parade The following users expressed they where coming to the Z parade and JTS have not booked in yet and the cut of date for reduced tickets is only 3 weeks away There are 83Z/ZXs booked in for the parade and out of this only 25 are Z32s Out of the 25 Z32s booked in …

I don't really know how to explain this in english so i hope you will understand from the picture: I found a new clutch kit from os giken and i installed it yesterday but as you can see, we had to push back the fork to install the "clutch command" Any explaination? Should i cut the small axe out of the command?

Hello, wondering if anyone has designed a single plenum? Something which looks a bit like this: (photo from http://www.mdcracing.co.nz) Would be keen to hear if anyone here in england makes them. Cheers.

Anyone know if any other Nissan lock barrels interchange with the Z?? eg Micra ,Primera etc Ta very much

red z near twineham at 4 friday comeing down hicksted lane. :D

Found this for sale and wondered about opinions. Never seen this kit before.

i cant remember this being said previously so i thought i would share it with you... was watching american pie 2 last night and noticed there is a red 300zx convertible passing through the scene where the boys get to the lake resort and are in town searching for summer jobs. its only a few seconds but it looks like a minter :D so... films with 300'z... American pie 2 Kill Bill 2 that gay looking boy racer jobby that was discussed on the forum a few months ago... any more?...

Someone is coming to look at my zed tonight and seem very intrested in buying they are coming from derby so fingers crossed they like it :D but i will be very sad to see it go :cry:

shame it will be shit again when it rains. http://www.corsasport.co.uk/board/viewthread.php?tid=347865&page=1

i was on the other side, it was about 10 in the morning.

...you haven't got rid of me that easily :tongue: :hyper: I've had a chat with my dad and brother and we're going to pool our money together into one decent lowish mileage estate car :D Primarily it's going to be a 2003 Mondeo 2.0 130bhp TDCI GHIA Estate 50mpg+, 6 gears, comfy and reasonably quick and big enough to lug the rubbish in the back of, tow a caravan and do all the long distance driving in. £478 fully comp with him and my bro on the insurance. Which means i can keep the zed as a weekend car on classic insurance, it's having the suspension set up properly next week and i have a couple of spare 235 tyres that can go on in the meantime to …

EXTREM_IMPORTS hope you have an awesome day! :D xx

A few weeks ago the horn started beeping by itself when the car was on the driveway, it went on for about 3mins then stopped then 1min later went off again, fixed the problem by disconnecting the battery, when the battery was connected again (about a week later) the problem disappeared. Just got home today and its doing it again, this time its continuous, disconnected the battery, every time i put the +ive back on it beeps. What can i do? I very rarly use the horn, a hand gesture seems to do the trick better, where abouts is the wire to disconnect it? Thanx Nathan

How much roughly does this cost ? and do you need any extra bits or does it literatly come off and then get sprayed

Choices car park norwich, you had crutches?! :)

I have a 1990 300zx n/a and my steering wheel is worn out pretty bad on the top. Any recommendations on replacement? whether standard or aftermarket? I do want to keep cruise control as im lazy

i love the Easter bunny :bow: