General Discussions - 300ZX Related

johnny have you got the offsets for the blitz wheels yet???

Hey guys, I'm considering getting an ALC fitted to my import TT but would like to know how any of you have experienced the difference in shift-performance. Also, is £240 too much for a new one? I thought I saw one advertised on here (many moons ago) for about £90?! Let me know pleaZe. Cheers, Danny

Hi guys, Fitted the new dampers-ok-, but where on earth do you possition the electric motors ??? Motors work fine in turning the 90 degrees required, and fit on the bracketry fine but you can adjust the damper shaft & motor shaft. Im conserned in case 1's going stiff as the other going soft. (doors open there, but how else can I explain it) UK car all std (new) bits. cheers harve

I'm going that way in a couple of weeks and wondered who is up that way, maybe for a beer? [This message has been edited by Jez (edited 26-09-2001).]

What are the dimensions of a brake pad, and disc combined into one large rubberised condom?

My laptop has NT loaded. It s a bunch of cr*p. I want to reload windows 98. I do not have administrator rights for NT (at least I can't remember the password). How do I do it?

Anyone got front disc's for my 90TT, the one's on it are warped. C

Been looking around for a tech doc on removing the upper & lower inlet plenums (ok manifolds.. whatever!) and I can't seem to find one.. Don't suppose anyone has a link do they? Cheers! Az ------------------ Yes.. I know my back wheels *were* on backwards.. They're not now, 'k? ;)

My head light bulb went last night and the Nissan garage couldn't help due to my car being an import. I was going to order 1 but I really needed to use the car so we went to Halfords. Purchased bulb 453 (has the spade terminal on a wire) and soldered another terminal to it. It took about 3 mins to do and cost around £4 and it works fine. Just thought I would mention it as I looked on some previous topics on this and it seemed that some poeple had problems doing it.

My friendly police constable wrote to me this morning wanting to know my details for an intended prosecution of EXCESS SPEED (well fancy that?) in a variable 60mph zone on the M25 at 22.34 near colnbrook. My beef is that the M25 was freeflowing with only light traffic (it's 10.30 at night) . absolutely no reason for any speed restriction to be in place. After previous similar nights, same time, same place, same restriction, same absence of traffic, I ignored it. Can I require the police to provide just cause why the restriction was in place. Or prove that the system was not a) faulty b) being tested c) left on to catch motorists and make even more money for the …

Hello, I'm tying to find a heater core for a 300ZX year 85 to 89. I found this one in the states: http://www.heatercore4u.com/2-558.htm but I would prefere to locate on closer to London. BTW, I don't own any 300ZX I just need that heater core for a watercooled computer.

You have mail. Jeff TT

How much and who would fit it.... ....help.... Matty. ------------------ Am gonna be gettin one of those, one day...(sigh) :D

I might start another group buy on Brembo fronts brembo rears EBC GREENSTUFF OR REDSTUFF PADS Anyone interested?

I've posted before but on the first Sunday of October it is the Guildford cruize. I will post a map on this site nearer the time for all those wanting to meet up so we can have a chat before hand. All are welcome and I hope it will be a good night. I would also be happy to see the guy with the mitsi 450hp if he can get a note to have time off school. All interested post and I will arrange all. Tim PS. need to fit a boost controller if anyone is in the Surrey area and would like to lend a hand.

Hi all Im looking for a good mechanic who knows the 300Z in the London or surrounding areas. I understand that Darren is the best, however have tried to contact him for a couple of days wihout any joy...(I think it will be easier to get hold of Bin Ladin!!!) Any suggestions as my Z has become a death trap and im too young to die ) CheerZ

[This message has been edited by Timmy_Turbo (edited 25-10-2001).]

[This message has been edited by Timmy_Turbo (edited 25-10-2001).]

Is there any way to pep up my Z. It is standard bar the Mongoose exhaust. It doesnt seem as fast as it used to, or it might be me getting used to the power. I am planning on a induction kit soon. When will I get to meet you guyZ? I need to go in another Z cos mine is the only one I have been in so I dont know if my Z is down on the power, due to its age and milage. I would love to goto the dyno meet but its too far for me. Stuart

Just a quick note for anyone who's been following my "something wrong..." thread over the previous weeks: Thanks to the masterful yet modest hands of Vijay, my current troubles are over! After cleaning the coil packs and anything that looked remotely like an electrical connector my hesi/misfire/rough idle are gone - this is the job a main dealer was asking £900 quid for... :O Many thanks too to Maciej and Henri who also diag'd the problem, and to Andy, Danny, Aaron, Timmy T and all you other fine gents who offered info and suggestions. This place makes me feel all warm and fuzzy sometimes One final puzzler: after sorting out the contacts, Vijay kindly di…

[This message has been edited by Timmy_Turbo (edited 25-10-2001).]

It's a quote from Pulp Fiction before anyone asks.. And if you have to ask... Where have you been the last 5 years!? Anyway.. I'm talking about my mobile scrap-heap of a car in this case.. Which blew a water hose off the back of the engine (at least thats where the steam was coming from.. you try seeing down there!) while I was doing err.. 70 (100) on the M40 I *think* the HG is OK - the temp never hit the top of the gauge, and I pulled over and stopped (and let it piss the rest of the brown muddy water over the hard shoulder ).. Then had to wait 4 hours to get a flatbed (AA) truck that was low enough to get the Z onto to take me home (Slough)... …

A guy came to look at my Z and informed me that my propshaft is on it's way out..... ....any idea's on cost and who does it? Basically the guy ripped my Z apart, even told me my electric mirrors were struggling....WTF... £7k for a UK TT boosted to 340bhp Z, with SH....and receipts, any offers? Matty. ------------------ Am gonna be gettin one of those, one day...(sigh) :D

Looks =& sounds like a lot of tuning work's gone into this one, can't see it in the rides section. Is it anyone here ? Black, tinted rear lights, after market alloys, dump valves as well I think for the noise in the bromley traffic - think he was having a bit of fun !

code 34 has appeared since I cleaned my throttle bodies. On reading previous posts it seems it could be the connector, wiring can anyone tell me what the connector looks like & where it is??. By the way I checked it when fully warm & I'm sure it's not gone into saftey boost still boosting past the last mark but one???.. cheerZZZZZ Jon..