leeroy73

Haha :)

Haha!

Damn I was looking forward to a good night as well! Lol

Hi Doing a headlight modification and noticed two of these tablets in each of my lights... Are they some sort of moisture repellant?

I kinda already know I'm not going to like them I was bored and had some carbon wrap left over. :) I'll most likely put them on eBay

I made up these from some old stock lights not sure what they will look like until I put them on

Ok ill re try it thanks guys

Fully sealed mate

Hi everyone Had this problem for a while now just wanted to pick some brains out there. I have this drip which is slowly filling up my passenger footwell as you can see from the picture the drip is appearing from the passenger kick panel to the left of the glove compartment. I've so far removed the glove compartment and the panel to the left and the kick panel check targa drain and also ran a hose off the roof but no leal appears have fitted new nylon window washer so window is tight up against door rubber . And I've also removed the left skuttle panel but still can't find this drip. Any other suggestions chaps?,

Wanted aftermarket oil pressure gauge and lead preferably HKS or greddy

I'm trying to get hold of Sandyz Regarding the interior he/she is selling in classifieds. But hasn't replied since posting really. If anyone knows him please can you mention that I am very interested in the interior. Many thanks chaps!

Yep found them here though $30 for a pair apparently conceptzperformance.com

ok thanks groover, I just emailed mike and MJP and he says they have stopped making - supplying them at Nissan and he can no longer get them......

Thanks for your time mondo. I just wanted one which I could just put back on without any messing about. Cheers groover

Ok great. As long as the plastics and that are in good condition. Not to worried about the floc

Seat belts on doors mondo

Hi all Need some help here .. went to fix my window slider bolt problem today and found its the actual nylon washer that's worn as when I click it back in it pops back out when it's push fully up against the Targa. So I need a new pair of nylon washers. Any idea where to buy them? During this process some woman decided to reverse over my door card buckling it , and breaking the plastic air vent, and now has chips all out of it where it scraped along the pavement :( so I need a passenger door card anyone? I also need one of these. As mine is badly worn and split. Many thanks

just looked again and as I peeled the rubber apart to have a look the black nylon roller is just loose in there it seems the window bolt has somehow been pushed off it. ( like a ball and socket joint) im wondering if this can be pushed back or will I have to remove the window?

Thanks for the input guys. This bolt that goes through the window I found a post on here ages ago via Jeff. Saying remove the top seat belt bolt and then remove the plastic cover and there's apparenty a black bit of tape covering a hole. Behind that there's a 10mm nut apparently just above the seat belt hole. ....... This has only happened since I fitted the new metal door lock mechanism part

.my window seems to have come away from the rubber strip and not fully touching the Targa seal due to this bolt being very loose any idea how to tighten it chaps?

Hi. Thought I'd change the rad coolant as the water was rusty and had bits in. I also put some summer antifreeze as well. I'm not entirely sure I've done it correctly so I thought I'd post on here just to be sure. I undone one of the lower pipes going to the rad underneath the car and let the water drain out. Also I left the rad cap off . I then ran a hose through the pipe and rad to remove any crap then I tightened the lower pipe and 'refilled with 50% antifreeze and water. I Just wondering if I've done it correctly? Should I check the water for a couple of days?

Ahh. Ok. So do i fill via rad cap until it gets to the top?

Lol. Ok

Sorted it! Thanks buddy! Another thing .just went to top up the cars rad water and assuming the filler is on the the right side.... Pulled the stick and it was totally dry. Never checked this beforr and the card never once overheated. So I put some water in and after a while it's just coming out from underneath the car?? Is there some kinda overflow? I checked the rad cap and saw no signs of water either