Alic

They're going for the same style, the kaminari is just, slightly less pronounced...

He caught the plane back.

I think its a kaminari variant | | | | | This was the ad for anyone interested:

To be fair, only a small corner of the car is on grass, so the front wheels of the jack (under the diff) were on concrete, and the back on grass. And I has some sheets down so i didn't get wet ;) Manual box out next week :)

Interesting. Nissan always comes up with the strangest cost cutting measures :wacko:

First line, is there a seal at the top. Yes, the bonnet sits on it, but it's not inbetween the two.

Definitely better, but still looks old to me, would prefer a less bland plastic shifter.

Yep, seal top and bottom

I think that cable will do. I would run it inside the car either along the sill or tranny tunnel as outside it may get hit by a rock and ground to the body or something. What is a low profile place people put theirs without being too much in the way? I know some people just put a box in the boot and I think thats an illogical solution. Would it be wise to cut a hole in the boot floor to sink it down flush with the floor and then weld a box around the bottom of the battery? What is people's advice?

Hope you had a safe trip back Mike. Nice meeting you.

4"x6"

Following the generous help of wchestnutt, today we finally got the rear subframe out hoorah

Just before I throw this up on ebay, does anyone want this MOMO steering wheel? Retails at £220 but its at least 5 years old. Has some general wear and tear, a scratch on the right hand side on the leather, but other than that the leather is flawless. One of the chrome rings has some chrome rubbed off and some small wear on the central chrome ring. Pictures. £45 +postage

Here's what's going on lads You can see in the 2nd pic that the surface is supposed to be glued to the plastic, and should be right up against the edge where the brown stuff ends. This means that it doesn't just peel up but also back away from the top. In the last two you can see that when you glue it, you really need to stretch it then glue it so the vent sit nicely on it. Yes Jake those are your vents. Are bring posted tomorrow.

U̶p̶l̶o̶a̶d̶ ̶p̶i̶c̶t̶u̶r̶e̶s̶:̶ ̶h̶t̶t̶p̶:̶/̶/̶w̶w̶w̶.̶3̶0̶0̶z̶x̶.̶c̶o̶.̶u̶k̶/̶f̶o̶r̶u̶m̶s̶/̶s̶h̶o̶w̶t̶h̶r̶e̶a̶d̶.̶p̶h̶p̶?̶1̶8̶3̶4̶5̶3̶-̶U̶p̶l̶o̶a̶d̶-̶i̶m̶a̶g̶e̶s̶-̶f̶o̶r̶-̶N̶o̶n̶-̶S̶u̶b̶s̶c̶r̶i̶b̶e̶d̶-̶m̶e̶m̶b̶e̶r̶s̶ O̶r̶ ̶y̶'̶k̶n̶o̶w̶,̶ ̶f̶i̶n̶i̶s̶h̶ ̶t̶h̶e̶ ̶s̶u̶b̶s̶c̶r̶i̶b̶i̶n̶g̶ ̶t̶h̶i̶n̶g̶ ̶a̶n̶d̶ ̶c̶a̶n̶ ̶u̶p̶l̶o̶a̶d̶ ̶t̶h̶e̶m̶ ̶t̶h̶r̶o̶u̶g̶h̶ ̶h̶e̶r̶e̶.̶ As you're subscribed just click the picture button, then choose files and upload. Yes it would be naturally aspirated then, and I would guess it's a 4 seater. It would be nice to see the pictures, if its in good condition then it might sell well but don't expect a fortune from an na auto :(

Hi Kate welcome. Is it a twin turbo or a naturally aspirated, and does it need to sell quickly or can you wait for a bit for a good buyer. You can subscribe here if you want to sell on the forum. You will more likely get a proper enthusiast to buy it here, but may take longer to sell. It would be nice to see some pictures of it :) Ali

Ok, on earlier versions the block is a much smaller thing for the passenger side as it doesn't require power.

Nice, but what's with the connector? I'm pretty sure that's the electric seat connector block but its just for the seat belt on your seat?

Old desk chair frame+ = best gaming seat

Hmm, mine weren't that bad. The lip just rose from under the edge of the vent but it still fits in.

Yeah they generally do that. Both my cars have it, but it's not that big of a deal for me. I've got one here next to me and personally I would take the dash out, put some glue under it and clamp it down to dry.

I think bronze is a great colour. And I'm pretty sure all swb/verts have a decompressed spare wheel.

Nice prop. What turbos are they. Brand new or stoclies?

I think Jimmer and Mark Kent both supply them.

I do love bronze Zs, a bronze very was up for sale a couple months back so maybe this is the same one. I do prefer verts with spoilers, is that a factory spoiler, it looks like a flat 99spec. Did any verts come with spoilers?