Everything posted by MarkDerby
-
What's a sensible boost for a 300zx on stock engine?
its not all to do with how much Pressure the turbo can Provide .... Volume of air is the key factor in performance and using one turbo for 3 cylinders = more volume of air from that turbo per cylinder but all so your referring to a 2.0lt engine and one tub it will need more PSI to hold the volume of air for the 4 cylinders
-
What's a sensible boost for a 300zx on stock engine?
you may have got lucky and all your Zeds been slightly modded with controller or boost jets and remaps .. as Most drivers that own Zeds its one of the first mods to be done ... More Power
-
What's a sensible boost for a 300zx on stock engine?
we will get there soon .. :)
-
What's a sensible boost for a 300zx on stock engine?
Nope Stock Boost is 9psi .. Combined
-
What's a sensible boost for a 300zx on stock engine?
yes we got what u said and we gave you PSI spec in combined pressure ... 14psi Max so that would be 7psi each turbo DO NOT RUN at 20psi
-
What's a sensible boost for a 300zx on stock engine?
not sure where u been reading but 28psi !! u blow the engine up .. Stock boost is 9psi .. with a remap u can up the boost to 13/14psi ish after that u will need other mods intercooler injectors diffrent remap turbos all the boost spec is shared between both tubs
-
FAO AndyP
opps .... hope not i need a ECU chip from him ... this week / next at the lastest ..
-
Jap Show 2012 sunday 17th of june
Driver and Ticket Update Not long left now guys come on lets get names down 1- Vodkashots---- Pay on the Day Stand Pass's Sent 2- Markdarby-----Paid ( stand ) 3- Artztogo-------Pay on the day 4- KJZ32---------Paid ( stand ) 5- jap.slapper 6- Gonzo12c------Pay on the gate and will probably be on the bike in show and shine area 7- Ceejay 8- Cheshire300zx 9- DLZ 10- ianl Stand Pass Sent 11- Steve black 2 seater wide kit 12- Luke 80% 13- Arfan this is the white car in the photos 14- Cyberbean with another zed and supra (pay on the day with 3 stand passes) 15- JJP 16- RustySills Sharing a tent with Andy Isherwood! 17- Baz 18- jonce ( pay on Gate Saturday/Sunday Stand Pass ) Stand Pass Sent 19- Boldy and Mantav8 ( pay at the gate and stand pass ) 20- Pixas ( Tickets @ Gate + Stand Pass ) 21- Ryan 22- Rolandas ( Tickets @ Gate + Stand Pass ) Stand Pass Sent 23- nncferreira (2 tickets + stand pass ) ( Zclub.net ) 24- ShelZX in her white 300 25- tomomontana ---- ( paying on day + 1 stand pass ) 26- rustysills ----( pay on day + 1 stand pass ) 27- 300zx_666 (Pay on day + 1 stand pass) 28- johnymd---- ( Pay on Day + 1 Stand pass ) ( zclub.net ) Sat only
-
FAO AndyP
I have pm'd him but hes not been on for a few days ... to what i can see ... will send an email direct Mark
-
FAO AndyP
AndyP if u see this Please PM/reply to this or any one know his number can you text him for me please Mark
-
I hate my work people
lol funny
-
FAO John Dixon
Hi John can you Give me a call please on 07794015646 its urgent .. as tried emailing you but dont think there getting to you Mark
-
Again - vacuum question
they are located on each side of the engine just under the upper black boost pipe that can be seen when viewing engine from the wing side
-
Time Attack 2012
turn your boost gain down and the boost setting and make sure you have a Max boost limit set to what ever u dont want it to go over ... Boost gain is for how fast/hard it comes in having this set to high gives you boost creep Boost setting thats just your desired boost Boost Max set ... if u dont want to run any more than 18psi ( guessing ) set it to that ... no mater what the turbos try and do it will not go over assuming u have a decent boost controller
-
Guess what .......................Engine out again
My ones looked worse than this check this site out http://www.motoiq.com/magazine_articles/id/1508/engine-tech-building-the-nissan-vg30dett-part-1.aspx
-
Guess what .......................Engine out again
it is on the holes on top middle of the engine i should of tuck a pic before i worked on it ...
-
Guess what .......................Engine out again
can not beleave how bad the water way design is on these engines ... the amount of over casting left in there is shocking anyways just spend good hr or two opening the water ways and removing the over cast on all 6 channels and even the Pump side it had about 3/4 hole due to cast it now has 1.3" hole
-
What tattoo do I have? Show us what you got
Found this on another forum
-
I'm wet :)
the adjuster is behind the door card there is a screw with in a lock nut
-
Jap Show 2012 sunday 17th of june
Driver and Ticket Update Not long left now guys come on lets get names down 1- Vodkashots---- Pay on the Day Stand Pass's Sent 2- Markdarby-----Paid ( stand ) 3- Artztogo-------Pay on the day 4- KJZ32---------Paid ( stand ) 5- jap.slapper 6- Gonzo12c------Pay on the gate and will probably be on the bike in show and shine area 7- Ceejay 8- Cheshire300zx 9- DLZ 10- ianl Stand Pass Sent 11- Steve black 2 seater wide kit 12- Luke 80% 13- Arfan this is the white car in the photos 14- Cyberbean with another zed and supra (pay on the day with 3 stand passes) 15- JJP 16- RustySills Sharing a tent with Andy Isherwood! 17- Baz 18- jonce ( pay on Gate Saturday/Sunday Stand Pass ) Stand Pass Sent 19- Boldy and Mantav8 ( pay at the gate and stand pass ) 20- Pixas ( Tickets @ Gate + Stand Pass ) 21- Ryan 22- Rolandas ( Tickets @ Gate + Stand Pass ) Stand Pass Sent 23- nncferreira (2 tickets + stand pass ) ( Zclub.net ) 24- ShelZX in her white 300 25- tomomontana ---- ( paying on day + 1 stand pass ) 26- rustysills ----( pay on day + 1 stand pass ) 27- 300zx_666 (Pay on day + 1 stand pass) 28. Slick Pete. 1 stand pass Sunday.Getting advanced ticket soon!
-
What tattoo do I have? Show us what you got
this is my one and one of my lads
-
turbos
your not going to get them m8 unless some one sells you a unused pair and the chance of that ... well u have better luck finding a needle in a hay stack its not wise to buy turbos that are used and do not refurb them .... nothing like taking your engine out twice thats for sure ... at least if u buy my ones or others ... get them refurbed and then its engine out anf back in the same day/next minimul time and effort and Cost
-
Guess what .......................Engine out again
Just a quick Q ... had the heads skimmed and 7thou has been taken off both ... just wondering what size comtec gasket ...
-
Jap Show 2012 sunday 17th of june
ok m8
-
Jap Show 2012 sunday 17th of june
are you going on the sunday or both sat/sun .. as if your going just sunday i will be handing stand pass's out between 8am>8:45 if your doing sat/sunday show i will need your addy to send pass out ..