Munny975

Lookinh good matey! If you are taking SAT NAV on your trip make sure you go through Luxumbourg (beautiful) and when you get back into South of France tell it to avoid Highways and you will be stunned!!! From East Anglia to Monaco Straight with around 4pit stops took us 11hours!! So you will have plenty of time!! Nice Zed tooo ;)

Astro-turf shoes are the best! Good for grip, Super comfy and last longer than any other trainers i ever had! on my 2nd pair in 5years! And i still have my 1st pair as they are still good lol!! Usually on discount as JJB (Chav palace i know) so i got both of mine for 20quid each!

Where have you been then??? Enjoying some Sunny weather i hope :)

Well i just had a browse through his feedback, Most recent was complaint about Engine Management light on but as its an import they may not have known this! Other 1 was listed as Spares and Repairs and guy was pissed it wasn't driveable... Obviously!! And final guy said it looked a state but we cant tell! So with 228/231 being happy with what they got i don't know why you see them in such a Negative light! Far worse traders out there lol!! His cars do all state 1years MOT,6months tax and 6MONTHS WARRANTY so if your friend does have any probs make sure he has a contract about the warranty and they cant argue. Also states OUR SHOWROOM IN BIRMINGHAM WE ARE ONLY TEN MINUTES AWAY FROM BIRMINGHAM AIRPORT in all the Ads so will be somewhere close! lol! Got a long way to travel from South Central Area so he better be sure :) Hope this helps you and your friend Munny

Im here :)

I helped my friend rebuild his Garrett T3 was not overly difficult just very fiddely and had to mark where each Seal and bearing came from! Took around 3hours (1hour for the blimen housing lol) Make sure you get he 360degree thrust bearing it does help with Quicker Spool up :) Just remember to send your shaft off to be Balenced (40-50quid) and check it 1st to make sure it is ok as AET Turbos wanted to scrap it and make us buy a new one even though it was fine and has worked perfectly!! So just tell them no and to balence it anyways :) So yeah i would definatly go for it :) Munny

Stage 1 will most likely be Accommodating mods such as New intake, Higher Boost, Decat, Stock Injectors! Not your SETUP! Will be pumping more Fuel through but you will probably have the same problem as you do at the moment! (May get a start but as stated will run like s**t) Getting a closer matched ECU will be better if somebody has one mapped for 555cc injectors at least will be better! Probably will be wasting your time with a Stage 1 ECU. Could always get a Custom Management such as Megasquirt (around 300quid) which is fully mappable! Its not a piggyback system it is a fully customisable system (IE you can do Injector pulse, Ignition Timing/Advance, Custom Fuel Tables, Launch Control, Rev Limiter ETC) The list is endless! Whack it on the Rollers with JD and he will have a field day mapping it so its totally custom to you :) An Ebay Link of one Also have their own Dedicated Forums - Forums Link Just a thought ;) Munny

Some people just naturally FAIL AT LIFE!!! Its a shame really! But as we watch and laugh it brings joy to our lives knowing that its not as pathetic as theirs :) LMAO!! *No Offence Incured!*

could always go for a contrast as in White wheels on Black car!!! *Awaiting Slap* lol Or just freshen them up with some Silver/ grey!

:hurl::hurl::hurl::hurl::hurl::hurl:love the tooth pie :hurl::hurl::hurl::hurl:

Been a busy little bee today! Had a nice drive in the sun for abit, and then did around 6hours of modelling!! Here is where i stand!! (The wheels i had previously made for another car and felt they suited so that saves me a few hours on modelling new wheels) Feel free to comment :) Front Arch Adjusted to Fit wheel and Began on the Windscreen and Roof Modelled Behind Rear Arch and Finished Roof Rear Arch Completed 3/4 Front View 3/4 Rear View of Rear Arch and Arse After an Hour of Tweaking anf Fine tuning + Door Window Full Car From Behind (Dont ask what happened to the roof lol) Top View to be compared to Original Concept Drawing in Picture 2 Tomorrow should be sorting out the roof then will probably start with modelling the front Headlights, and grill (not texturing till last) then The Rear Details and might whack an Exhaust on Enjoy Munny

Lots of newspapers and Glossy Spray paint with a warm place to store them will be fine :) Few coats then some lacquer and you'll be laughing at transforming your wheels for 30quid!!!

loads of Corsa's with the 2.0 calibra engine in them (straight swap) which can be Turbo'd eaily but the without turbo you still looking at 150hp in a car weighing around 1tonne! TT Zed power to weight is around 200hp per tonne! Look on forums such as Migweb its done there all the time!

