General Discussions - 300ZX Related

:headvswalI have a problem where the Air con, power mirrors, wipers,cig lighter etc have no power. I have checked all fuses and have found there to be no power entering the above fuses inside the drivers compartment. Where does this power come from and how can I find its source??? Preferably without having to rip everything out to do so. If I apply a positive lead to the wipers fuse (from the front)the wipers work. I assume the same will ocur for the rest.

nowt to do wi me, but there is someone selling a fooked zed in essex, and its got a set of modenas on it :cool:

hi guys a have been trying to do a 300zx brake conversion on my 200sx trouble is i went to nissan and asked for the pad retaining pins and they ordered them but i just trys the pins and they dont fit properly in my opinion they are 1sloppy like there is a mm between the pin and the hole and 2 they arnt long enough you can kind of see the hole in the pin but only the edge is there 2 types of pin and if so any idea what part number i could ask please help thanks guys btw 300zx are mental shame i cant afford 1

As above, An online template would be best, i need to knock up a filter adapter

yea just cut the front off n throw it on ebay....... http://cgi.ebay.co.uk/NISSAN-300ZX-3-0-Z32-1989-HEADLAMP-BUMPER-AIRCON-PANEL_W0QQitemZ200302148788QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item200302148788&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318#ebayphotohosting

i dont get it??? http://cgi.ebay.co.uk/300zx-flare-z32_W0QQitemZ260356945803QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item260356945803&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318#ebayphotohosting

hey people, am looking to get my 300 in for the dredded mot this weekend, and the only issue i have is the front indicators. am in the process of installing led front repeaters. have posted here before about how to wire the little blighters up and got good response from fellow members with the answer being, just leave the original indicator inline. anyway, went to the shed to get the old bulb holders and...... can i find 'em!!! no!! so, has anyone in the suffolk/norfollk area got a set of front indicator bulb holders they do not need?? am looking to try and fit my repeaters tomorrow (saturday). al.

buy this? http://cgi.ebay.co.uk/Nissan-14-Pin-Diagnostic-Interface-Tool-RS232-ConZult_W0QQitemZ250364964741QQcmdZViewItemQQptZScooters?hash=item250364964741 is the na z32 14 pin? i cant see why this wont work?

Evening, I began stripping out my Z boot trim today to replace the rear shock struts and was surprised to find an electrical actuator sat on top of each shock. Looking in the manual and comparing to my car though, I dont have the suspension adjustment control on the centre console. My question to the Z gurus is was this normal fit for a UK, manual, twin turbo ,1994 ? I cant understand how the equipment would be fitted but not the control panel? Does anyone know?

what is the second bleed nipple for by the hicas bit under the bonnet and why would i need to bleed that for the clutch? cheers

Dates for this year's summer JAE are now out :hyper::hyper: Have a look at the JAE thread in our National Events section and then get your names down on the list. http://www.300zx.co.uk/forums/showthread.php?t=122240 The venue looks superb and it's a lot further north than it was last year. Get your holidays booked in.

how many peeps in your family own zeds ? 1)Me x 4 2)Zoe x 1 3)dad x 3 4)mum x 2 5)sister x1 6)brother x2 plus a few breakers LOL thats 13 my family own and drive right now !!!! :eek:

Hi all, Seeing its now been well over a year since I had my Zed I think I need to get this out of my parents garage! Its in nice condition and the paint is still nice and bright. There is a small pin dent near the front but otherwise a very nice bonnet. If someone wants to collect it from my parents house in Salisbury then they can have it! Can send pics if you want. Anyone?

Hey guys I bought an ebay short shifter I think it was 2 fast 2 cool. Anyhow. Its shorter but not that much shorter. Whats the shortest short shifter you know? Cheers Ron

Was under my car the other day and noticed that the front and bottom of the engine looked quite wet with oil, the engine has not long been built and put in, I will get Zedworld to have a look next thursday whilst getting my ebc installed, any ideas what it could be? If its going to be a big job, the garage who did the work on it will be sorting it out for me.

Hi there everyone, Was overtaking earlier and as I put my foot down a bit more to pass I lost power for a moment like a rev limiter kicked in. I came off the power and it went back to normal straight away. This has happened twice this week, both times exactly the same. It kicks in about +7 psi boost. I know safety boost cuts in at +7 but mine dont do it all the time. Haven't noticed anything else wrong. Car is a 1991 UK TT manual. Any help would be awesome. Many thanks, Rob

I started my car and drove it today for the first time in 4 weeks, the engine started on the button and drove perfectly straight away, jeff at zedworld will be fitting my ebc next week and sorting out any niggly problems with it, I cant wait.

hi my tailgate closes fine, but when it is closed it can still be lifted slightly. is this common on zeds? can i tighten it down so that it doesnt move? it wont open when its closed so the catch is working fine but it lets damp in where its loose! when its closed i can hold the corner of the tailgate and lift it about 1 inch! any help or advice would be great thax mark :headvswal:headvswal:headvswal:headvswal:headvswal

http://www.pistonheads.com/SALES/893961.htm

.....Nice Z, Until I enlarged the picture of the rear. :D http://www.pistonheads.com/SALES/882477.htm

Just found my dream engine bay and hopefully with the help of the club I will one day have it. this is a car in NZ, you can see the ebay add 550Bhp :mac1:

Hello. Was wondering if anyone has bought the bovs from the american ebay? also what are peoples thoughts on them? http://cgi.ebay.com/ebaymotors/Type-RS-Blow-Off-Valve-Red-Universal-GTR-Skyline-300ZX_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a3Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem250368692316QQitemZ250368692316QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.co.uk/1990-NISSAN-300-ZX-2-2-RED-TWIN-TURBO_W0QQitemZ290294747751QQcmdZViewItemQQptZAutomobiles_UK?hash=item290294747751&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A7|39%3A1|240%3A1318:rofl:

This post may seem like going back to basics but we are constantly surprised by the amount of people who do not know or understand what is written on a bottle of oil and therefore have no idea of what they are looking for, buying or using. This post should help as a basic guide, for more detailed information contact us and we will be happy to help. So, to be blunt about the subject, if a bottle of oil does not contain the following basic information then DO NOT buy it look for something that does! 1) The purpose for which it is intended (i.e. Motor oil, Gear oil etc) 2) The viscosity (i.e. 10w-40, 5w-30 etc for Motor oils and 80w-90, 75w-90 etc for Gea…

Has anyone (or has this already been posted) heard about the revision that was brought in to the MOT test this year? Basically says that if you exhaust(s) is louder than standard it is a fail. The official wording is "We have made a slight amendment to the RfR, which now makes it clear that the comparison is with a similar vehicle with a silencer in average condition" :eek::eek: