General Discussions - 300ZX Related

:confused:Will these fit fr.8.5x19 45 offset and 9.5x19 35 offset i reckon the front should be 35 offset same as the 19's i'm replacing but the supplier reckons sticking a 5mm spacer behind the front wheels any thoughts please

Just two pictures of the car now it is sat back down with the lowerings springs fitted. Will post more tomorrow as I have just picked up the side skirts from the paint shop but it is dark now. Started on the intercooler system to, what a headache :headvswal

anyone on here parked on leonard road on sunday. was grey with a uk rear bumper (me thinks) and ferrari rear lights.

Sounds stupid but does anyone else's car give off a weird smell from some the rubbers, the headlight rubbers seem to be the worst,always noticed it since owning the car but as it's been stood for 6 months it seems stronger now.

what price would this be http://www.carsensor.net/usedcar/detail/CU0003717904/index.html

Well very very very nearly.... The interior anyway :D olny have to mount 2 LED's in the rear quarter trim for the alarm repeaters.....an retrim a feew pannls i'm not happy with/got damaged in storage.... Dropped Abi of at School and was back home by about 9.15... straight out on the car and getting it all fitted, fixed, soldered, replaced and refitted.... One of my buddies even popped over for an Hours chat... in his R33 Skyline, V nice motor...... Heres the finished pictures..... 1 happy chappy here, even managed to clear out and hover the inside, just need to clean the out side now........ oh and re fit the foot rest lol …

Hello, my car started being wierd this morning, i turned it on to go to work and the clutch biting point is now really close to the floor (was perfect last night) and the gearstick has become very very stiff to move. any ideas? The gearstick was a lot looser on the way home but still pretty solid, the clutch was still on the floor

Can anyone post a piccy of the Oil Pressure Gauge Sender on a Jap N/A 1990 ? Mine is knackered and I think I've found a new one, but cant get under to check if its the right one before I buy it. If no-one has a pic. does anyone know the original part number. Cheers.

Hi all, I discovered the other day that I have heated mirrors! Awesome! However, what isn't so awesome is that I have in fact got heated mirror. As in the driver's side one. The passenger one doesn't work! Is this a common thing with a common fix, or shall I just pull it apart and start checking?

Who is the best person to get one of these from, and how much? And also, a price for a set of flywheel bolts..... Tudor...

As you may well know my Zed is currently stuck in my garage with the front quite severly damaged due to some old dink pulling out of a side turning in her Focus. By the time I hit the brake I was colliding with her front wing. My car is repairable but the cost of parts alone is quite a sum. A Border front mount and AB Flug front panel is just over £2K, plus the other radiators, front wings and bonnet, lights etc., and an inner wing. No doubt my viscous fan is mullered too. The man from the bodyshop states that it is 'beyond economic repair'*. I do not have an agreed Insurance value, so where do you start with a valuation especially as prices today are grim. I have spent s…

Any recommendations for speakers that fit the standard holes? I need my boot so no giant sub nonsense for me! Front and rear please! Ta Bob

any idea where to get these from or what d most people use as a substitue :) cant wait to fit my bovs but need these bungs sorting first :x:

Hey guys, just thought id post up a few pix of the cruise i went on recently. We were planing to head up to the Great Ocean Road which if some of you remember was awesome But had to change our plans due to bad weather conditions the day before. Anyways couple of us Z enthusiasts meet at the original meet point for the GOR and pretty much made up organised a cruise meeting other members during the day. So here are the pix, hope you guys like them.

Just a quick public thank you to stu (SMW1) and to john dixon 1ST to stu all the work put into car it all works v-well thanks bud. By no means 2nd john all the work on the mapping on sunday a long day but wekk worth it thanks bud. Oh and a very happy new owner here if you can`t tell.:hyper::hyper::hyper:

What is the wheel in my avatar? Is it a std Series 2 jobbie? Thinking of going back to a std Zed one form the small momo I have. Cheers

Hi I have purchased a cat-back delete kit including the new elbows. In the process of removing the existing cats section I have sheared two bolts from the left three point hook up to the stock elbow. This even after much soaking/heat etc. So my question is - based on my experience to date and the above - I am pretty sure the turbo elbow fittings (two studs and two nuts) will be [hell of] a LOT harder!!! :hurl: I need to know that if I shear a stud/bolt on the actual elbows - will I be able to recover/drill out without removing the engine etc etc. Your guidance as ever is appreciated. ;) AndyGP

on the A428 coming from bedford this morning at 7.15. al.

any comments on these intercoolers :cool: http://cgi.ebay.co.uk/Side-Mount-Intercooler-Turbo-Nissan-90-96-300ZX_W0QQitemZ170308479353QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item170308479353&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 http://cgi.ebay.com/ebaymotors/GODSPEED-90-96-300ZX-Z32-12X7-5X3-5-S-MOUNT-INTERCOOLER_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1683Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem350177435310QQitemZ350177435310QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Ok, my UK twin turbo has been running a custom stainless decat with four 2.5" tailpipes and two small sport backboxes for about 18 months now. The car sounds great, and has just begun to start popping when I lift off the accelerator. I am now thinking of having the two silencers removed. Obviously I know it will make the car louder, but, will it also make the car sound much different; both on tickover and on full boost? Also does anybody have any ideas whether it will pop and bang with no silencers installed? Cheers, Dan

just saw this in japan and i like it :) yes lose the silly rear spoiler but once removed i think it would look ace Mike ps it helps that its got 750 bhp as well LOL

Hi guys just put my spare wheels on 2day,getting others recoated and ive got to say i do like the look of the spares,wot do you think ? my 18 my spares

Well i lasted 6 months without a zed, and im happy to say i took purchase of stevie007's(top bloke) zed today. it needs a bit of work cosmeticly and maybe a couple of performance mods but all in all it seems to be an excellent example, and a great blank canvass although this zed is going to be slightly more subtle than my last one. hope to see you at a few meets and shows sometime this year. cheers si

Going to be getting my engine rebuild shortly and was wondering what my options for turbos are (as 1 of mines has seized) I was originally wanting to have them reconditioned but im now defo wanting to buy brand new ones so i have peace of mind. How much would i be looking at paying for 2 new standard turbos + what is the next ones up from standard etc as i would maybe think about getting better ones than standards depending on cost + power differences. Cheers

just spent 4 hours trying to bleed the clutch through the three bleed nipples as per the online manual . soon as i start the engine. no peddle pressure clutch fork goes about halfway. anyone any thoughts billy