radron

Thanks buddy

First post buddy

bracket was pretty badly bent

Dont think so

Welcome mate

Pics attached guys and gals

Ah!?? My gearbox was swapped out a few months ago. And my car was previously an auto to manual conversion. I wonder if they forgot to connect something up? I'm guessing that if I dont get any current at the fuse box then its likely the switch? or wiring from the switch to the fuse box?

wow good job mate!

Hey guys Reverse lights have stopped working?? I have checked the bulbs and the fuse all looks fine. Any ideas? Cheers Ron

Cunning! :-)

How do you get a torque wrench behind that top one?

awesome thanks mate

Hi mate is that the same for the rear traction arms

Hey guys The people at longlife told me that 2 and 3/4 was as big as you would want to go on the zorst and 3 inch on the down pipes. for the same reasons.

Hey all I have recieved my new camber and traction arms. Can anyone give me a quick heads up of how hard they are to change? Anything I need to be careful of? what torque settings if any etc? Thanks guys might have a go tomorrow if I can find the time.

Hey mate blue flame are huge in the bike world. They make nice stailess kit. Good quality and good prices.

Hi mate I did this myself and I am no engineer or mechanic. I took the dash out which was abig job but as the guys say, you can take out the glove box and open the cover in the passenger footwell and you will see the ecu. Take out the ac blower which is behind the glove box and you will see where the loom enters the firewall. You will need to disconnect the ac pipes that go through the firewall to remove the ac matrix. Once you have done this put take the old loom off the ecu, push it through into the engine bay and then push the new one back ini its place. I then replaced each connector with the identical connector on the new loom until I had made it to the front of the engine and there were none left to connect. It took me all weekend but it was not very difficult just time consuming. HTH

Defo smooth matey I can highly reccomend it!!

235 will go nice on 8's

Yep I'll take some pics when I get a chance to swap them

http://www.driftworks.com/catalog/products/tein-tie-rods-and-ends-nissan-fitment.html

nope :D Saw a cool advert for some tein tie rods and ends though!

Hey guys I spent ages trying to figure out what the third connectro does but the manual is pretty thin on info. All I can tell you is that mine is an auto conversion and it has no third connector attached and it works just dandy. HTH

Hey guys I have a manual conversion with an auto loom. but a manula loom would have done just fine. The third connector by the fuse box is not needed once converted. Will work just fine IMHO

Hey mate i'm selling my old ones in the for sale section if your interested. They are twin round chrome jobbies