vijay

prop p/n's - http://www.300zx.lv/catalog/?gr=F&sec=370 and have a look here for the other p/n - http://www.300zx.lv/catalog/?gr=F&PHPSESSID=ebc6106a71881b1332cb93fa1a781657 rear main seal - 12279-0M300 Vijay

yep, totally agree, get a can of contact cleaner and get cleaning with every connector you can get to :) Vijay

when you've got zero boost you will know about it, the Z turns into a real lard arse with no go :( Vijay

if your're looking for normal white dials, then I think Luke at the Z Centre is your man :) Vijay

or possibly a loose coilpack connector. Vijay

thought it was Mike at MJP. Vijay

yep, it's all about the fitting. I've got one of these toad alarms on my other car and the fitter was recomended by a friend. Well he didn't bother fittting certain switches which I ended up doing myself. Why not see if Bob will be down your way at any point :) Vijay

Thanks Anita, got it this morning :) Vijay

Hi Lynette, Give Ken a call on 01277-811799 or 07751-149211 for older model Z parts. He's Mike's mate who supplies the parts :) Vijay

http://www.300zx.co.uk/forums/showthread.php?t=17474&highlight=rev Vijay

http://www.ttzd.com/tech/oilchangetech.html on the drivers side. It's really worth learning how to do the basics yourself if you have the time. Most Nissan garages don't seem to have any knowledge in 300's and charge you for the benefit Vijay

yep, the speedo will be calibrated wrong if only to 160, did you get them from the US? Vijay

did you pull the needles? Vijay

err, turbo technics breather kit - I think you need to do a search as I remember them causing major problems :( Vijay

Mike Feeney sells them, around the £110 I think - 01277-374201. Vijay

will do mate, Saturday lunchtime sounds better ;) Vijay

Just thought I'd let you know that Costco are doing a nice 7 piece long nose plier set including all the angles ones for just over £9. That's a really good price considering I paid £23 for a set of 3. Vijay

found this: http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=880107 http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=795922 Vijay

How's this? Vijay

Hi Alex, I've got a conzult and we can sort out the front indicators :) Vijay

and check the coilpack connections :) Vijay

Hi Kenny, Have you checked the pins on the auto ecu as described in that second link? Vijay

Hi Kenny, I would do an main ecu diag to confirm - http://www.ttzd.com/tech/diagnostictech.html And here's the throttle sensor circuit check from the manual - http://www.300zx.co.uk/cgi-bin/manual.cgi?list=at&dir=&config=&refresh=&direction=forward&scale=0&cycle=off&slide=53&design=default&total=194 Vijay

Chris, Have you mailed Z1 for their opinion? usually very helpful :) Vijay

I thinke the equivalent on an auto is the parking brake switch. pin 13 - http://www.300zx.co.uk/cgi-bin/manual.cgi?list=st&dir=&config=&refresh=&direction=forward&scale=0&cycle=off&slide=67&design=default&total=98