Everything posted by MarkDerby
-
u wont as your missing a bracket m8 .. little Dog leg bracket thats about 2" long
-
g3 is more used for bad paint or peach effect .. g4 is a little nicer just make sure your rotor head speed is Slow
-
the Product you are using is one of the top brands m8 ... i think its down to your rotor speed and pads ... .. g3 and 4 are the ones to use on mop ... g6 top wax should be done by handsome more photos and Video Video Link https://www.facebook.com/photo.php?v=10151379847700264&set=vb.325772450860345&type=2&theateryou did put oil in it right ?i have a decent one for sale ..thought this may interest some of you http://scaleofuniverse.com/NA and UK TT have the same size pulley .. only the Jap spec TT cars have a slightly smaller pulley its nothing to panic aboutlol i had an email bk from them hr or so ago .. asking what the problem and who it was :wink::wink:strange m8 .. i will pm/email them m8i have a spare brake on .. that will do the same job as the clutch OWVall my orders have been fine with cpz ... why what was the muck up ?will dook so when it fell off the jack .... where did the jack end up under the car ?sounds/looks like Air leak/UN-metered air .. check the bungs on the intake pipes where the original recirc was fitted all so i could hear your VTC pulleys rattling all so check the vac lines that run to the boost hard pipes beside the rad .. and the 3 little ones between the pipes on the right side these all supply the Bov/carbon canister ..this is my work connectionDo not pull the needles off the spindle with out holding the spindle with thin nose pliers other wise u will pull out the spindle and **** up your clocks3 of the fuel pipes on the rail have been changed ... so they should be okyeah more so as its turbo .. and the air charge/pressure still needs to be balance on Left to right bankwhat did u do about the balance tube/bar that was on the original plenum ...as you can see at the bottom of rad there are is the oil cooler in/outletsyes at least get some oil in the TQ before fitting to the boxwill get a pic later on .. but yeah it come off a working car
