santa

one..MILLION dollars..mwa ha ha ha ha!

plus gas or something similar

Although it`s a right git to get to, just replaced mine with braided,plenum off at time and was still troublesome due to the lack of flexibility in a short piece of pipe of that nature.You can also do the pipes under the regulators, behind fuel filter and down below the battery there`s another two.

do what i did my missus has been away for nearly a month, fortunately my friend came to stay for a few days, he has an ocd about tidyness..:dance:

the actuator pipe should attach to the bottom of the innermost metal hard boost pipe as you`re facing it, you may have to remove the rubber piping to spot the connection.

that`s a pcv pipe not acc and the blocked off one is a vac pipe?

yeah i`ve had to motivate myself..it`s such a pain in the ass.

No wonder i`m knackered!

me, myself and i, have over the past few 3 weeks, stripped the dash, fixed the peel,refurbed the fan blower,air con unit,replaced matrix with primera one as a preventative measure, fitted replacement clutch booster,pedals were looking a bit rusty so sorted that too. Then i`ve replaced plenum with a shiny one, water bypass, egr removed aiv gone,new matrix pipes,all treated for light corrosion. Fitted new rocker gaskets,painted covers etc.fixed garage shortcuts..naughty naughty! Even replaced det sensor loom,had to make a tool up so i could get to the bloomin plug! Replaced fuel lines with amoured ones..even the ones below the battery. Tonight, finished fitting a new efi loom engine side, cleaned all the connections so they are devoid of the green stuff...thank u wonderwheels.Tomoz dash etc replacment then hope it starts!

and hello back

that`ll be a z31 kit, we have z32`s, you`re looking at a few hundred quid for a decent quality kit

way way better

if you`re into cloth the uk is a nicer material

Happy Birthday Andy

i vant to paint my u hu goooold!

just a thought, if you do the sanding without aftercare/protection on uk calipers they may rust as they`re iron not ally

biggest i`ve seen here are hawk moths can be 2.5-3 inches across

coz it`s soooo groovy here on earth...man, plus words got round about this blingin dust buster that has to be seen to be believed..s`all your fault.

Cos they`re ravers! n pretty sure they think lights are the moon, they`re just nocturnal butterflys.

Will do mate once i get everything back together, the new loom is excellent quality and despite some peoples opinions, has every connection as far as i can see. Gonna get my injectors sonically cleaned if they`re all working ok. got all the stuff to get started now, have removed dash n boxes gotta check matrix but think i`ll replace with a primera as a preventative measure as cash is tight. Got parts coming out me ears!

you can always use the plastic sheeting/membrane used for laying wooden floors.

it`s a company that deals in turbo parts, just google.

they don`t usually stock it, try a local auto parts specialist.

no, he has to take around the corner so he can check on level ground, he should be fine, he`s prob only overfilled by a tiny amount but hard to tell until its somewhere an accurate reading can take place, also found a water leak from the back of the block so he`s not going to run it properly until he can sort that issue out as it looks like one of the little bastads has ruptured as it`s not the matrix pipes although they`re nice n crunchy, poor sod, it`s one thing after another.

think you may need to give your lens a clean mate! Glad to see it`s being sorted.