Howdy folks im fed up with doing my Uni work so i thought i would post what i have done for all of you guys to see :) 1stly i had to write a Research paper on Concept Cars and how it can be linked to games (Harder than i thought as research was minimal) so that was a good 10,500 words for that!! Then for my 'Project' im modelling a 3d Concept Car that i have designed myself. So 1st my drawings FRONT + REAR OF MY CAR (ROOFING WONT BE SO ROUNDED OR ALIEN LIKE) TOP AND SIDE (SHOWING AEROPLANE ELEMENTS AS INSPIRATION) 3/4 SHOT AND GULLWING DOOR WITH AGGRESIVE FRONT 1ST STAGE OF 3D MODEL BEGINNING WITH DOOR FRONT ARCH IN PLACE (NEEDS MORE ROUNDING I KNOW) FRONT AND SIDE AFTER 3HOURS OF MODELLING! This so far has taken me 3-4hours and once the back end is done i will begin putting in the detail in the doors, front etc. so hopefully tomorrow i will have some good fresh updates for you all! Im hoping to have this entire model completed (may do interior i have 1 made but its sh*t) by the end of the 17th of April (7days doing it in total) So daily updates should be available! For level of detail at the moment! To measure the unit is by the amount of Squares (polygons) the car is made out of and Gran Turismo 5 each car is around 250,000 polygons in detail!! My car at the moment stand at 8,000 when mirrored across and made into a whole car. So i have about 30x more polygons that i can use :) :) Have fun and enjoy :) Munny

stillen splitter and some tints :)

when i broke down in Slovenia (Yes Slovenia) after trying to explain where i was (no road signs for miles) had to give them Landmarks they got to me within 1hour and we grabbed loads of small rocks put them at the foot of his ramp to make the car abit higher so it wouldnt scrape!Did it when coming off as well all Good :) They usually have bits of wood for the same idea! Just a shame his english wasnt very good was sooo difficult trying to explain to him what was wrong as pointing and hand gestures werent working lol

from watching it i established it was between FnF2 and Tokyo Drift in the timeline! I was going nuts when i saw Han (Jap guy with the Veilside Rx7 who DIED in Tokyo Drift) until i realised it was before 3, and it was after number 2 as he was a copper again after his work for them in FnF2

Just saw this on my couch :p Was a cool film good mix of cars and action. I didnt see the Zed either and paid uber attention to the night race :( oh well :( Blimen Skylines again boo!!! Love how they used so many quotes from the 1st one too! love the 'Shut up' to the GPS instead of his lappie (1st film) lol

woah woah woah!!! Do you people really have jobs???? I thought money fell out of the sky and into your lap :p :p :p Only Kidding! Its a Disgrace!! I was taught to pay your own way for everything! Couldnt afford it cant have it simple! Benefits is such horses**t (no offence) if it is removed nobody can exploit it! Yes i know some people need it but by now im Sure more people exploit it than actually need it!

Lower it Rb26 it and your well on your way :) :) Nice 1!

Ignore This Post!

if your doing alot of motorway miles i would steer from Clios as they will be revving their tits off past 85mph!! i would suggest a Vectra B they are cheap as chips pick up a decent 2001 reg for less than 1500quid no problem with under 100k EBAY EXAMPLE When i had mine Town driving easy 35mpg and motorway could max at over 50mpg! And that was with a 2.0 petrol, plus maintenance is a peace of piss and parts can be found anywhere for cheap too! Hope this may help!!

Twist and wiggle the Jack in the headphone slot! i have similar probs on my Lappie and i put it flat on the back of the screen (Screen facing up) and it is all good! lol give it a try!

What an expression! lol

Repost lol