General Discussions - 300ZX Related

Hi Guys, Sadly I have put my Z up for sale. It is a H reg with 72000 on the clock. (Well below Average) The car is mint as I have always parked it in my garage. All electrics work and the engine has been well maintained and runs clean as a whistle. It also has a Clifford CAT 1 Alarm for which I have a cetificate of authenticity. It is maron in colour with rear windows tinted black. (Good if you use your mobile a lot in your car). If anyone is interested I can email pictures of the car. I am looking in the region of £6800 ono. email: pbanwait@talk21.com tel: 07977 022 554 Cheers Pali

I am not too familar with the car and am still learning about it. At the front of the car there is a tube in which you are meant to put in the coolant. Does this mean that I do not have to put coolant into the radiator with the water? What type of coolant/anti-freeze is the best?

Please see the "Bolney" meet thread in the Upcoming Events forum for further details...or visit the Future Meetings forumn at www.evo.co.uk Should be a good day if the rain holds off.

My Z has an ECU remap and a boost upgrade to 1 bar for over a year,last week it started to have detonation at full boost,it does not do it all the time WTF? any ideas cheerZ MAC. ------------------

Sorry, I have changed Lukes site over to another server, but the mail forwarding got messed up. It should work now. If not send mail to zcentre@hotmail.com

Has anyone got an accurate boost gauge for sale? If so, how much?

You may find this amusing as I normally drive my zed with absolute care and respect and don't like to punish it through aggressive driving but... ..and yes, I know some of you have probably done this when you 17 or something or some might say 'so what?', but it was a sh*t load of fun and I survived to tell it!?!. I took a friend of mine out yesterday afternoon (sunday) for a spin around the proverbial 'block' trying to convert him from BMW to a zed. Anyway, on the way back we approached this hump back bridge at a rather 'rapid' pace, thinking 'better slow down a bit', got to the apex of the bridge and yep, she took off. F*cking hell!!, sailed through the air fo…

G*** CLH parked on Parkway in Camden Friday night at 8pm. Burgundy import, after-market alloys. Anyone here?

Anyone tell me what settings they use on a blitz dual SBC to get 15psi. I've got one to fit at the weekend, and thought it might save me some time. Also, what gain setting do you use. Cheers

Ok guys some quick help is needed on these 3 questions if you can: 1) Anybody got car seat covers for their Z? how did you deal with a) The knobs and electrics b) the front seats being able to fold foward? 2) Anybody painted their brake calipers? what sort of paint is best to use? and how many coats etc? 3) Anyone painted the inside trim of their Z? i.e the Centre trim, power window button trim etc? what sort of paint? do you clear coat it? will it look good, withstand heat, scratches etc? btw my Z is: 91 Auto 2+2 NA the seats are starting to wear (grey cloth) so wanna get them covered mid to cheap range covers. Also wanting to do the inside trim with…

I'm looking to purchase or swap my silver UK 300 Twin Turbo for a metallic blue car can anyone help!! My car is a 1990 with leather, 5 speed, cd, standard car!!

Hey all after having taken the plenum off, came accross this at the back near the bulkhead. any ideas what it is? Thanks Latz

bought a '84 Honda CRX. Fast little bugger though. Gotta sell the 300, buy a house, then its all systems go for another 300! So if anyone knows of anyone else after a '90 TT, Grey, lev, 95kKMS import etc... let me know! ....oh and its the faster AUTO version as well!!!! with the oil intercooler to stop it blowin up...

Hey guys after a lot of cussing and swearing and growing back of fingers ,etc, i finally got the engine stripped down in the bay and it is ready to pull out tomorrow. my good friend Afroman is lending me his engine hoist and it should be on the floor before long!!! Bits for it have been ordered (thanks johnny) . I've gone for all TOMI stuff: cam kit solid lifters uprated valve springs forged pistons bearings etc. should be one animal lump!! [This message has been edited by Latz (edited 03-03-2002).]

