Everything posted by MarkDerby
-
99 spec rear spoiler fixing position
yes i do ..
-
NA rear bearings same as TT?
i may have some NA bearings around m8 ..
-
Help! found some problems after routing round engine bay
That you will have to investigate as I don't see any reason why they be fused wire on that loom relating to the gear box ...
-
Help! found some problems after routing round engine bay
Post 8 Pic one .. that plug and wire is part of the main Auto harness thats been chopped up and used for the Manual conversion thats been done on your car
-
Help! found some problems after routing round engine bay
Picture 6 is your o2 sensor unpluged .. prob due to not working ...
-
Help! found some problems after routing round engine bay
i would leave it untill your ready to fit an EBC ... as boost will be only upped to 10>12psi at a guess both tubs should be joined together or have the same Mod on both sides
-
Help! found some problems after routing round engine bay
the boost pipes are connected in a way that they bleed off boost so the wast gates open up later .. its another way of doing it .. instead of using a MBC or EBC look at the end pipe u will see it will have a little restriction in it Broken Relay i would take a guess at that something to do with Lights .. Prob HID's Sensor port/blank on the water pipe.. odd one
-
Brake Master Cylinder Upgrade
sounds like air in system or brake master failing ... all so did you bleed both sides of the caliper .. IE Front 1st then back 2nd of the caliper ? and Both bleed nips are at the top ..
-
What did you do to your zed today?
not today but yesterday .. managed to get a spare hour in the workshop from jobs so decided to spend it working on my Zeee powder coated and polly bush just waiting for my arms to turn
-
who has the best?
Me .. haha my car will look all most like the twinz car above little pic
-
Exceedy Hyper twin plate clutch for 300zx
Exceedy Hyper twin plate clutch for 300zx Discs and pressure plate are new with less than 1000 miles All in good order rated for 1100hp £800 .. half the price for all most new clutch
-
What did you do to your zed today?
i dropped of my car interior at the upholster today a nice 350 mile round trip :)
-
JAPSHOW @ SANTAPOD 6th july
Thank you for all that decided it would be good to turn up this year .. was nice meeting you again But im afraid it may be the last one i will arrange due to the poor turn out and support 27 cars booked .. 10 only bothered to turn up shame really as its such a good show .. not just for the car owner but the hole family Hay even got my wife there for the first time and she loved it and shes not in to "Cars" will see what happens for the next show then decided then :( Mark
-
JAPSHOW @ SANTAPOD 6th july
See you all there Mark
-
tryed to get brace cylinder braces made
thats not quite true .. over the past years on here i have done quite a few deals for 300zx drivers at no profit gain what so ever the last one i did just end of last year was the twinz stuff .. over 10 grand worth .. not 1 penny was taken :(
-
A mahoosive thanks to mark derby at automozds
:innocent::thumbup1:
-
Bonnet Heat Shield - remove it ?
beegee vinces car ...
-
A mahoosive thanks to mark derby at automozds
oh by the way .. the bearings swap on this engine was done without removing it .. haha
-
A mahoosive thanks to mark derby at automozds
the only problem with that is im not with in the trade rules to advertise that i own a car garage and do work on Zed's even tho i dont specialize in 300zx car .. but Any High performance car from 80's to modern day it just happens i do work on them and know a fair bit too will have to see what happens see if things change for the better for everyone ... Not the Few :) Mark
-
A mahoosive thanks to mark derby at automozds
there was a few jobs in hand that needed doing .. was lucky that it was decided to do the engine bearings as 2 of the Main ones was to the point wanting to Spin one of them looks to have been standing for long time with contaminated oil as it had Eaten the bearings others was just down to ware and tare Main Rod
-
JAPSHOW @ SANTAPOD 6th july
Ok Lads and Ladetts the show is this weekend coming i have a few more spare stand pass's going so if your wanting to come along for the show please let me know by putting your name down :) as Normal i will be at the Main gate between 8am>9am handing them out so please make sure you are on time for me to give you your stand pass if you are intending to go for the hole weekend i need to have your address to post out the pass for you when you get your pass's you need to FILL it out if you do not they will not let you on the stand Mark See you all there
-
A mahoosive thanks to mark derby at automozds
Glad that I could help m8 ...see you soon with next project Mark
-
Need a new exhaust
wouldnt say new condition ... its an exhaust but has its stainless ... theres no rot and bit of polishing would come up nice im sure
-
Need a new exhaust
new or 2nd hand .. ? i have a Full stainless Blueflame/mongoose system with 5" oval tip ?
-
99'ish spec replica Head Lights
just more pics fitted