General Discussions - 300ZX Related

First 300ZX I have seen since buying mine on Monday. White one heading past the speed cameras north of Watchfield last night.

my car is in safety mode i did an ecu check and it came up code 13 coolant temp sensor which i cleaned but car is still the same i also have a prob with the rpm of the car it runs from 800rpm to 1800 sometimes could this be to do with the airflow meter on the side of the left throttle bodie any suggestions???????

Just bought a turbo timer and gonna install it, doesn't seem too difficult just plug into the harness and earth out on body, however my turbo timer has a wire to connect to the hand brake and it recommends for safety. Has anyone experienced this before and is it necessary?

After market back boxes and Facelift spoiler it looked like :cool: ? Coming into Bromley off the A21 at about 22.00.

Pete (TurboZ) and Graham (GrahamS) connected my car upto Datascan the other month and found, that the timing stayed at 25 degrees, even when the car was left running and reached 81 temp. Any ideas what could be causing this? Car is a UK, manual conversion, has Koyo rad and Greddy SMIC. Thanks in advance. Barry

About 9am I think, heading towards Farnborough coming from Baron's Beemers. I was heading the other way and only just caught a glimpse through the metal railings. Looked stock, apart from multi-spoke alloys. Mark

got myself a z last week (at last) a really nice one well will be!!!!! slight set back, didnt pick it up first but have vibration at certain speeds on duals..... up the seat an sounds like wheel bearings but checked that and axle, rods, hicas etc but no joy!! are they a common fault? wots the best price an is it easy enough to do it myself? any suggestions will be great.... adam

Hi Guys As some of you may know i recently accepted the S/E REO's position .. But do to the moral of this forum it doesnt leave me with much enthusiasm to push this club forward .. im fantatical about the Zeds , have owned 2 in the last 6 years , i have met some great guys from here over the past year As some of you were also aware i ran for the NEO's postion, but due to our Chairman who promised the earth then couldnt be bothered to return calls etc i decided against ..which was another factor for cancelling the Convoy i wanted to reorganise the Convoy event .. but does it realy seem worth it i'll be at the meets for a chin wag and a laugh .. but t…

Does anyone know how the pictures for this calendar will be chosen? will it be a case of sending in pictures for someone to choose from, posted online for us all to choose from or picked from pictures already available? Not been online much lately so if this has been discussed or declared already I apologise in advance.

what is the standard disc size on a zed ???

Hi Guys n Gals, Iv'e just bought a new set of rims they have tyres fitted, all 4four are 245/45/18, will these wheels fit on my Z with these tyres? if not what size should i fit........All 4 wheels are 18x8j offset is 38. thanks in advance Jay :dance:

Right with the 300 gone, and the new Skyline now in place, I guess my membership here is now unnecessary!! I would like to say that I'd stick around for the friendship and banter but, to be quite honest, there is nothing left here to enjoy, and without a Z I don't need this forum for anything (except checking replies to this thread and seeing how long it lasts before deletion). I'll always remember the good times and the great mates that I've made here, but I feel this place is very much like a dictatorship now - which I don't want to be associated with. I thought a committee took CARE of it's members, not took CHARGE of them. In all honesty, the deterioration of t…

just bought a 300zx manual non turbo,and im new to the site but i was just wondering what bhp was my car from the factory?and oh yh its a h reg if that makes a difference,cheers guys

Can anyone recommend a good paint shop that does a variety of flip paints based in the UK ? Thanks.

What is the correct sequence when you turn headlights on cos I think mine are suspect? 1 turn - side lights come on, just the ones at the side low down. 2 turn - drivers side sqaure light comes on dim and round one is off passenger side square light on bright and the round one is bright full beam switch - drivers side nothing passenger side square light on full and round light nothing The light near the clocks to tell you that full beam is on (the blue one) comes on dim when turned the knob for full lights? also the blue light goes off when you put full beam on. Now I know this is backwards. I have a UK ca…

does anyone know iff the glass rubber seals are still available new,mainly the inside one that clips to the top of the door card as mine keeps folding back like a foreskin when the window goes down :rolleyes:

i have a clifford alarm system. the siren still goes off but when you unlock/lock the car it doesnt beep any more. i have tried to turn them on using the menu system but its impossible without any audio signal. help!! what have i done wrong

I was wondering if I should get dual-electric fans for my Z32...If anyone has any experienced info or just knowledge that might help, I would appreciate it...

Not me , my car . I was getting the old problem of smoking on tickover and a puff of smoke when pulling away , changed the PCV valves and pipes about six months ago , they were knackered so i thought that might be the problem but no it carried on doing the same :smash: All pointed towards the turbo oil seals :cry: so i bought a pair , had them re-conned , got some decat pipes and a gasket set . Right now here,s the wierd bit Since thrashing round a couple of laps at Bruntingthorpe i noticed the smoking had basically stopped , bit hard to tell unless someone,s following to watch but the sooty build up that used to occur on my n/s tailpipe has got a lot less and…

Evening all I have just bought some AC Autotechinc gauges but I cant for the life of me find the temp and boost senders. I've been on their website but no luck. http://www.acautotechnic.com Does anyone on here have these gauges fitted and know where I can source the senders from. I know Chris@greddy used to but he's no longer trading. Thanks everybody Andrew

any idea where i can find a single 18" Mille Miliga Action wheel to replace my buckled one? Iv tried the usual places and ebay and stuff and cant find them listed anywhere.

Does anyone know how easy or not this procedure is and what exactly is involved? Please help! Rich

Afternoon I've got a Bride subframe designed for an R32 Skyline. Will this fit a Z32 at all, with or without modification? I know it'll fit an S13 with minimal mods. Cheers, Graham

Yes, it was a 350Z GT500 ! Never before seen outside of Japan I think they said .... http://www.channel4.com/4car/gallery/gallery.jsp?id=2380&page=16

Waiting to turn on bitterne road west.... you were stopped at the lights, i was turning into Centurion Business Park.. i smiled and you looked at me like i was a lunatic! :smash: