groover

Actually had a closer look at the climate pod, the washer symbol is out too, are your plugs in properly/fully on both pods? Hazard is not lit either.

You may have lifted the leg of the leds off the track, when putting it back together, very sensitive the track around the bulb holder. You have lost the blue led on the cold arrow, again, check the legs on the track.

It will read in KPH, its to do with the resistor on the speedo board

Also where the belt goes back into the door, you will need a little cut out there too and use the jap plastic cover bezel.

You might have to shave a bit of metal off the speaker holder in the door, or the other option is to do away with the holder bracket altogether and make your own baffle.

You will need to cut out the card at the bottom for the anchor point entry and also will need the Jap top cover. If you have your J spec door card, make a little template out of cardboard, measure and place it over the UK door card and cut with a stanley or dremel. You can then use the plastic cover to go over the hole.

6.5 inch (165mm), depth isnt a problem.

Part if the centre console, bottom bit is on the side just before the hand brake

Yes mate, Uk clocks in a J spec, will eliminate the need for a convertor and the odometer will also read in miles, will not be able to use the whole dash in a series 4 as the connectors are different, but the speedo dial and board should be ok.

:winkiss:

Pics added!

:happybday: All the best :happybday:

:happybday: have a great day :happybday:

Goes to show its technique and all in the mind over strength and size.

Very clever stuff, always admire a pro. He makes it look so easy lol

Lol i cant believe how he is sat down, like a little human lol

Any time mate, i take it blue is the colour :whistling: Im pleased i didnt rush mine to paint, as im getting a few splits and cracks here and there in some of the kit, going to have to grind them out and put some flexible filler in, especially the rear light panel, it obviously twists a bit where its joined to the metal.:mad2:

About bloody time you did an update, i was getting withdrawl symptoms :thumbup: Looking sweet, cant wait to see it all together.:yes:

:happybday: All the best Craig :happybday:

:happybday: Have a great day :happybday:

I blanked mine off totally, but you need link both sets of trees. Creating the loop Ie you have 4x small pipe outlets 2 at the top and bottom of each pipe to the matrix, link the top to the top and bottom to the bottom , so all you are left with is the 2 main pipe outlets to the heater matrix.

This might help http://www.woodlands-junior.kent.sch.uk/customs/questions/moneyold.htm

Im gonna telly Mikey Bean you said that :biggrin:

LOL, i know this is going to sound really sad, but when i was 17 and had a yellow capri, i used some spare furry seat covers and did exactly that to it :yes: I though it was cool at the time:biggrin:

AndyP deals with all the payments, im sure once its verified you will be turned green.