j1mmytt

But they should balance out through all the pipework, ah i duno, i just hope it warms up 2mow so i can have a look.... everything keeps freezing up lol

I installed the ebc myself the hoses must have been mixed up while the motor was out no big deal..... Im sure il sort it out, problem is the ebc still does work, i can control boost from base level which is 11psi to 16-17 psi....

yeah i wanted my actuators set to 15psi so they would give me a base of about 13 but nevermind, Maybe one of the hoses is mixed up and only one turbos is being affected by the ebc.... im hoping lol

Il have to do this soon cheers mate, the ebc still effects the outcome, if i set all parameters to 0 it will only boost at 11psi...... does that mean anything?

those BKR9EIX iridiums are heat range 9 though,they are well over what i would need lol ive got the BKR7EIX 7's.

Yeah its not right is it, doesnt seem like a boost leak..... i did check roughly and all seemed ok, unless something has broken like the ebc solenoid? the boost does change with the ebc settings but vary slightly, not very sensitive if that makes sense. hmmmmm if all the pipework is correct what else could it be?

Ive had 19psi before, but now i can only get what ive said above, Really doint fancy trying to adjust the actuators while engine is in doh.

Not too sure mate, suppose the bovs will sound better without the recircs? maybe your getting the best of both words... your getting a your desired noise and also the benifits of recirculation, i think when replacing the recircs with bov's the engine runs rich when coming off boost which isnt so good. The only reason i want bov's is due to the recirc valves being worn and sending pressure back to the turbos or whatever it is that happens....., now that i have bigger turbos i think they are holding me back, it wont boost past 17psi even with the ebc set to 100% im narrowing down all the possibilites, might need to adjust the actuators to open a bit later.... the base is about 11psi.... i was hoping for about 13 but never mind. any suggestions?

There was a time when people knew this kinda stuff :( ah well....

I think they might be as follows.... top intake pipe which needs to be bunged up, 32mm Lower pipe which plumbs onto the bov, 28mm.. can anyone confirm this?

I need the OD size of the top pipe where the bung should go when fitting bov's in place of the recirc valves, obviously i want to buy a rubber bung to fit over the top of it. Yes i cant be bothered to measure it myself.. too cold.... I also need the OD size of the lower rubber pipe that comes from the intercooler pipe that goes onto the bottom of the stock recirc. not the actual metal pipe size as im reusing the stock rubber hose.... Thanks guys.

got ya :)

yeah thats it, thats all i was trying to say. :) simple eh. that combined with air guide ducting will be great.

im also thinking bout some fins on the insides of the wheels to generate some cool air to the surface of the disc.... i believe the stock nissan wheels had these...

Thats perfect, if you can get hold of some of these they will be perfect, infact maybe i can pick up a set of used ones? But you must have the lower arm with the threaded hole to fit them.... only one of mine has lol as ive replaced one or the other a few times lol

ok il try get some measurements but i cant promise anything not with all the snow we are having at the mo :(.

no need to be heat ttreated, they wont come in contact with anything hot. the rest sounds good.

yeah save yaself a bundle too ;)

zedcentre but i made the rear diffuser myself one of a kind :)

weight a ton and look pants. proper ricer thing to do, if u wanna make friends here youl make the right choice lol.

yeah sev, he lives in enfield just up the road from me, stocky guy ;)

ok heres what the brackets look like, you just gota make a plate to direct the air towards the brakes, thats the best pic i could find

:( there are plenty of nice rides :)

lol il have a look now..... shhhhhhhh

Im not the person to ask, ive never used them, if you do go for that setup make sure you make a good cold air feed system, thats something i should have done ages ago, silly me.