cybernet

BTT - I'm fairly sure that this will be ok, but a second opinion would be much appreciated ;) Steve :)

Have had the car off the road for 2 weeks now fitting my BOVS and I've had to abandon the job whilst I order some silicone hose :rolleyes: Not sure if anyone would have done this before, but would there be any problem running one BOV and one original recirc for a week or so until I can finish the job properly? CheerZ Steve :)

FFS - I give up! I have cut the bracket off the driver's side pipe but the angle of the BOV means that the vacuum pipe on the tip is pressed hard up against my 99 spec front mesh :rolleyes: I think the only way to get it installed properly will be to buy some 30mm silicone hose from somewhere (Smithy?). Meanwhile, I'm going to put it all back together and run one BOV and one recirc. Shouldn't cause any problems as they are independent... Steve :)

Nice one Rich! Let me know if you need any help from the South East bud! Steve :)

Looks great Mike - top work and great attention to detail :bow: Steve :)

DelCMOS is a boot sector virus so will be memory resident as soon as the machine starts from the hard disk. There are some removal instructions here. You basically have to to create a clean boot disk and then recreate a clean master boot record. HTH Steve :)

lol - good work fellas! Will take another gander tonight. Many thanks Steve :)

lol - assume we are both talking about the black cylinder thingy? If so it's a good job I didn't take the fooker off last night :rofl: Looks like I don't need the CC Removal Article then ;) CheerZ Steve :)

Thanks Eric! Please see pic below. The pipes I have been supplied protrude almost exactly to the electical connection on the side of the CC. I can't see any other way of fitting the DS valve :confused: Steve :)

I'm having to remove my carbon canister so I can get my A'pexi BOVS plumbed in properly :rolleyes: I've found the TwinTurbo.net article but the hosting for the pics doesn't seem to be working. Does anyone know of any other tech docs for this or have any of their own pics? Even a print of the original article would be great! Any help or advice appreciated! CheerZ Steve :) * EDIT * Has anyone done this without removing the front bumper? :rolleyes:

lol - that's a black one and it sits on my drive! Belongs to my brother-in-law ;) Steve :)

Another grey one! They're getting as common as black Zeds round here ;) Steve :)

Yay!! :rofl: Sounds like an idea Dave. Haven't checked where Rochford is yet, but I'd probably be up for it.. Steve :)

lol - thanks Richard. I was thinking of cutting off the bracket, but like you I was worried about it fitting once I'd done that! Will take a look tomorrow bud! Steve :)

*****cks - I've almost finished but have one problem :rolleyes: Passenger side fits in fine, driver's side has a number of what look like aircon pipes and a black cannister in the way (see pic). Don't think it's gonna go in here :( MarkZX or Sideways300 - did you have this problem on your TTs and if so what exactly did you do to get around it? Any advice appreciated as always! CheerZ Steve :)

Nice one fellas :smash: Steve :)

Vijay, if you don't want to go the wireless route there is a fair bit of info here HTH Steve :)

I ran my UK TT on unleaded until I changed to a more aggressive chip. Since then have run only on Optimax. Would recommend it regardless of N/A vs TT as my fuel economy has improved tremendously. I'm sure the extra cost is saved by the extra miles at the end of the day. HTH Steve :)

lol - what about Ka$h? ;) Steve :)

Really sorry to hear about this Tim. Thoughts are with you and her family bud :( Steve

Could do Karlos! Will put this forward as a March meeting and see who is interested. Are you coming to the Lakeside meet on 13th Feb? Steve :)

lol - see the link in Vijay's post above bud :slap: Steve :)

Yes, you have :tongue:

lol - bunch of bastids :nono: Steve :)

Don't give up your day day job just yet fella! :tongue: I'm off there in March for my Stag Weekend. I'll drop you a line to get the lowdown on where/not to go if you don't mind.. Not been there for a couple of years now :( CheerZ Steve :)