Everything posted by boldy
-
Zero to drowned and then to completely wiped out in approx 1 minute and 47 seconds.
Greedy Sod !! :d :d
-
Lambo Type rear lights
There were just over £230 but that was on a group buy price , in all i had to buy 6 reverse lights and 2 red tail lamps cos they have the fittings for stop and tail bulbs . i just swapped the lenses . The indicators are nice and bright using amber bulbs but don,t use chromed bulbs THERE CRAP . The fog light is a red stop and tail bulb ( supplied by Luke )if you file one of the pips off it will fit a single filliament bulb holder and once in both filliaments light up to give a nice bright red fog light :hyper: Now the fun part,again using red bulbs in the tail lamps , as the bulbs are 21w for brake light and only 5w for tail lights, the brakes are fine but the tail lights were way too dim so i fitted red led,s around the edge of the reflector , slightly angled inwards to shine red light into the reflector , giving a nice bright tail lamp :bow: and they pass the MOT ok after fitting a couple of stick on reflectors on the bumper :hyper: I don,t know why i,m telling you all this as i,m the only one in the world with this set up :headvswal :headvswal I like to be different :D :D Go for it , you know ya wanna !!! Some pics
-
My Mrs is leaving me...
:rofl: :rofl: :rofl: :rofl:
-
Bonnet Hinges for the "Front" Bonnet!
You don,t need a powerful strut as the bonnets only aluminium, we tried a few different ones to get a smooth lift, too strong and it nearly wacks you in the chin ! also too long and the bonnet goes too high and strains the hinges . We found a tailgate strut off a Renault Megane is ideal . If your looking for strut which is adjustable , i believe R.S Componants do a range of struts with a bleed screw in them , you basically bleed gas out of them until you get to your required strength of lift , but let too much out and your buggered , you have to get some more and start again. Mantav8 did a write up on how to fit the stut on a zed , i believe its in the tuning section under bodywork.HTH :D
-
Does anybody know of any exhaust that sounds like the one on this webpage
:slap: :tongue: :tongue:
-
Mids xmas meeting
Now that sounds like FUN !! :hyper: :confused:
-
Lambo Type rear lights
:bow: :bow: :bow: :bow: Ahmen to that !!
-
Calendar cover pic.
This one of Chris,s motor with the marquee,s not bad , pity about the ugly folk spoiling it !! :rofl: :rofl: :rofl:
-
Dash cluster lighting
Is Is it a turbo , iv,e just had mine apart to fit lumiglows and didn,t see any bulbs facing towards the clocks , maybe NA,s are different if thats what you have :confused: :confused: :confused:
-
oil temp & pressure gauges
The easiest way is to fit a sandwhich plate between the oil filter and housing,Chris at Get Greddy can supply Greddy ones, dead easy to fit , it has three take off points but depending on which make of guages you are using , you might have to get the holes re-tapped to match the threads of the sender units, i did, mine are Autometer Guages.HTH :D
-
Does anybody know of any exhaust that sounds like the one on this webpage
The Blue flame one with 6" by 4" ovel tips sounds very much like that, has a nice deep sound to it. HTH :hyper:
-
Hello everyone new fella here
Welcome to the nut house , hope you find what your after :hyper: :hyper:
-
rachel mcadams....what do you think?
IF SHE PLAYS HER CARDS RIGHT , SHE COULD HAVE ME TONIGHT !! :rofl:
-
Dash cluster lighting
The bulbs behind the clocks iluminate the needles and the boost and iol pressure guages , you should have seen a clear plastic moulding behind both main clocks, this refracts (ooh big word :rofl: ) the light to the needles and smaller guages HTH :D
-
where can i get...
They are the Blitz ones , ive got em on mine ,there not alloy , there steel and i,ll be taking mine off in a few weeks (i,m having a set of Smithys pipes modded to take the dump valves) only the pipes will be available as i,m re-using the dump valves. Drop me a pm if your interested :D :D
-
in need of exhaust gasket
Any good exhaust centre should keep a stock of gaskets in , there are after market ones of the same size available , iv,e got em on mine :hyper: HTH
-
How cool is Your car?
89 and it said i have GAY tail lights :cry: :cry: WTFdo they know :rant:
-
maybe a new 300zx TT driver soon
Go on ,..do it ..do it..you know ya wanna !! :hyper: :hyper: Oh yeah and welcome to the nut house :D :D :D
-
A Few More Shots..
Hello and thanks :hyper: :hyper: :hyper: :hyper:
-
A Few More Shots..
Ayup Vince , i got em off Vijay ,give him a pm he might have a few sets left. :hyper: :hyper: :bow:
-
Gran Canaria
Just got back from Gran Canaria , last sunday , but we stopped at Playa deL Inglis , about 15 mins away from P.C .The friends we went with have been to P.C , they reckon its loud , a bit scruffy and full of cockroaches!!!. The whole island has a strange arrangment for its nightlife , 80% of its in the shopping centres :confused: but we had a great time even though the closest centre to us is called the YUMBO CENTRE and its were all the gay people go :x: :x:. Got to say Playa del Inglis is the cleanest place i,ve ever stopped , not a piece of litter anywere . :bow: :bow: I,m sure you,ll have a great time, the drinks are big and the nights long :duffer: :dance: :nana2: :duffer: :hurl:
-
Finally Fitted Em .....
Yeah but how many people are daft enough to post it on a public forum. :D :D :D
-
And To Cap It All....
I found my MOT ran out whilst on my hols :headvswal :headvswal went for a test and.... IT SAILED THROUGH .!! :nana2: :nana2: :nana2: :nana2:
-
Finally Fitted Em .....
THAT DIDN,T TAKE LONG !! Funny thing is i didn,t realise until i drove to the garage and even then it took me a mo to work out what was going on :headvswal :headvswal HOW THICK AM I ! :D :rofl:
- A Few More Shots..