Funkysi

Single exit? You mean dual to quad tips? The only system I'd replace the Veilside system with would be an ABFlug Superior system (they sound almost the same and were built in the same factory) but I'm happy with the VS system. It's subtle sounding and looking.

Looks lovely Gaz! Engine too! Just that radiator Z bracket to replace now with something nicer and it will be spot on! :cool:

I also replaced the window rollers. I'm pretty sure I did the top ones a while ago, but since I was replacing the exterior button bolt for the top roller, I thought I might as well just do the whole lot on both sides. The lower ones are fairly easy to do. The ball inside was lubed using a ball joint grease. These were screwed on using a small dab of thread lock Then came the upper window slider and bolt. My glass is in very good condition, just this bolt and washer that made it look a little untidy. Took the roller off which was easy. Then attacked the screw washer and bolt with this thing and a touch of penetrating fluid on the thread. It did spin and I considered cutting a notch into it, but since the threads were ok, I thought if I kept working it, it would eventually loosen and come off and it did. Little bit of dirt/scale/polish residue here. Polished up using an awesome glass polish called Ceriglass. Always been pleased with the condition of my glass. Hard enough finding blue glass anyway, let alone ones that have virtually no scratches on it. New bolt and washer in - looks so much better. I love little 'detail' jobs like this. ....and eventually the roller. I do have a question for those that have replace this bolt and washer (AndrewG maybe). There is play between the washer edges and the bolt, maybe up to 2mm. There is no way of centralising this. Did you loosen the top bolt on the runner when re-fitting so that the variation doesn't cause any damage to either the roller or worse case, break the glass.....

Some other odds and sods done today in readiness to be refitted. The front of the Z is now in primer (no photos currently) so it won't be too long before it gets its new paint. :) Today I thoroughly cleaned up the drivers' seat since I had the bolster rebuilt and replacement foam. It still needs a vacuum, but it is at least clean now. Did all the plastics too. Seen many Zs with these areas looking a little grotty. Also the rail brackets and underside. These all discolour - now look a little smarter. Happy with this now, it's probably as good as I'll ever get it.

I think I'd cry!!!

True, they rarely have stock of anything Z32 and if your dealership is lazy, they may only want to service your business needs if you have a Micra.

I have a spare set of interior gaitors if anyone wants a set. They are used, but still in reasonable shape, the handbrake gaitor especially. The gear shift gaitor has some wear around the very top which is mostly covered by the stock shift knob. I don't want anything for them, first person to message me their name and address gets them gratis!

Sure thing. I'll call them tomorrow as there are a few more bits I need.

eeeek! Prices are + VAT, still quite a bit cheaper though!

Some interesting pricing comparisons now. Due to the horrendous state of our exchange rate, it appears to be more competitive to buy from Nissan UK for a number of things. Examples on a few parts I am about to order through my local Nissan dealership. 9085345P00 which is the molding on the tailgate (one side) - each side is £34.44 each from local source, $90 each from the US which is around £75 with shipping and tax, this would easily see around £100 a side, which is a saving of 60 a side combined saving of £120. Lead time is fairly long and delivery is likely to be the 8th of next month, but still. The next one offers a great saving. 8083032P01 Right hand door seal @ £96.36 through Nissan dealership - this is ranging from between $140 - $200 depending on source which is between £112 and £160, factor in shipping and you'll likely pay about £150 - £200 a side + tax.....makes every sense to check with Nissan UK first. Quite impressed with the savings that can be had.

Thanks Dave. No, I won't be using those leading edge fixing points. I'll be sealing up the clip holes in the spoiler to prevent water ingress and the spoiler will be bonded on, again to seal it completely. I don't want it blistering in 10 years. :) It will be bolted to the lower edge however where the perspex strip would have gone as the screw holes are present and correct. I believe this to be a fairly new replacement tailgate from Nissan hence it not having any 'pre-drilled' holes and the fact that it is totally rust free - only US 2+2 models and certain 98+ Japanese models came without spoilers and associated holes. If you were to order a new one (obsolete now) from Nissan, it would have come with no holes. This part was never available as a pattern part either. The spoiler fits like a glove so bonding will be fine. Nissan used clips and body tape as a production operation, but this is inherently why the spoilers fail.

Following fitment check the replacement boot, most of the skin has been bare metalled. Just the top section and the screen facing areas to finish.

That's the plan! I'm itching to get it back and can't wait to fit all the new OEM bits and bobs to it. I'm going to see it next week when it should be in the final throws of prep and should have had its glass removed.

Progress is coming along. Looks rather naked here! I think the glass is coming out next week. Doors and bonnet are fully stripped and prepped and awaiting their first coat of primer. The replacement hatch has been fitted and aligned to check for shape. The glass has already been removed from this so it's fairly straight forward. Antenna cover plate has been removed. Just some light reshaping to get the leading edge looking smooth and a proper shape. Missing it dearly, but enjoying the new Merc. :)

Radio 1 is dire, the only show I listened to more recently was John Peel's 'Sessions' show and that finished over a decade ago. More interesting than modern chart music with it's miserable auto-tune lyricists. I only really listen to Radio 2, Jazz FM, Radio 4. There are a couple of other DAB stations that I listen to like 'Planet Rock' and 'Absolute 80s'.

Thanks guys! I took the day off - shame my Z isn't back yet but played around in the new Merc. Weather is glorious!

More pics!! They fit like a glove done they. Well worth the money in my opinion!

About as original as a whore in stilettos. I sent the seller a message.....

I think so, yeah! Not seen or heard from him in a decade! Remember that 30oz steak he had at Sasha's pub!?

You know too! Alic has no idea that it's.Kev: :lol:

Indeed which is why I don't have them.

Up yer bum Simon Lee! Get me my vinyl. :) ;) - - - Updated - - - Yes, I've known Dave for about 13 years.

.....or my tyres you said you'd buy?..... :P The gaiters - I actually got given new OEM ones by a friend. They're currently in at the moment.

Thanks mate, appreciate it! Happy to send the panels up as soon as. :)

You know what, I didn't want to annoy you with something so trivial I guess. Can you see what you can get hold of and I'll happily send up my panels and money!!