vijay

Hello Martin, When I insured mine I asked for a gauranteed value whhich meant sending in photos and a signed declaration of what I'd had done to the car. Vijay

can you add it to your rides? Vijay

cheers Jeff, really appreciated!! Vijay

cheers Jeff. Got a problem with Jaz's car where the conzult is not reading any coolant or fuel temp. Eric thinks it might be a problem with the ecu:( :( So I might still be able to plug a Jap one in and see if it reads anything, shouldn't do any damage should it?? Vijay

Hello guys, Here's a much easier way - http://www.twinturbo.net/ttnetfaq/FAQpages/ECUdiagnostics.html Vijay

Can anyone confirm if a jap ecu will work in a UK car. The car is an auto if that makes a difference and the ecu's would both be from autos. Cheers Vijay

well my heater matrix has never gone, but I don't want it to either:( Would it do any damage by using it anyway? I have to reflush it in the summer when I change the rad hoses. Cheers Vijay

so normal anti freeze is not enough?:confused: Vijay

did Luke warn you to be very careull with the perspex bit?? it's VERY fragile (if not supported from both ends when lifting it). The guy who fitted my first one cracked it:( Vijay

when you say green/red, is it green with a red stripe or vice versa? have a look here - http://300zx-twinturbo.com/cgi-bin/manual.cgi?list=el&dir=&config=&refresh=&slide=93&cycle=off&scale=0&design=default&total=133 Vijay

the green/red wire might be the feed to the rear amp. Vijay

I believe the feed from the tailgate lamp would be from your light cluster. Get a tester to see if you have voltage up to your light cluster. If you need a hand, I'm just down the road near Brent X. Vijay

I think Aaron already mentioned it, you can make up a small circuit board that will light an led when the car is in safety boost -http://home.swipnet.se/e-solutions/SB-ind.html I got one made up and it works (tells you you're in safety boost). Vijay

Hi Geoff, Just one bit of advice, find out how they fix it on and seal the join. I had it fitted by a bodyshop that I knew and they done the seal with mastic and twice it was painted and twice it cracked. My car went to PPS and he removed the mastic and used fibreglass (I believe) to fill the gap - no cracking since. Oh yeah, Peter (PPS) removed the spoiler with a bit if brute force as the person who put it on originally didn't bond it properly :eek: Better to check first :) Good luck, Vijay

I've driven my mates NSX and to be honest I wouldn't swap my Z for it. I hated the driver's position and wasn't too keen on the VERY large front screen. The raw feeling of power was something else though - certainly moves :) Vijay

would this be of any interest ? - http://www.300zx.co.uk/forums/showthread.php?s=&threadid=15188 Vijay

Flying machine, Do a searh on that garage, then decide. Vijay

Clarkey, What's the score with the needles then? :confused: Vijay

cos I've got a 3 o'clock meet in the pub tomorrow to watch the footie :) and I can't do 2 nights drinking anymore :( I'm too old...... Vijay

done. Vijay

done.

sent to both of you, hope you've got hi speed dial up :) Vijay

Hello Paul, There was a write up in Jap performance a little while back on buying and specs. If you want, I can scan it and email it over to you or your friend. Vijay

cheers Andy.

Craig, It won't let me delete files. Vijay