Don't know if anyone has seen this but some guys on TT net are having a GB on Nismo injectors. The thread is here: http://www.twinturbo.net/cgi-bin/ttnet_viewmsg.pl?forum=general&msg_id=487842 I have spoken to the guy organising it and he is very happy for us lot to jump in on the buy. The prices are stunningly cheap (compared to the prices I've been quoted anyway). Any takers? And for the tech gurus: apparently the fuel rails on the Z changed in August 93. I'll obviously need to specify what type I need (and 740cc are only available on the post 93 fuel rail). Anyway, my question is: how can you tell whether I have the newer fuel rail? My car was made late …

The following was sent to me by e-mail from Poland, from a school time friend who I have just contacted after 20yrs or so (fibber 25!!) enjoy. Jeff TT The Jeep and the sheep. Once upon a time there was a shepherd looking after his sheep on the edge of a deserted road. Suddenly a brand new Jeep Cherokee screeches to a halt next to him. The driver, a young man dressed in a Brioni suite, Cerutti shoes, Ray-Ban sun glasses, Jovial Swiss wrist-watch and a Pierre Cardin tie gets out and asks the shepherd, “If I guess how many sheep you have, will you give me one of them?” The shepherd looks at the young man, then looks at the grazing sheep and replies, “Okay.”…

So is this a dump valve or a factory recirc? Do stock recircs go 'Chissshhhhh' or not. Im confused.

Took off the rear wheels today and checked it oot... the bushes all look in good nick but me shocks are shocking: Would this cause skippy arse out tramping... spose it would.. ah shucks who can recommend a decent set of rear shox and where to get em.. Thanks chapZ Glen

I think I need some new rears LMAO! Balder than Jo Guests pussy FFS!

what a stupid place to put the electric seat buttons i keep knocking mine and they get stuck some times when i get out of the car. they get stuck on and drain my batterie. f**cking buttons.

Contacted 'Cool louves' twice now! no reply. Spare bonnet & cash waiting but there not interested, - maybe its the ali bonnet putting them off. Dunno! Is there anyware else to get custom requirements done? Links & names would be fine....thanks. harve.

I was re-united with my Z today! I wasn't prepared for the spectacle I saw; my first thoughts were- "wow, surely that isn't my car!" Pete (aka LEONARDO) has done an absolutely stunning job on my Z. I strongly urge anyone condsidering getting a kit fitted or having paintwork done, to get on to him, pronto! His website is www.modifiedatpps.co.uk Also a massive thanks for our own Mr Duffman: cheerz for the lift and for putting up with my inane grinning! Pics are to follow..... Dave ps, the stillen gtz-r front is an excellent way of keeping our country clean:- stopping for petrol on the way home I found one of Duffman's fag-butts caught in me mesh!

Hi, anybody have any ideas what this problem might be apart from the head gasket?I do realise it is serious! Murky Rad water Tinny rattle coming from top end of engine Water/ condensation from both exhaust pipes Overheats Cuts out after warmed up Thankyou in advance for your contribution! Mark H [This message has been edited by MarkHanley (edited 04-03-2002).]

Sorry guys submitted to posts by mistake if a forum leader sees this please delete it [This message has been edited by MarkHanley (edited 03-03-2002).]

Changed the oil today! Not rocket science but getting that sodding filter off? Screwdriver as the Macca advised me came in handy! LOL I've got a proper chain wrench but you try getting that on the fucker! LMFAO Anyway, was gonna go to DaveW's car coming out of LEONARDOS today, got to Llandudno Tesco and washed me motor! Fuck me, oil all over the back end which a jet wash just wasn't gonna get off! Right, so come home, get the car up on axle foleys and I've got a thing(really don't know how to descibe this to you guys) below the turbo on passenger side with a pipe. Anyway, pipe has been fucking masking taped at some point(don't start about SE either) to hold …