General Discussions - 300ZX Related

and i thought you lot were mad... http://300zx.co.uk/200sx/ubb/Forum1/HTML/001566.html

Any of you have pictures of yourself instead of the cars? I think it'd be nice to match the car with the drivers =) I'll post up mine if anyone actually replies lol

Well my first full tankfull made no difference whatsoever to the mpg and no discernible difference to performance - it just cost more and it was a pain to find. I'll continue to use it for about a month just to give it a chance and then decide. Maybe it's just a 'track day' fuel rather than every day. Make a difference to anyone else ? Maybe it only makes a difference for the more highly tuned engines and when they're driven harder than just in daily traffic ? I'll publish my fuel consumption figures sometime soon and you can judge for yourselves. (If anyone wants a copy of my noddy fuel calculating spreadsheet then let me know).

I have the annoying screech when I pull off on a damp start (about 15 to 20 seconds) and I need to get it changed, ASAP! How Much? Where's best to get one from? Can I do the job myself? It it a nightmare to do? About time I tapped into the knowledge on here instead of taking the pi**! All help appreciated! Matty. ------------------ Am gonna be gettin one of those, one day...(sigh) :D

Danny, Can't make today, tried to call your number but it's telling me it's not in use! I have to wait in for the plumber, my hot water pipes burst this morning, not too much damage as I turned the water off and drianed the system right away (I know where the valve is) but I have to wait for the plumber to arrive, friend of the family and he will be here ASAP, but that could be 5 O'clock knowing him. We will have to arrange for another time. Let me know you get this, I will mail you also now! Matty. ------------------ Am gonna be gettin one of those, one day...(sigh) :D

I hope they're kidding 1. Chevrolet Camaro 2. Pontiac Firebird 3. Mercury Cougar 4. Ford Mustang 5. Chevrolet Monte Carlo are my top choices for my personality from that survey, ugh....... they're all domestics AHHHHHHHHHHHHHHHHHHHHHHhh

I'm looking for either a Z32 metal emblem, or a Z32 decal, anyone have any ideas on where I can purchase one? I've found one to say Fairlady Z, but I can't find one that says Z32 hm.............

I feel a bit foolish but when changing my oil today thought check out connector to oil pressure sender for cleandiness etc.Now on a previous zed I changed the seder so no mystey there, except, its not there? spent a good 30 mins and even checked the manual, little pic on page LC-5 shows it screwed into the oil filter assembly...nope not there,did Nissan ever move the location of this? My gauge works albeit not too well so help. Jeff TT

http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAP I.dll?ViewItem&item=595892741&r=0&t=0&showTutorial=0&ed=1002164958&indexURL=0&rd=1 Auction is for 1 pair of our new HD tension rods. These are true Bolt On fully adjustable (on the car) Solid front Tension Rods for all 300ZX Turbo and Non vehicles!! These bolt in place of the factory front lower tension rods (with the rubber bushings that always end up leaking and Usually well worn by now). After installing these youll get dramatic improvements in road feel, and better steering response. These are a major upgrade for any 300Z from 90-96. Another benefit from this item is you can better align…

Picture the scene a damp dull day in Coleshill, as I rise up the hill in my zed a faint banging is audiable , as I pull up a black thing from the blackist lagoon flits across the road SHOCK HORROR !!!!! its , its ,its MATTY the brake man!! his zed all splendid in Brembo brakes and new pads.... before me stood a man with satisfaction on his face,respect Matt,last time I saw someone with hands & face that black he had a sack of coal on his back. Good on ya mate feels good does`nt it. Jeff TT Ps Matt you have mail

Take him out, but watch out for hostages? LMAO! ...

1992 300ZX TT for sale. 57K miles, FULL Japanese service history - looked after by enthusiast (me) here. SS cat free exhaust, Mongoose back boxes, Stillen induction kit and rear wing, vented front panel, Azev 17" wheels (and originals) Kenwood ICE (inc V12 amp). £6500 tel Mark on 016973 51677

Hey Timmyturbo me old z looney congratulations matey, you did it!!! ordered your new stillen!!! welcome to the land of dogs nads and lobsters you are gona love it matey!!!

