HeXaKing

Kris, i wonder who steve is gonna ask to install his next bling item? :-0

you should have seen Ants face when i showed him the 2" hole cutter i was gonna use, "fook me thats a bit big" he said, so i only cut a 19mm hole just big enough to get the sender plug through it.......SPOIL SPORT...:-}

did you chop in your Z for it??????

John, wot you doing going out clubbing ? you suppose to be saving all your dosh for the car, plus you will have a hangover so yo wont be doing much on the blue beast today then.... And dont eat Cucumber before you go to bed it will give you indegestion, dont you ever listen to your mum. Your in Southend m8, i'm sure you could find a curry house or a kebab shop open, your letting us essex lads down m8.......

is 10" on the back the widest you can go without modding the arch ?

I have 20mm on the front of mine, but i also have the high tensile extra long studs, i have noticed that some of the guys with wide arch kits have 120mm spacers. I dont know how long your wheel bearings will last though?? ps, i do like your watch

DONT DO IT, Sheeit, have just seen the time of the post, oh well to late again....

very nice m8, but why did'nt you put the 10" on the back ?

pete you was on the right track m8, they actually make a tool for the job, see attached pic, you can pick them up at most good car spares shop. And dont forget to smear a little copper slip on your new spark plugs thread. Hope you dont have a brittle O'ring under the balance bar and it snaps like mine did? (possibly my thought for playing with it).

Pulsar, the wheels are made by WORK in japan, they are a very lightweight rim and when they first came on the market they were megga expensive, i have just recently sent an email to them, asking the same question about the center caps, ???will keep you informed. The rears on mine are 17"x8"j, but they only weigh 17.5 Kgs with 255, tyres?

xcapade, that dont sound right to me m8, you have to cut the yellow/blue cable and put the converter inline to change the pulse rate to the speedo, were about in middlesex are you ?

PULSAR, does your one have the timing marks on it, cos the one i see on ebay does'nt.

colin must have got confused in the excitment ? and dont no if she was blowing or sucking :-)

Not sure that your one will be the same as mine but this is how i done mine. The yellow/blue wire that you have cut, goes inline with the delimiter ? The cars speedo white plug with the yellow/blue wire comming from it connects to the Blue wire from the delimiter. Then the other half of the yellow/blue wire that goes to the ecu connects to the yellow wire from the delimiter. Then you connect the + and - as per your instructions, on my one there was a grey wire that i did not use. Hope this helps

do you have an Apexi air filter, if you do be very carefull in the rain it sucks it in big time???? exellent choice, Brill front.

Looking at them pins you had sticking out of them shorts, you better go back for second helpings :-)

well there i sat :- 3pm, dick turpin car park full of BMW's having there meet, they all have the wax in the left hand and there polishing cloths in the right....squeak...aqueak..., can't see any Z's, only mine ?. I look in my rear view mirror and spot 8 of them looking at my Z ?,I get out to say hi...and they all walk away.......nuf said..... 3.30pm, Still no Z's, Loads a BMW. 3.44pm, 1 200sx arrives........................Loads of BMW...........still. 4.00pm, Got fed up of waiting, went home......on the way home met AntF in a garage, He's happy as larry co's he had just fitted his new tailgate and high rise spoiler, must say it looks very nice....so now even more fed up co's i ain't got one, now on my fith can of lager........hic....hic. If there was a day that we needed to show the BMW boys who OWN the road it was today sun out...roof off....windows down......you all know the rest..... Thanks for the support

xcapade, to prove a point m8, remove it, and i think all your troubles will go away, thats wot i have done and all seems to be ok at the moment.

Well done m8, you can show me tomorrow if you are comming ?

yup

FILL, got mine from a company on the net that sell conversion kits for imports, ie, speedo's Frequency expanders for radios, and all that sort of stuff. It seemed to work fine for about 3 weeks, but this last week its gone wrong every day? i disconnected it this morning and its been fine all day ? Thinks i will get some UK clocks........Anyone got some they dont want ?

update on speed converter :- After a couple of weeks of it beign installed i have now removed it ? my power steering keeps going heavy and my speedo stops working, but if i stop the car, switch off, wait 5 mins, re start, everything is back to normal, so i have removed the converter to see if it still does it ?. Will keep you informed.

what you need to do is go to HALFORDS and as for "OIL STOPPER" it will stop all your oil leaks ?

zcar, it will work better in my car, i think you should sell it to me ?

will be around at 8pm to pick it up Mac....cant wait.