mantav8

THE WIFE SAYS IT LOOKS OK :slap: BUT WON'T KNOW IF SHE LIKES IT UNTIL SHE'S HAD A DRIVE :shock:

If Anyone's Considering Painting Their Calipers This May Be Of Interest.wen't In Halfords'' How Much For A Caliper Paint Kit Mate'' I Asked,''23 Pounds But We Do Our Own Brand'' Came The Reply. Now The Kit Was A Foliatec One With Cleaner,primer,brush Etc,the Halfords Paint Was Just That,but A Quarter Ltr Tin,so Armed With A Tin Of Brake Cleaner And A Brush Did All 4 Corners Today-and Only Used About Half Inch Out Of The Tin.results--brilliant --cost Of Paint--9.99 And Loads Left :d

No It's Not Normal Mate,u Should Be Holding Pressure For 3 Minutes!-if Not U Got A Leak,getting Hold Of A Coling System Pressure Tester Could Help No End In Finding Your Leak Hth ;)

300ZXseeker--WHAT HAPPENED TO THE OLD FELLA WITH THE ZED? thought u were sorted :confused:

NICE WHEEL :bow: WOULD LOVE ONE ,BUT WANT TO KEEP THE CRUISE.NOT BOTHERED ABOUT THE HICAS,ANYONE KNOW HOW TO DISABLE OR CAN I JUST REMOVE THE SENSOR? CHEERS :)

MAKE THE LIGHTS POP UP :confused: :confused: DON'T U JUST LOVE EM??

SEEN ANYTHING U LIKE?? :dance:

COOL!! ANOTHER ZEDDER!!HOPE/KNOW YOU WILL LOVE IT :dance:

NEAR ENOUGH COS :dance: IF WE KEEP GETTING THE NUMBERS WHAT ABOUT A MEET?SURE WE CAN FIND A SUITABLE LOCATION[PUB] :duffer: :duffer: :)

The S/h Lump Option Is Probably The Way To Go,if You Dumped The Oil,bottom End Is Almost Certainly Sh@@ged!,do Some Digging-tried Andyz?hth :)

be great dude!-only this weekend i'll be mostly on the drive looking after baby :D :D

:confused: :confused: eh?

:tongue: :) :)

The Two Hoses[about12mm Diam]should Go To The Cooler Spigots On The Side Of The Rad,if U Checked The Tranny Level After Removal And It's Ok,then No Probs-this Is Assuming We Are Talking About The Right Hoses? Hth ;)

Didn't U Get A Manual With It?-the Plainveiw Switch Allows You To Programme The Clifford[turning On/off Different Features Etc] My Advice---don't Touch It!!! There Has Been Posts On These Alarms And I Don't Think Anyone Has Had Success With The P/view Switch Hth ;)

Hi,u Sur It's A Fan-not An Aterix?? Has Your Car Got A Clifford?? Sound Like The Plainview Switch To Me? ;)

Might Take U Up On That M8-specially When Sommat Foooks Up ;)

HIYA VINZ,IS THAT GIVE U A BELL IN GENERAL,OR WHEN I'M ILL?? :rofl:

DON'T MATTER ON THIS MACHINE IT GIVES BOTH-MAN CAME TODAY-SAID IT WAS FOOOOKED!!,ASKED IF WE'D BEEN PLAYING FOOTBALL WITH THE SENSORS-CHEEKY SOD! :smw:

U GOT PM BUD :D

Well Seeing As I'm A New Guy It Will Probably Be The Stickers??? Cheers ;)

DUDE PAID UP AN READY TO GO -BUT NOT RECEIVED W/PACK[i DID READ IT RIGHT DIDN'T I?] :confused:

ISAY YER BUYONE YER GET ONE FREE,ISAY YER BUYONE YER GET ONE FREE! AARRRRGHHH :mac1: :mac1: :mac1:

First Off Either Remove The Fuel Pump Relay,or Go In The Boot And Remove The Fuel Pump Cover Plate And Disconnect The Wiring Plug On The Pump,start The Engine,when It Dies,crank It Over A Couple Times,this Releives The Fuel Pressure,locate Your Fpr And With Some Rags Handy Remove Connecting Pipes[3]when Fitting The New Valve Fit New Pipe-as Willieo Says It Will Probably Be Sh@@ged!! Refit Relay/plug If Not Already Done So,start Engine Check For Leaks :)

NOT FAR THEN, I'M IN HUCKNALL :cool: