The rebuild has finally started today and so far in a few hours I've managed to completely strip the interior.

 

 

 

Next job on my list is to get both the bumpers, tailgate and bonnet off.

 

After that i'll work on the body panels and stripping down the engine.

A video of the horn - not me shitting my pants :)

 

 

Wiring up my two news horns and as they need a separate 12v feed I've setup a relay to trigger them from the main horn feed.

 

For some reason the relay didn't work so while I was under the car sorting it out I decided to test the horns directly and put the

12v feed on the horns.

 

Bad idea !

 

I royally shit my pants under the zed as it was so damn loud :)

 

I'll try sort the feed properly and post of video of it.

Looking so clean Lee and can we have both videos please :biggrin:

If your into that kind of shit :)

 

Looking so clean Lee and can we have both videos please :biggrin:

If your into that kind of shit :)

 

I bet it made you jump out of your skin lol

That is SOOO clean, love it:clap:

Wiring up my two news horns and as they need a separate 12v feed I've setup a relay to trigger them from the main horn feed.

 

For some reason the relay didn't work so while I was under the car sorting it out I decided to test the horns directly and put the

12v feed on the horns.

 

Bad idea !

 

I royally shit my pants under the zed as it was so damn loud :)

 

I'll try sort the feed properly and post of video of it.

 

Nice to see it in the final stages.

 

How come you didn't just wire the horns to the existing harness? Have you fitted air horns or something?

Wiring it this way as its suggested in the instructions as best for purpose.

 

Not that I read instructions often but running two parallel I didn't want to overload old cable.

Few shots of my horn system :

 

 

[video=youtube_share;GGJF4w7a37E]

Edited August 27, 20187 yr by JaiKai

A little tour so far - never mind the dust on the paint, needs a good clean again.

 

[video=youtube_share;LiilvAjzuLg]

Isn’t the horn supposed to be loud? :rofl:

It is, very upsetting as the video uploaded with my phone dulls it right down.

 

 

Isn’t the horn supposed to be loud? :rofl:

When you bought your blue replacement for the purple beast, you probably had one of the cleanest cars in the club. Then you thought, hmmm, this could do with cleaning up a bit [emoji848]

 

Now you probably have one of the cleanest cars in the world! I think you need to build a wall of glass around that!

Inspirational! :cool:

coming along nicely Lee

New Injectors have arrived, can you guess what they are ?

 

New Injectors have arrived, can you guess what they are ?

 

[ATTACH=CONFIG]114221[/ATTACH]

 

Nismo 740's ??:innocent:

Engine build finally started.

 

While I wait for the engine to be built I've started doing the more tedious jobs.

 

Like fitting the alarm.

 

Its a toad ai606, but I've purchased different microwave sensors so that I can build the sensors into the a-pillers.

 

First I drilled a pilot hole then gradually used a larger and larger drill bit until I got to a suitable size for the sensor to fit snug.

 

At the back I dabbed the cable and sensor in hot glue to keep the cable from snagging or pulling on the sensor.

 

 

This give it a very natural fit and when put back in place you wouldn't even know it was there.

 

 

Edited September 18, 20187 yr by JaiKai

Looks like a factory fit Lee :thumbup1:

Thanks Gary for closing my thread. :yes:

Nice touch Lee [emoji41]

Very nicely done.

Just about to start on the driver side sensor.

 

Need to extend the cable down under the dash and over to the ecu area.