Everything posted by AndyP
-
You sure it will fit mate? Fooking unlikey
Too many copies of copies etc ! just take a look at the crap fitting of most of the aftermarket front bumpers - terrible ...
-
finally got decent piccy
Nice !
-
maca
Yep, had a test ride in it this evening - it is officially bloody rapid !
-
Over fueling all 6 pots but O/S bank seem worst.
Try what I suggested, blank off the vacuum feed to the fuel damper.
-
Over fueling all 6 pots but O/S bank seem worst.
Take a look at the vacuum pipes on the fuel damper, in fact, blank them off and then test it. It is possible that it's sucking fuel in through it !
-
how to wire a tachometer
Well for these cars there won't be one ! However, there is a tacho/rev signal on one pin from the ECU. Can't remember which off the top of my head though.
-
Over fueling all 6 pots but O/S bank seem worst.
So are you sugegsting the fuel isn't getting there via the injectors ? What if one of the fuel regulator/vacuum pipe things have gone wrong somewhere ? Fuel direct into the plenum, one side would get more due to the small balance bar between the two sides, some may get blown back through the PCV's into the crankcase ... worth thinking about ...
-
Urgent Help Needed!!!!!!!!!!!
T it off the existing sender pipe, which has a much smaller bore. It's under the little rectangular black box in the top LH corner of your picture, beside what looks like your alarm siren.
-
Using a boost leak detector
I agree. Also, one of my (many) boost leaks was so large that virtually no pressure built up until I fixed it.
-
Using a boost leak detector
But that would only matter if both the inlet and exhaust valve were open, right ? I can't remember what the valve overlap is so I'm sure it can be a problem on occasion, but it worked fine for me. Pressuring with a proper compressor make it a lot quicker and easier though ...
-
Custom Alloy Brake Brace ...
All it does is stop the bulkhead flexing as much.
-
300zx.co.uk RSS feeds
Ahhh, it does work - just not through my proxy at work ....
-
hicas and diff oil lights on.
Diff oil shouldn't go anyplace and if it did it would be an obvious leak. Check the wiring ....
-
300zx.co.uk RSS feeds
None of those work when plugged into my RSS Newsreader :( Complains about page syntax errors etc etc
-
300zx.co.uk RSS feeds
Will this work with a standalone RSS client ? (I'm not really up to speed with this stuff yet.)
-
300zx.co.uk RSS feeds
Super cool !
-
Height from floor to wheel arch
Mine is 660mm rear and 665 front. Only difference is that I have 17" wheels, but that will make very little difference to the overal height.
-
Ive just found my old register name !!
I think I can merge the two together if that's what you want.
-
Aerial adaptors?
It's probably for the antenna built into the rear window.
-
Happy Birthday AndyP
Nah, I've not finished growing up yet ! ;)
-
Trolley jack recommendations!
http://www.autoexpress.co.uk/product_test/42999/trolley_jacks_budget.html http://www.autoexpress.co.uk/product_test/43037/trolley_jacks_premium.html
-
Happy Birthday AndyP
Thanks matey. See you over the weekend sometime.
-
Go browsing ....
Doesn't look very secure to me ... ftp://ftp.dennisnet.co.uk/movies/evo/350Z_Doughnut-0404.mov
-
Go browsing ....
Got this link from Autoexpress (becuase they are kind of careless in how they allow people to download stuff!) and started browsing around. ftp://ftp.dennisnet.co.uk/pub/autoexpress/ It seems to cover all the Dennisnet publications and there is all sorts of stuff there from Sid The Sexist videos, to slightly smutty pictures, car vids etc etc Happy hunting ....
-
mods how do i change my username please
Right I'll do it for you .... good luck ...