General Discussions - 300ZX Related

arrived and ready for dispatch ......cant wait to get this lot fitted :nana2:been zedless since May now :(( :cry: 1. Stillen ARB's 2. DTA S/S Radiator Pipe Kit (red) 3. DTA S/S Boost Pipe Kit (red) 4. DTA Performance Chip (555cc) 5. Power Enterprice PE1420 Turbos with fitting kit 6. S/S Turbo Oil Feed Hoses (pair) 7. Wiseco Pistons (87.5mm) 8. Nismo 555cc Injectors (incl. O-rings and insulators) 9. Water By-pass hose kit (pair) 10. Engine Gasket Kit (excl. head gaskets/ incl. half-moon gaskets and turbo gaskets) 11. Cometic 1.2mm Head Gasket (pair) 12. Eagle Con Rods 13. ARP Head Bolt & Stud Kit 14. Mike Smith Manifolds (pair) 15. mir…

where is best to get one? Is there any cheaper options that are just as good?

http://cgi.ebay.co.uk/Nissan-300ZX-920-BHP-Monster-Drag-Race-Car_W0QQitemZ170246783552QQcmdZViewItem?hash=item170246783552&_trkparms=72%3A12%7C39%3A1%7C66%3A4%7C65%3A12&_trksid=p3286.c0.m14.l1318

I see a H reg standard looking Zed in Kingswood Basildon near where the Ford garage used to be. Is it you Mk300zx

Anyone know the easiest way to gain access to the washer motor? Is it attached to the washer bottle? I'm kind of guessing it may be through the wheel arch but thought it'd save time to check before pulling bits off.

I removed my rear spoiler tonight, what a job! Does anyone know of a good adhesive remover to get the remaining glue off? I cant seem to shift it even with good old fashioned elbow grease!

I had a power failure last week:confused: Car has been fine since i went over a lot of connections and tightened/cleaned them. But took the car out tonight and noticed when i walked away from the car,i does not lock. This is the 1st time i went to lock the car since the problem last week as i have a large integral garage and the car is always in there but never locked. I have owned the car for 6 years and have NEVER used a key to lock/unlock the car,and because of this they are seized:xxx: Any thoughts people?

anyone ever had this done before??????

one rear light not working :D could have been a lot worse considering it's been off the road since christmas. should be ready for me to pick up tomorrow.

Hey, I have the opportunity to buy a front mount intercooler and all the kit required for an easy fit. Only thing is that i dont feel like i know enough about ic's to know if its a good deal of not? So if you could give me your opinions, id greatly apreciate it! :) Heres the details: Front mount intercooler, pipework & silicone hoses for the 89-97 Nissan 300ZX Z32 VQ30DETT by AUTOBAHN88, all years all models. The intercooler core size is a massive 515mm x 210mm x 70mm and has a pressure drop of only 0.2psi @ 15 psi. The intercooler is polished aluminum with a bar and plate design. The pipework is polished aluminum. ABS and air conditioning do no not nee…

Northbound from Bristol that is! Was it you! :)

me in the blue saxo followed by red zed through hayle B17 PUB look great with those front and back lights.:D dan.:smash:

Mods/Local group organisers Not sure were to post this Invite from the Z club info taken from over there Posted by the ritchiep who organising it for us >>>>The time has come again - I have received 20 passes for the second Tatton show of the year, on the weekend of August 16th-17th. We have, as before, a double sized plot, this time in a better position (still on the back row, but nearer the main access track, away from the big trees). For more info visit http://www.zclub.net/forum/showthread.php?t=12554

Flashed past the camera at 1:24 this afternoon!! :D

As some of you may know nearly 4 weeks ago i was involved in an accident in my pride and joy. No fault of my own, and in fact the third party has admitted total liability. My car is pretty smashed up, - drivers side rear wing, door, front wing, front bumper, headlight, pass side front wing, door. 2 alloys, pass window, both wing mirrors. went through all the right channels with insurance etc. assesor came out last week, personal injury stuff all done. when i took out the policy last year i went with MCE as a few people on here told me they did "agreed value" policies. so rang them, went through all that had been done to my car in the minutest detail and th…

I know it was raining, I'm just wondering what sort of times you guys ran ?. I couldn't make it in the end. Had a bunch of decking delivered in the morning and had to shift it all through the house to the back garden.

should be coming soon i've ben looking for how to but have'nt found one yet can anyone help

How do I adjust them. I take it I loosen the nut on the top of the strut then screw in or out the threaded middle part to soften or stiffen them. My question is which way does what, screw down for stiffer and up for softer or the other way around ? Also does it 'stop' on its lowest and highest setting or could a go too far and it come out ? CheerZ Paul

Help please! :confused: Mine are Jap inertia and dont retract well- infact passenger one just given up completely with a couple of yards of belt laid on the seat! MOT in 2 weeks as well! Are there reliable ones from other motors that fit or any tips to make em function properly? Regards Dave

Does anybody know of anybody that has put a V8 engine in a z32? If so could you please pass on any information you have about their contact details and if possible any information about the conversion itself. Thanks, Dan

After having bought these from Tony Lack:duffer: I now have them fitted. They are cross drilled 355mm discs + hooooge Aston Martin 4 pot Brembos. (Also bear in mind that they are fittted behind 19" alloys:nana2:) Thanks to Sykes Engineering for manufacturing the relocation brackets and spigot rings and also thanks to Kev at Vehicle Services for fitting them:duffer: Stopping performance is awesome and they look absolutely superb.............:hyper: (IMHO of course:D)

As above saw a standard red import zed parked on eastbank st tonight, probably be about 6.30pm. Looked standard except the wheels. It was an L-Reg with a table spoiler. Looked tidy :) Was it you???

Hey guys and girls What is the recomended wheel width on a non wide arch car? Mine has big Ksports calipers and disks so do I definately need 18's or qill 17's do? Cheers

I saw an awsome blue zed with what had to be 19" wheels, 19" wide on the back, high top spoiler, twin rear lights... I passed it on the m25 between j27-28 clockwise, it passed me again in the rain and pulled in and there was so much water coming off those monster wheels i had to pull out again. :) Great car! I was in my white zed Anyone on here???

http://www.youtube.com/watch?v=0bUxi_Eo6fU&feature=bz301