General Discussions - 300ZX Related

I have just been trying to get the oil pressure gauge to work but can't seem to do so, the diagram shows 4 wires but my cable has 5 and it don't work propperly. Any help would be great.

Hi all, I am venturing under the z tomorrow to see if I can find a reason for my clutch riding (sticky linkage perhaps) before I commit to a clutch change. I wondered if anyone had any top tips of places to check? Cheers Rob :cry:

Touch me! > ;)

got the zed finished at last yippeeeeeee

Is it an easy job to wire my headlights so as the low beam stays on when the main beam is switched on? I could just wire it so it works but would I have to wire any more relays or anything into the circuit? Someone said I would have to use heavier duty wires? Thanks Vini

Very helpful and often overlooked tool, just ordered this one one ebay approx £50 delivered to the UK... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=018&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=280113045195&rd=1,1

Hi mate. Can you get in touch plz! (I'll be on MSN this evening!) Cheers, Rob.

just changed my gear oil to mt-90. makes a huge difference adn the crunching into 4th under load has almost gone altogether. general gear changes are much smoother too. really happy with it now :D

Any ideas on why the import insurance is dearer conidering extra saftey stuff the imports have ie, engine speed limited, boing at speeds to warn drivers, boing when in reverse. Are the cars not the same otherwise really? Cheers, Michael

Has anyone removed the cloth stuff under the bonnet? Think it's for keeping the heat away from the paint work but not sure, mine cloth is a mess and would like to remove it but don't want my paint to come off aswell :nono: . Cheers in advance

Hi - can anyone advise what make and model of speakers fit in the back of 300ZX Fairlady 1991? Mine need replacing. Thx in advance for your help :)

My zed hasnt been driven for a while about a month actually, this was due to a few things, most serious I found was one of the lower arms where the tension rods bolt on was seriously cracked and hence when i took the TR off the bloody thing fell apart ( will post some pics). Any way now, started no probs but noticed water dripping ( not engine coolant) from the front lower edge passenger side wheel arch, its where the front bumper screws into that like plastic pan just underneath the front edge ???? the car hold temperature ok, but thats only idle, havent driven it as shocks are knackered, also got dampness in the passy footwell, i know one of the door seals has a leak, b…

Hi All, Is there anywhere on here or out there that has a list of what is different between the different series 300zx's? I hear people talking about series 1 and 2 and occasionally 4. What are the differences? Cheers, Michael.

I Had New Manifolds And Down Pipes Fitted On My 91 300 Non Turbo But When I Came To Get It From The Garage That Done The Work I Found Pipes Hanging From Under The Car Up Near The Engine Which Were Then Cut Off. I Was Told They Went From The Engine To The Exhausts On Either Side And Now That Their Gone The Car's Been Getting Worse By The Day And It Wont Sit Idle And Keeps Losing Power When Im Driving. After A While It Takes Off But Still Chugs And Spluters Every So Often. Why Is My Baby Not Well And Is It Going To Be Exspensive To Fix? Plz Help Me As Im Going Mad And All Out Of Ideas, Its Up For Mot On Fri Aswell. Cheers Yall.

Hey guys, i have all the bits ready to go in and i was wondering does or has anyone made datascan or something similar a bit more funky i.e made the program look a bit more modern ? thanks

Are these still available and if so from where? Thanks.

Happy Birthday Chap, Hope you have a good day. :duffer: :duffer:

anyone got and set the apexi twin chamber bovs? just fitted mine and the screw is 10mm from the top off the 12mm lock nut and boost response seems lazy is this good or bad? whats best for the turbos? also what size hole is the best setting out of the 3? adam

Has anyone got pictures of a RED zed from the rear end? 99 spec lights with a 99 spec spoiler 99 spec lights with a 94 spec spoiler 99 spec lights with a smooth tailgate skin 99 spec lights with perspex + no spoiler And if i'm being really picky: a SWB red with a standard rear bumper, a tailgate skin and 99 lights. And can everyone please refrain from posting that picture of Stella wih his arse out ! :slap: Thanks Guys.

Reversing out a carpark today , which was fine when i parked it, but a van and a people carrier had me sandwiched in when i got back with my chinese and dvd. Pissing rain, windows fogged up, you know the story. Anyway, i stalled it (auto,even worse!) and a big roar came from a pub behind me where a group of guys were out having a fag and i was giving them great entertainment by my manouvering. "hahaha go on ya big dickhead in you're twin turbo"............i wasn't having a great day so far anyway i rolled down the window, looked back and shouted " what did you say?" They all looked at each other in surprise with big sarcy grins on their faces . I opened the door and went …

I was there this morning around 11-ish. Driving between M4 J15 along the A419 (I think) and the retail place/STEAM museum. A silver ZX was parked on the opposite side of the dual carriageway..... ....anyone? Richard :cool: (Sorry about vague location - I don't know Swindon at all)

Well, after a 1000 mile road trip and 30 hours Im home with my New toy. HUGE THANKS to Paul@SWZ who took me to collect it all the way from Somerset to Glasgow !! Left 1pm Saturday and got home at 7pm Sunday. Just under 1000 miles and did'nt see a single other zed (except a couple of 350z's). Nice to meet Petrolhead, many thanks :) I guess its time to change my Signature and Avatar

http://www.mission-z.jp love the front bumper.

Came off the m1 at j27 on my way back to mansfield and saw a blue 300 on the back of a trailer, i think it had the original back lights but blacked out, no front lights and being towed by a 4x4. Anyones on here?

hey bud think i need your help :hyper: ;) http://www.300zx.co.uk/forums/showthread.php?t=93890