ChrisC

Here's a pic of a really nice Scooby! ;) I used to love them but you see them everywhere :D :D :D Chris.

It could be if you have strange genitals :D

Must be the latest way for Essex girls to find a man! ;)

A general computer term for a "plug in gadget"

I've got one for a bargain price off Anders UK so lets hope the engine damage thing is untrue! I PM'd you back mate.

If my engine is out then should be a quick job if I get a puller? Depends how much the belts are going to cost. Everything I look at sounds cheap until you add all the belts, gaskets, tools etc LOL

http://www.ttzd.com/tech/pulleytech.html Some people think they may cause longterm engine damage but there doesn't seem to be much evidence and a lot of people use them. Unorthodox Racing are probably the best known maker of them but more expensive: http://www.unorthodoxracing.com

I'm thinking of getting an ASP underdrive pulley. Are they easy to fit? Anyone got one and know if it uses the standard belts? Seen them for $99 and for about 18bhp on a stock Z, more on a modded one it seems pretty good. http://www.aspracing.com

First date: Pick her up in the Z, lean out the window and say: "My cock is even bigger than my car baby!" :D Always works for me... LOL

LOL me too! Mine was in bits at the bodyshop and it fell off. I thought it would turn up in all the junk but no such luck! Anyone know if Nissan can supply them or is it a whole new control pod required?

Click search at the top right. To get the cluster off you just undo the 2 screws that hold the top cover over the dials. The screws are under the lid that sticks out over the steering wheel. There are 2 more holding the dials steady that will now be visible. You might be able to sort it from there if you have small hands/can see what's wrong. Only takes 2 minutes to do. To get the whole lot out you need to take the pods off that have the aircon and fog buttons on etc. The fronts are screwed on from underneath and a couple of screws inside the pods at the back.

So where do I get a pair of PE1420's from? I've tried a few searches and only seem to find the manufacturer in Japan. Do they have any dealers?

Clever barsteward! :D :D :D

I think the way I'm going to go is to get my new engine in with the big turbo's on, then in a few months time I can easily put the injectors and dual intake on for some serious fun.

So what turbo's should I be looking at that are capable of 600bhp? Been looking at GT25's and PE1420's Any others that are a bit more friendly on the already pissed off bank manager? :D

Z Centre do good gear but I'd get it fitted by Peter at PPS http://www.modifiedatpps.co.uk/ Peter can also get some of the same stuff cheaper.

Are they the Daytona model? I was looking at those myself. Did you get the subframes to mount them on for that price? Does it say how much they weigh? How much does a standard Z leather seat weigh? A lot!

It's OK mate I know how these things can take time... Anyway my Z won't be moving for a few months so they are only for advertising the site from the drive ;)

I'm getting a new engine and manual box put in my Z and want to get some serious power at the same time. What level of boost will I be running to get 500bhp? How high can you go on stock internals? 550 ish I've heard? Which turbos? Like the look of GT25's or PE1420's? Nismo 555's? Dual intake with single MAF and modded chip? Which chip? Which plugs? Had some HKS ones in but suspect they will be in a bad way if it's been detting a lot? I presume I'll need dump valves and metal hard pipes. What else will I be needing? I've got big intercoolers, single Blitz SUS intake, full stainless decat zorst, Blitz boost controller. As I'll be needing a gasket set anyway is it cheaper to buy forged pistons and rods and rebuild my old engine instead of spending cash on a new one? My current engine has probable head gasket failure, rear oil leak and sounds like a con-rod broke.

Oh don't ask about that! I can't find all the cheques after moving my office. Will have to have another search for the envelope full of 'em that my other half kindly "moved" Would get this sorted out my own cash but can't spare a grand +

Give her a hug from me mate :(

Does anyone know of any driving lights that will fit where the fog lights go? I'm sure it will be easy to mount them if I can just find some of the right size. Does anyone know the sizes of the stock fog lights? My Z is away at the moment.

Don't know how these have been posted but when you open the page it asks you to download a file. Download it and rename it to a .jpg extension.

When you cut the leather round the door handle opening, make sure you have the handle in place as the hole in the door card is much longer than the handle. Me and a couple of other people who have done this ended up with a gap at the side of the handle! Not good after all the effort!

Yeah but if they did that they would have to pay and these wankers are not that considerate! Why do these things always have to happen at the worst time? You wouldn't mind if it happened the week before it went in for a respray!