Have come across a good deal on Castrol Magnetec from a slightly dodgy Nissan dealer £10 for a 4.5 litre can!! if I buy 10 now that is cheap,I changed my oil again today ( Charged me £12 for a single can) as the debate about fully synthetic oil been too thin has had me thinking that maybe a synthetic base oil is more appropriate for the tt engines and as I have done some recent upgrading (JWT Chip,boost etc) I have lots of trade contacts and this is by far the cheapest price on Castrol.The guy told me how they sell it for that price and I was gobsmacked, all I can say is never take any car to a Nissan dealer for an oil change!!. Jeff TT

Jeez guys had a close one today,set the scene,approaching a set of traffic lights im my local town in the left lane with indicator on,Truck in right lane which is a right turn only as i was at the point of left turning the truck swerved across the front of me harrrrd on brakes and tight left turn nearly into the railing on my left, his taillift swipes over the bonnet by about 1 inch!!!SH?T! after composing myself make the left turn and see him going up the road with his right hand indicator flashing!! he did`nt have a clue.Crazy people in a crazy world..except us of course. Jeff TT

One of our members came on the phone to me today to order an exhaust. No problem I say. Next the ole chap wants advice on an induction kit. Blitz / HKS ? I say. Nope I want an induction kit that will give me 20BHP gain over standard. Fuck me I say YOUR HAVING A LAUGH. Nope. "I have been told that this particular induction kit will give me 20bhp gain and can bee backed up by rolling road figures." I don`t want to mention the suppliers of this particular kit. Calibrate the Rolling Road me thinkZ. Upon my reaction to this my customer seemed a little shocked. O.K boyZ tell it like it is lol. CheerZ Johnny

Just a quickie (ooeerrr eerrrrrr) the centre part of the EX/Sys from the 2 cats --->back, is it restrictive?? What are the 2 smooth looking centre boxes anyway, cause I'm thinking of having them fabricated in stainless at my local powerflow Zaust blokey from the cats back ------> to the rear silencers>>>>>>>>>. CheerZZZZ me dears. P.s Is this what JeffTT did last month?? hello JeffTT.

Good to see it back then Craig mate!!! LOL! What happened for the past hour and a half then?

http://network54.com/Hide/Forum/message?forumid=70520&messageid=1001995720 and no i dont think it was an S.E CAR ------------------ BUFF MAN 300ZX SUPER HERO!!!! or is that DUFFMAN????

this is ridiculous ------------------

------------------ BUFF MAN 300ZX SUPER HERO!!!! or is that DUFFMAN???? [This message has been edited by 300z (edited 02-10-2001).]

OK - I'm taking the inlet manifolds off (as many of you know already ), and I'm contemplating getting the injectors ultrasonically cleaned & balanced (I'd upgrade but a) stock turbos so no point, and b) I can't afford a grand on injectors!).. Do people have any preferred places for this? Is it worth risking damaging them getting them out of the fuel rail to get it done? Or just leave well alone? Cheers, Az ------------------ Stage: Rather Ill

http://www.truck-nuts.com/ ------------------ UK 92 TT White(ish) Mongoose K&N AVCR KYB Eibach RLTC

An earlier thread led me to think it might be a laugh to recount those horror stories - but not just the big crashes. Let me start by setting the scene ... Driving along happily about 500 yards from a roundabout at about 40 mph in my Datsun 100A (and, no, that's not the horror story). Wasp flies in the window. With incredible precision I hit him with the back of my hand but don't kill him. Initial problem - one seriously pissed off wasp. Pissed off wasp drops like a stone between my legs. Second problem - one seriously scared Hairsy. Immediate reaction is to stand up. Third problem - I had one foot covering the accelerator and one foot covering th…

Calling all IT boys out there ...! I just updated my McAffee virus definition files and wouldn't you know it, it found an infected file. The file in question, SYSOCMGQ.EXE was allegedly infected with the W32/MAGISTR.DAM3 virus and was "untreatable" and was therefore deleted off my system. Now, when I start the PC up a warning screen pops up saying it can't find this file and if I would be so kind as to change the reference to it in the WIN.INI file. In the file the .exe is referenced to in the [WINDOWS] section and reads: RUN=SYSOCMGQ.EXE. Before I delete this line and could someone tell me what this file is actually used for and if I need to replace it with a clean…