Paul C

The lower plenum is also different. You need a newer style lower plenum or get your one machined out to take the new style injectors as far as I know. Am sure someone will confirm that has done this :)

I would avoid part worns - a lot come from crash damaged write off vehicles that may have had damage to the tyres when the vehicle has locked up or slid into something!! There was a report saying that many tyres sold as part worn were not fit for use (even though they looked physically good on the outside)!! :oops:

Falken are a very good mid range tyre but may be a bit more than £70 (made by Dunlop) Budget wise - next one down is Matador ( made by Continental) or Kumho Nankang or Primewell ok as budgets go but dont expect too much from them LOL!

Personally I would go for the Skyline - I dont really like the look of Supras but thats just my opinion. The other thing to consider is the GTST is going to be far more tunable than a NA Supra so if you want to start tweaking it the Supra is going to be very limited being an NA compared to the Skyline

actually - you can switch them to cooling mode too!!! :lol:

or just buy a real scarf!! :whistling: :lol: good ol Merc - do you know we have heated cup holders now LOL!! :detective:

What he said LOL!! UK Series 2 :)

Mines got heated seats as standard!! :yes: Nice and warm & cozy on these cold winter days!! :tt2:

did we ever find out what the diffuser was made of?!

A friend of mine has seen this: http://www.ebay.co.uk/itm/ECU-Master-Digital-Ecu-Tuner-III-MAP-Sensor-/290656283043?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43ac76e9a3 He's looked into it & seems quite popular in Poland where it is made. £158 including a 4 bar MAP sensor!! Anyone seen or heard about these? Hes probably going to get one for his Celica GT4 so will be interesting to see how he gets on! Bargain if it works well

Nice!!! http://www.ebay.co.uk/itm/UNIQUE-R8-STYLED-FORD-COUGAR-V6-/110817076771?pt=Automobiles_UK&hash=item19cd366623 LOL!! :lol:

not all cars have this for some reason - my UK '93 model does not! I used to short the pins out to read the codes before I had datascan You can also put it into "mode 2" which checks the O2 sensors as well!

Done mine about 4 years ago & it has been fine - even being off the road & not used for 2 years inbetween LOL!! Checked it a while back & no play, seizing or roughness at all!

what, with tassles?! :tt2:

LOL!! :lol: if you take one of the bleed nipples to a local motor factors they will probably be able to match some up for you :)

nice one! :thumbup: easy upgrade but heres a bit of a write up from when I done mine: http://www.300zx.co.uk/forums/showthread.php?t=150484&highlight=brembo+gtr+upgrade

No! On your car be it LOL!! :tt2: I wouldnt do it that way LOL :lol:

LOL! possibly one of the best episodes!! Damn - look at my teeth!! I could open beer bottles with those!

wasnt the 350Z johnboys car too?

wasnt the 350Z johnboys car too?

go for it! sure it will be ok if you are careful! :)

Top end speed is largely determined by the final drive ratio. Most 6 speed boxes will have 5th gear as a 1:1 drive & 6th as an overdrive - just with an additional gear up to 5th for closer ratios. Some do have 2 overdrive gears but mainly its the final drive that will determine this.

Must be somewhere here: http://www.skimmydiscs.co.uk/Find%20a%20lathe2.html Dont think you will be able to do much yourself without potentially buggering up the brake surface LOL!

PMSL - get a wet & dry sanding block out then with a straight edge & do it yourself!!! :lol: :lol:

If you can find somewhere that has an off car lathe then yes - like this: http://www.boschdiagnostics.com/TESTEQUIPMENT/WHEELSERVICE/BRAKELATHES/Pages/BrakeLathes.aspx We have one of these which only does on car: http://www.procuteurope.eu/?gclid=CK69ioSm7q0CFYELfAodg0IO6A The first link is a Bosch unit so may be worth phoning some Bosch service centres. Find a local one here: http://www.boschcarservice.co.uk/