300_zedx

Not much detail in the ad on this one. Paul

He's only just started to advertise it, so he will chance his arm with the price at the moment. Paul

Sikaflex is the way to go, as Legrath said, then fill any seams with body filler. Paul

From what I can see it all looks very easy to put back to original or update so it's a bit easier on the eye's. Paul

Rear lights are not a problem, can update to 99spec (look in Zcenter)or find some originals at Jefftt's. Paul

Going by the description in the add it sounds good, if you can find out he's address maybe someone from Wales could have a look at it for you. The front seats look like tweed so you should have no problem finding replacments for the rear. Paul

Don't over look this one, interior can be sorted. http://cgi.ebay.co.uk/NISSAN-300-ZX-2-2-BLACK-MINT-CONDTION-LOADS-OF-EXTRAS_W0QQitemZ120453527938QQcmdZViewItemQQptZAutomobiles_UK?hash=item1c0b96f982&_trksid=p3286.c0.m14 Paul

Don't over look this one, I know it has a crap interior but that can be sorted. http://cgi.ebay.co.uk/NISSAN-300-ZX-2-2-BLACK-MINT-CONDTION-LOADS-OF-EXTRAS_W0QQitemZ120453527938QQcmdZViewItemQQptZAutomobiles_UK?hash=item1c0b96f982&_trksid=p3286.c0.m14 Paul

Put an ad in the wanted section for the seat belts, one of the forum traders should be able to help you on the sticker, and welcome to the club. Paul

Welcome Pete, don't live to far from yassa and Daniel if you need some advice. Paul

Grind the caliper jimmy not the wheel.

Yer, maybe next time jimmy. Paul

Would just like to add that I have 8.5 front wheel with 245/40/18 tyre with et30 offset I have no problem with clearance with the caliper but I do get some rubbing on half lock. Paul

The breaker I bought had a con rod through the side. Paul

You don't have to have the tyres. Minus £250.

Looks like these are what car-mad is talking about. http://cgi.ebay.co.uk/18-CRUIZE-SAKURA-ALLOY-WHEELS-NISSAN-300-ZX-TYRES-G_W0QQitemZ350231451180QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET?hash=item518b6bd62c&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A4%7C39%3A1%7C72%3A1689%7C293%3A1%7C294%3A200

Jimmy, why don't you phone them up and ask the dimensions. they should have a spec sheet for them. Paul

No wonder the other one was so noisey, new one sounds great though. Paul

Well if you don't finish it soon we will all come up and kick your arse, :mac1: . Is that incentive enough.:D Looks like your doing great work there mate keep it going. Paul

Don't go any further. you should be able to knock the stud out now, there should be a place behind the hub where the stud will pass out the back of the hub you just need to line it up. Paul

Thanks for the reply znut. Paul

Do you know Why?. Paul

Well I got me new rims fitted today and I have to say what a difference they have made. No more vibration, at any speed, was starting to think that I had a prop shaft problem but it was my old rims, at least three of them have a slight buckle in them, so I will be saving me pennies up to get them sorted. Will post some pictures of me new rims tomorrow as the rain has stopped me taking any today. Paul

Standard pressure for jap spec, front 35.5 psi and rear 32.7 psi converted from the plate on the drivers door which kgf/cm2, 2.5 and 2.3. Paul

Let me know what you need and i'll see what I have in my garage. Paul