Everything posted by Joel1993
-
Sticking when cold..
I would start with the basics... fuel filter, fuel pump relay maybe?
-
possible PTU problem?
Forgot to mention aswell. A bit ago now once cleaning all the connectors of the ptu etc. Was running fine then started running on 5 for no reason. Then started idle hunting going from 900rpm to 1500rpm then to 600 rpm and so on. Until I stopped, checked all connectors... They were fine. I turned it off and back on. Ran a bit rough but came to 6 cylinders eventually and ran alright but missing from there
-
possible PTU problem?
That's cool. I like that aha. Update... changed all of the injector cables now. Still missing however :(
-
possible PTU problem?
Thankyou medallion man :) 6 ps? Don't get it? I have changed all of the coil pack connectors... 5 of 6 injector cables. Cleaned ptu cables and cas cable plus the maf. Any cable I could find I have cleaned... I may have missed one or two but also is there any common cables that might go towards engine missing?
-
possible PTU problem?
Going on for a bit this. Is it possible for it to be the injectors or one of them loosing a bit of resistance? Just wanna narrow it down a bit
-
brake help
Yeah will get a picture up tomorrow mate :)
-
Best location for adjustable fuel pressure regulator
Hey buddy on mine I have a cloth over the battery and I have the regulator sat on top of that... doesn't look professional really but it is practical :)
-
brake help
Ah alright mate thankyou and no I think they are silver
-
brake help
Found something on ebay... my disks are 324mm I believe. Drilled also... 350z front drilled disks are 324mm aswell so I may have the conversion on my car? Anyways. Would any 324mm fit or will they have to be brembo?
-
brake help
New disks but will put new pads on at same time
-
brake help
Me again :/ Noticed my front brembos need changing as they have worn right down and it's started high pitch squeeling. Tried to find some but I can't aha. Only the full kits for sale I'm sure they are 320mm anyone any ideas? Thankyou
-
possible PTU problem?
Oh right cheers for that mate. Might have a look when I am next off aha
-
possible PTU problem?
Yeah I have cleaned a lot of the connectors that may be a cause and it still idles rough and misses slightly
-
possible PTU problem?
Yeah thankyou. Was just looking at some as I am gonna get one with a sub harness. So damn expensive
-
possible PTU problem?
Hey guys. I know I ask for a lot of help aha but I just swapped a injector connecter to a new one and it wouldn't start. I also cleaned some other connectors such as the one on the timing belt cover... I secured it all then tried it and it was turning over but never fired. I jiggled the connecter around and eventually it fired on 5 cylinders. The one that wasn't was the one at the back on the right. Managed to get it on 6 after a while but sometimes drops to 5 for 3 seconds then goes to 6. At idle before this it misfires, roughish idle. But drives fine in the higher rpm. I know I ask a lot aha
-
power steering
Right no worries... why do we use auto transfer fluid anyway other than ps fluid.. The power steering fluid has got that dextron III and II in it now a days
-
power steering
Ah no worries thankyou buddy... cars falling apart XD
-
power steering
Hey guys. Got a real wierd smell earlier of an old workshop in the car. Looked like power steering fluid had leaked everywhere. Just a question... I know the clutch is hydraulic but is it from the power steering? If so it would make a lot of sense aha as my power steering has been going with the leek and I have had clutch pedal problems
-
Red Z project.
Wired up my reverse lights so I have a fog light at the flick of a switch. Looks brighter in person :)
-
Red Z project.
Today I have changed it kmh to mph with one of those converters you wire in. Followed a guide on here and must admit very good guide. Sorted :)
-
clutch pedal question
Brilliant guys thankyou and yeah its a stock clutch line I do believe :)
-
clutch pedal question
Hey guys Just a query like when I first start the car up and dip the clutch etc it feels strong... The bite is half way let's say when the car has warmed up the pedal feels like it goes further up, the bite is at the top and when pedal goes near the floor it feels spongy any ideas? Air in the system? Cheers :)
-
Mainbeams on half brightness with headlights?
I had this problem. Turned out to be a blown fuse. Happy days :)
-
power steering hose
Hey guys. My power steering pump is cover in fluid and when I looked the hose has loads of cracks in the top of it. Hicas light also come on :( cheers
-
Red Z project.
Good info there guys thankyou Received car back today, new clutch. A 4 paddle clutch. I like the harshness of them. Make the car feel strong as anything. Can't wait to bed it in properly :)