Right, Noel (Turbonoz) has had my car for the last week and has set it up properly. He's installed some colder plugs, fixed a couple of boost leaks and a small fuel leak, produced a new custom map and setup my Profec B spec II. Many thanks to him for his patience and professionalism

 

So, any guesses? :) Relevant spec is as follows...

 

UK 1993 Nissan 300ZX Twin Turbo

Manual 5 Speed box

Donor TT block (from a UK auto)

GT600R Turbo Kit

NISMO 555 Injectors

A'pexi Twin Induction (single MAF)

A'pexi BOVs

SGP Lightened Underdrive Pulley

New PCV Valves and Hoses

New Injector Connectors

New Coilpack Connectors

Koyo Racing Radiator

Smithy SS Fuel Line Kit

Greddy Side Mount Intercoolers

AIVs Removed

Carbon Canister Removed

RPS Twin turbo MAX Street Clutch

RPS Aluminum Flywheel

Edge Racing Stainless Steel Testpipes (2.4")

Mike Smith Manifolds

New Detonation Sensor

EGR Elimination Kit

Ramey Z 300ZX Heavy Duty Idler Studs

Z1 Ultimate VG30DETT rebuild kit

Cometic head gasket

Z1 "5 bolt" Stainless Steel Downpipes

New PCV system kit

New O2 sensors

Temporary straight through exhaust (cats removed)

Greddy Profec B Spec II boost controller

 

Last tested on stock tubs and injectors:

304.9 rwhp @ 5394rpm

313.5 lb/ft @ 4796rpm

 

 

So please guess away - be interested in what you think it comes back with...

 

CheersZ

 

Steve :)

 

Edit: closest guess earns some rep and a pint :D

Edited June 6, 201312 yr by cybernet

That's the one Lee - I need to update my garage at some point with spec and pics..

 

Nice one. Was wondering who's car it was. Would ave been nice to see you there

595.... :huh:

584 I recon :)

He's doing mine on the 17th June but I only have stock internals but everything else.

My guess is you'll reach 600bhp :wink:.

 

Interested in this, what tubs you got? I think im going to go for 525's

blimey, I think eveyone has seen a few other recent dyno's and now getting abit carried away with their guesses!

blimey, I think eveyone has seen a few other recent dyno's and now getting abit carried away with their guesses!

 

Possibly, however nick made just shy of 600 on smaller tubs last week didn't he so...Although didn't you say you already know?

Interested in this, what tubs you got?

 

I have new GSP600's, check out my spec list for other mods, can't wait myself to get to and talk to Noz to see what I've got :yes:.

I have new GSP600's, check out my spec list for other mods, can't wait myself to get to and talk to Noz to see what I've got :yes:.

 

Oh right not heard anything about those, the sport 500's or 525's look pretty god for the bucks.

Possibly, however nick made just shy of 600 on smaller tubs last week didn't he so...Although didn't you say you already know?

 

I do already know yes, but again people are not understanding what let's the Zed make serious power.

 

Nick's made good power for 2 reasons, 2.5 IC piping and 3" downpipes & exhaust ...

and 48P heads ;)

 

Im going to say 558 and just over 500 lbs ft torque

I do already know yes, but again people are not understanding what let's the Zed make serious power.

 

Nick's made good power for 2 reasons, 2.5 IC piping and 3" downpipes & exhaust ...

 

I see, im all ears for learning :D still intrigued as to the number though.

These threads are such a bad idea :wack:

 

Every set up behaves & responds differently :)

Nick's made good power for 2 reasons, 2.5 IC piping and 3" downpipes & exhaust ...

 

I was gonna say that

These threads are such a bad idea :wack:

 

Every set up behaves & responds differently :)

 

I love threads like these :)

 

Make your mind up bud! :D In the words of Rob Brydon, "it's just a bit of fun" ;)

 

Will be flying back to the UK tomorrow and will text you when I'm on my way..

 

CheerZ

 

Steve :)

Ok then 389 bhp and 420 lb tq is that reserved enough lol

Thanks Gaz :D

Make your mind up bud! :D In the words of Rob Brydon, "it's just a bit of fun" ;)

 

Will be flying back to the UK tomorrow and will text you when I'm on my way..

 

CheerZ

 

Steve :)

 

Haha, I was being sarcastic with the "I love these threads" comment :D

 

See you soon :)

I'll guess 480bhp and 475lb/ft

 

-Andrew

Results are in - collected the car from Noel on Wednesday night and drove home to South London in the driving rain. She ran well however, much smoother than before, but I obviously didn't push her in the wet..

 

520.7 BHP and 505.9 lb/ft

 

Not far from what I was expecting, so I'm pretty pleased. More than anything I'm just glad that I can drive her with confidence again :D

 

Thanks again to Noel for his excellent work :bow:

 

CheerZ

 

Steve :)

Results are in - collected the car from Noel on Wednesday night and drove home to South London in the driving rain. She ran well however, much smoother than before, but I obviously didn't push her in the wet..

 

520.7 BHP and 505.9 lb/ft

 

Not far from what I was expecting, so I'm pretty pleased. More than anything I'm just glad that I can drive her with confidence again :D

 

Thanks again to Noel for his excellent work :bow:

 

CheerZ

 

Steve :)

results are in - collected the car from noel on wednesday night and drove home to south london in the driving rain. She ran well however, much smoother than before, but i obviously didn't push her in the wet..

 

520.7 bhp and 505.9 lb/ft

 

not far from what i was expecting, so i'm pretty pleased. More than anything i'm just glad that i can drive her with confidence again :d

 

thanks again to noel for his excellent work :bow:

 

Cheerz

 

steve :)

 

nioce

results are in - collected the car from noel on wednesday night and drove home to south london in the driving rain. She ran well however, much smoother than before, but i obviously didn't push her in the wet..

 

520.7 bhp and 505.9 lb/ft

 

not far from what i was expecting, so i'm pretty pleased. More than anything i'm just glad that i can drive her with confidence again :d

 

thanks again to noel for his excellent work :bow:

 

Cheerz

 

steve :)

 

nioce

You have been a busy boy, Steve. I say 525.

That makes Shahid the winner by my count - nice guess bud! Rep to you and I owe you a drink :)

You have been a busy boy, Steve. I say 525.

That makes Shahid the winner by my count - nice guess bud! Rep to you and I owe you a drink :)

Results are in - collected the car from Noel on Wednesday night and drove home to South London in the driving rain. She ran well however, much smoother than before, but I obviously didn't push her in the wet..

 

520.7 BHP and 505.9 lb/ft

 

Not far from what I was expecting, so I'm pretty pleased. More than anything I'm just glad that I can drive her with confidence again :D

 

Thanks again to Noel for his excellent work :bow:

 

CheerZ

 

Steve :)

 

To have on or beyond 500 ponies with over 500 pound/ft must make for a great Z experience:thumbup1: