antf

Hello, Is there a link showing how to drain the coolent and then refill as i am going to attempt this tomorrow but would rather the expert knowledge from you guys before i attempt it. I have bout 5 litres of coolent is this enough/too much and how much water do i add to it??? Thanks in advance for your help. Ant :confused:

Excellent thanks very much :bow: :bow:

Hello all, Does anyone know the diameter of the main air pipepipe that i have to block off when fitting my dump valves as i need to get a cap of some sort to block these off. Thanks in advance Anthony

Phil I have these fitted to my car not this actual style but from the same seller. I have been nothing but pleased with them, had to get them fitted by my mechanic though as needed welding and different brackets. Sound wise they have a nice deep tone and a nice burble on idle. Go for it mine cost in total including postage and fitting around £140 so couldnt argue with that. Hope this helps Ant :p

Wez, Looks like they will arrive monday (fingers crossed) as the tracking on the net shows they cleared british customs on friday, hopefully fit same day and will let you know what there like, just hope they dont make the car stall. Have you got a direct email so i can let you know sooner rather than posting on the site. Thanks Ant

Can someone tell me when the essex meets are and where (if any) as i missed the last one at chafford hundred. :( Thanks Ant

It doesnt say make, i think they are this guys own type he does three models. I ordered them on Monday and they were sent on Tuesday I paid $41.75 for the 3 - 5 days tracking postage so hopefully be here tomorrow if not monday, i paid £130 overall in total.

Got them from ebay.com just type in 300zx blow off and they should pop up the are blue and are for buy it now at $189.99 the seller is Progear2000. Hope this helps. Ant :slap:

Looked at your site - excellent and very helpful thanks, specialy like your vinyl exactly the same as mine that i have just finished ;) Got mine from Romford too. Just asking, as from your site you say you have the consult, is there any chance we could meet up and test mine as i'd like to know if i have any probs, obviously i'll sort you out. Thanks again Ant :duffer: :duffer: :duffer: :duffer: and so on!!

Excellent thanks, are these type of BOV's ok?

Not sure of the make but this is the description: two Stage II Adjustable Blow Off valve with Adapters for the 90-96 Nissan 300ZX Twin Turbo , again included are two Aluminum Adapters for direct fitment into existing Hoses that currently hold your Factory Compressor Bypass Valve located under Air Filter Box. No welding required, simply direct replacement so no headaches for installation.BOV's are made of Aluminum CNC Machined, they have Brass Pistons and are of very high quality. Havent received them yet as they are being sent from america only cost £130 including postage for 2 and fitting kits. Bargain. :hyper:

Be careful when using that glue as i started of using that and as soon as you put it back in the car and the heat gets to it the bits that wrap around the back start to peel, i redid the edges of my first panels with evo stick impact to make sure they are stuck completely.

Sorry i re read it and it wasnt clear, the vague instructions i have is that you have to block off one of the pipes?? Thanks Ant

Hello, Finally decided to buy some dump valves with fitting kit supposed to be a straight swap apart from pipes being blocked? and am just wondering if there are any sites on how to fit as i am a novice on these as i have never used before. Thanks again. Ant :confused:

Finally all finished with white piping on the doors overall about 14 hours labour, pretty pleased with the outcome especially being my first time. I have taken some pictures but do not know how to attach them, can someone please help so i can upload the pics. Thanks :confused:

Yeah but there recirculating i wouldnt mind paying around £150 for the noise just not £400 any one have some for sale?? Cheers Ant

Sure does think i have spent about 8 hours so far in total!! I am going to leave the rear panels as just about had enough so once i get the drivers door done tomorrow i am going to leave it alone. not sure on any protection i have made a few marks where the glue got on the front never mind. cheers ant :hyper:

Hello, You may or may not have noticed that i put my z up for sale but have decided to keep it now as really cant part with it, have almost finished retriming the interior panels, looks great and in the past couple of months i have had the rear boxes changed and a stillen induction kit. Any ideas on what i should get next as i really want to start to play with it now but without spending to much money (probably not possible) i would like to put dump valves but really dont fancy spending 400 notes just for a noise dont suppose there are cheapers ones about? Also when are there any essex meets as i missed the one today partly do to with my interior panels being out of the car. Thanks all Ant :)

Cheers almost done, really pleased just hope it holds. You'll be suprised how nice it looks, i didnt think any other colour would go as i still have the original cloth seats, its not plain grey its got like leathery print to it so its light and dark if you get what i mean :D

Its going alright almost gave up yesterday, i have done all the console panels and dash panels (glovebox, under wheel) which seem to have gone well looks 100% better. But attempted the passenger door what a b@gger to get the old trim off and to make matters worse i ran out of glue so i used another can that i bought but werent to keen on now i know why thing wouldnt stick anything apart from my bloody fingers!!! Got some glue today evo stick impact - excellent top of the door a bit messy so i am going to get some white piping tomorrow to run round the top which will hide the mistakes and hopefully look nice. thanks again for all your help, ill hopfully take some pics tomorrow once i finish the drivers door. Getting there :rolleyes:

I only removed the bottom tray 4 push in plastice thingys!! then undone the 2 bolts at the bottom and a little twist and out it came!! How did you remove the side panels that run along the cenre console?? going to attempt them tomorrow.

Rob I have a gunmetal grey TT so I have gone for a grey vinyl so far so good and looks the biz, i'll hopefully put up some pics tomorrow so far only done the armrest and glovebox as these are the easiest to remove. I just bought 2 metres of vinyl from a shop in Romford for £6.50 a metre and some spray vinyl adhesive from B&Q. CC300ZX: Managed the 350 miles as I went away for the weekend so it was a 250 mile round trip on the motorways cruising at approx 80mph I was really chuffed. Cant believe it myself. :D

Thanks all, i hopefully will be able to start on the rest of the panels tomorrow thanks to your guides. back to ironing the old tweed to get it flat so i can use them as templates on the vinyl, thanks again :D

Excellent thanks both, Thats the door cards sorted anyone help with the bits running along the centre panel and the glove box or am i just being stupid and this is simple??? Thanks again :D