mantav8

Well everyone in the world knows your address at least!! :eek:

Yep knew i saw it somewhere!

ERRR,Pretty sure i saw a drain plug on mine,have to check that one! :D

Right when i got the panel i had to push one side in about 1/2 an inch-no probs there.Being f/glass,when it was baked to cure the paint i reckon it"straightened out" slightly as it was laid on a trestle to bake.When fitting after painting i had to push both sides in around 1/2 an inch.Just something to be aware of when baking.HTH ;)

Fibreglass m8 ;)

Can't help wondering just how many people HAVE sent money,And how much have these t@ssers made? :mac1:

Right,got em fitted today,bit of a bitch to fit[think the baking didn't help] Anyhows abit of messing and heres the result! :hyper: Ripped the oe spoiler off today as well to fit t/gate skin,but thats another story/drama :( As the pics show the fit is brilliant!

Hi m8,the ptu is on the left of the cambelt cover as you look at the engine[silver box type thingy!]-just need to pull off the connectos and clean the terminals with contact cleaner or equivalent,be careful with the plug though as they go brittle.HTH ;)

Just wondered if you seen the leds lit up?-make up your own mind! :confused:

Must of been one hell of a rear end shunt!! :rofl:

nice looking motor! :bow: ,BTW in the second pic u seem to have run someone over :eek: ;)

Blimey that was quick only saw luke saturday,bugger more work[but the kind i like ;) ]

see the vertical brace in your pic james,thats got to go,and about 3mm of the lower flange,the good news is that you can bolt/seal in the panel and fit the lights afterwards-which is what i intend doing. bulb changing is easy as the screws for the lenses are outside.

yep sure are dude! the guys name is paul and gives good service :eek: erm and very helpful.

Gotta agree about the finish and fit,as for the overall appearance-you wiil know when there in!! :D

try a search for speed sensor or online manual.HTH ;)

Yep deffo bigger,and the fiat lights didn't float my boat either! hoping to get some paint on tomorrow so will be putting up pics as soon as!

hi mate,there are certain tools i spend mega money on,and this is one of 'em! you want to get something decent,i.e. snap-on,then in cheaper order the likes of MAC or Britool.Remember these need calibrating regularly so a decent one should last longer before it needs it.HTH :)

Yes mate,both types luke sells are different,i.e fiat coupe or led's these are units fitted to the 2001 diablo,so the guy tells me!

Got the lambo light kit i ordered off ebay today,got to say well chuffed with the quality! :dance: i even got a bit of masking tape stuck on to tell me what wires go where!![he must know he's dealing with a dipsh!te] anyways pulled the original lights out tonight and trial fitted the panel,guess what! it fits,comes with 6mm bolt to mount to original holes. Also got the skirts today and even these need only minor fettling to be snug fit!! some pics below-sorry about the quality as the flash seems to be buggered :mad:

try posting in the traders section m8-look for andyz-second hand parts,u might have more joy there! ;)

if you suspect plugs,pull em out,then try swapping coil packs to see if it improves,also check the connectors for cr@p!-easy things first! :)

not sure as never done one! easiest way is to pull off the old one and compare pulley sizes,mounts,output etc. or you could wait for someone who knows better,good luck! ;)

err,just wondered what you was gonna do with the vented panel mate? ;) ;)

got to agree! myself i got this ''who gives a sh!te'' attitude,each to their own!